WiFi does not connect to the home network

IM currently problems with my wifi on my new z3 compact network.

My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

Any help would be appreciated & ty in advance.

Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.

Tags: Sony Phones

Similar Questions

  • Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

    Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

    Use a static IP address and see what happens.

    How can I configure my static IP address?

  • Printers HP 4622 does not connect to the home network

    Third day, I tried to connect my printer to my wireless network.  I have reset the router, checked all firewalls, print the network configuration page... still no luck.  I even tried to connect the printer using a USB CABLE from the computer to the printer... still not connect even with the connection of the USB CABLE.  I'm starting to think it's the printer itself.  The printer is still under warranty, the wireless light will continue to Flash even when the wireless option is placed in the position "on".  All my computers 'see' the printer, but still the readings that the printer is "offline".  I have reset the defaults on the printer again... Please help... Thank you

    Your router is configured to display your SSID right?

  • Problem with my Acer laptop does not connect to my home network.


    I had a problem with my laptop. The laptop does not connect to my home network.

    I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

    My specs:

    Acer Aspire 4250 ongoing Windows 7 SP1.

    Dlink DSL-2730u (secure wifi with WEP 128 bit key)

    Please solve my problem...

    Original title: problems with my Acer laptop

    Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

    If this is the case try to configure WPA2 or WPA rather than fall to WEP.

    Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

    Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

  • Motorola Milestone does not connect to the corporate network after updating to Froyo...

    I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

    The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

    Any help? Please, I beg you.

    Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

  • CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

    Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

    This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

    Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

    Thank you very much!

    Try to uninstall the Atheros driver, you have now and install another:


  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • Get a "not connected to the home network" error while trying to print

    * Original title: printer problems

    Hello I have a HP Officejet Pro 8600 that I bought at Best Buy, and I have printer problems, I ran the troubleshooting on my control panel from my computer and it says that it is not connected to the home network which can do on my end to fix, I'd appreciate any help, thank you very much!

    Hi John,.

    I will certainly help you in this matter.

    -Have there been recent changes made on the computer before the show?

    Method 1: Run the Microsoft Fix and check.

    Diagnose and automatically fix problems printing and printer




    Method 2: update the printer drivers and check.


    Find and install printer drivers in Windows 7



    Update drivers: recommended links.



    For more information, see the links.

    Printer network problems (applies to Windows 7)




    Why can I not print?

    Printer in Windows problems

    If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

    Thank you.

  • Satellite L350 does not connect to the internet, network adapter yellow exclamation

    Trying to help my Nan with his laptop...
    Model is Satellite L350-170

    Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

    She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

    All the drivers can be downloaded from the Toshiba UE driver page.
    Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
    Then, you will get the list of drivers.

    If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

    You asked how to remove the network card?
    Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
    Click the single LED adapter, and then press or click on uninstall button driver

  • My computer does not connect to the wireless network

    My computer does not connect to a wireless network. It's almost like there is no WiFi. I go into the settings and nothing is. I know that the networks are there because the other computers connect to it. He says always "no connection available. When I try to pull of boredom he tells me to plug an Ethernet cable, which is the thing that I try to avoid. I want to connect to WiFi.

    Based on this information, your laptop isn't wifi, it is turned off, or it is broken.  A wifi used to work?  If so, what happened to your system, just as the problem started?

    Type "Device Manager" in the search box and press ENTER.

    • Look in the Device Manager to the network adapter section.
    • What devices are listed?
    • Are there warning icons?
    • It appears to be a wireless adapter, what's his name? Double-click it and to report to what is shown for "State of the device.

    You can also provide additional diagnostic information:

    • Type 'Information system' in the search box and press ENTER.
    • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
    • Paste (CTRL + V) the data in your response here
    • Return to system information window and click on the + next to "Components", then click on the + next to "Network", then click on 'map '.
    • Select all (CTRL + A) and then copy (CTRL + C)
    • Paste (CTRL + V) the data in your answer below, other data Information System
  • Satellite A300 - does not connect to the secure network to WPA

    Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

    I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

    Would be grateful for your help.

    Thank you.

    On the Toshiba site is a newer version of the driver available (
    Then I would try the new driver.

    Consult the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Admire my samsung smartphone does not connect to my home network

    When I try to connect a Samsung Admire smartphone to my home network, it fails. The modem connects with all of the computers in the House but not the phone.

    It's a simple process to connect, but the end result is the false reading disabled on the phone screen. Disability statement is in what regards the network

    be disabled, but it works very well. I checked the articles etc... and many people with this phone are the same problem. I have yet to see a solution that will be

    works for me.


    I suggest you to contact Samsung support for better support for your phone, you are able to connect all computers to the home network, and only you are faced with the question with your phone.


  • Computer laptop XP does not connect to the broadband network.

    I'm trying to connect a laptop Medion XP to our fiber BB home connection using a Wi - Fi connection. However, our network (which uses the WSP) is not yet displayed in the list of available wireless networks. WSP n/w of that another neighbor (no fiber) is displayed (while I should be able to see several other networks). So I tried to connect the laptop to the router with an ethernet cable, but it still does not see the network. I checked this automatic dynamic DNS and IP addressisng is activated, and I installed the SP3 download first on my PC. However, this made no difference. Any suggestions please?

    Hi, thanks for your response.

    1. I talked to the ISP and excluded all router problem.
    2. There is only one other pc connected to the network. We connected the other phones before and never had a problem.

    According to me, it's that the laptop is old and may be damaged. A grumpy at work looked for me and we can't even get a wired connection works.

    Time it's bin and get a new one, I think!

    Thanks again.

  • G60-230US == > does not connect to the wireless network


    I got my new laptop a G60-230US with Windows Vista Home Premium SP1 yesterday... I was so excited. I quickly put in place and the network manager. He finds my home network (a router we Robotics MaxG 5641), had the exceptional signal strength, I have provided the password. It didn't connect to the network. I have 3 other devices without any problem. Then I disabled the firewall, antivirus etc. on the computer, I've disabled the security on the router and tried... Still no luck. I called the help desk yesterday evening, and a clueless CSR tried to 'Help me' After I turn the router, computer, WIFI (everything that I had already tried), she suggested that I should contact my ISP and get a new password. I explained to him that the password has been created by me for my own US Robotics router and ISP had nothing to with her... She just kept saying the same thing... and I politely thanked her and hung up at midnight...

    This morning, I tried something else. I tried ipconfig / all and I don't have any useful info, except that it says "Device off" I tried ipconfig/release and he told me that the action must be raised. I am the administrator on this computer.

    U.S. Robotics indicates that this default router should work for Vista, because a router is independent of the operating system

    Any idea is extremely appreciated...

    Thank you!


    I went to the office today max and I bought a new router D-Link Wireless N for $40. Came home and set up... and this baby is immediately connected to 130 Mbps! I'm all set... Great computer... I'm glad it works...

    I invite all who have problems with wireless to swap the router and check again...

  • Map Wi - Fi on Satellite L40 does not connect to the wireless network


    I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

    Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

    Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

    Thank you



    Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

    Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
    You should also try to reset the settings of the Wlan router.
    Sometimes it helps.

    I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

Maybe you are looking for