WiFi does not work on Satellite C50 - B - 14 d, but shows the connection

Similar Questions

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• WiFI does not work on Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  WiFi does not work on this laptop, even with the switch at the front, running and when I put in a USB WiFI module with an external antenna I get a very bad signal from my router wireless in the next room< 20="" feet="">

  Hello

  I found the specification for this old Satellite M105 series data sheet:
  [Satellite M105-S1021 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1372978& rpn = PSMA2U & modelFilter = M105-S1021 & SelCategorie = 2756709 & selFamily = 1073768663]

  Looks like the laptop was equipped with a map of Atheros 802.11 wireless network b/g.
  If your internal wireless network card does not, even if you have enabled the external WLan switch, then I recommend check device manager first check that the area of Wlan Card network adapters usually map Atheros Wlan must be there if its not listed, install the Atheros Wlan driver

  In addition, next to the switch hardware Wlan, you need to activate the WLan using Fn + F8

  Regarding the USB dongle and a weak signal of Wlan:
  Well, maybe the USB dongle aerial signal is too low on the other hand you should test connectivity using 802.11 B or 802.11 G standard only

• WiFi does not work on Satellite L30

  Recently, I replaced my old laptop running Win 98 with a new Toshiba L30 running win Vista with built-in WiFi. Except for that the computer sees my wireless router, my computer does not connect to the router, a router to link DI 514 D.

  The computer picks up and works with our neighbors wireless router

  I tried to use the Gc Nectore 310 of the old laptop PCMCIA card but Vista insist arrives with a driver, but does not list as an option in a network or connect menus, Netcore CD XP driver does not work

  advice please

  Hi mark

  In fact much 3rd devices and manufacturing did not have Vista drivers for own products for different reasons.
  PCMCIA card from Gc Nectore 310 is not about me, but you should ask the card for Vista drivers making.

  You said the laptop captures and works with our router wireless of neighbouring s. In this case, nothing wrong with the network card wireless laptop, but with compatibility between the WiFi router and wireless network card.

  In case of you, I would check if the card supports the same standard Wlan (802.11 A, B, G) as the router.
  You can also try to disable security settings and try to connect without encryption settings.

  I had a similar problem. Finally, I find that my card did not support WPA2, but only the WEP and WPA encryption.
  In addition, disable your filtering router's MAC address.

• A WI - FI connection does not work on Satellite C50-A-179

  Hi all!

  I am owner of laptop Toshiba Satellite A-C50-179 (PSCGAE) with Windows 8, and recently I tried to install Connectify on it.

  However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop and given this Connectify couldn't work. I tried to activate/install somehow using advice found on the internet. The suggestion was to reinstall the driver for the wireless adapter.

  I uninstalled the driver original and reinstalled again after you download from Toshiba Web site ([here | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7934 & selSh ortMod = 3969 & language = 13 & selOS = 40 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 86778 & DISO = 40 & driverLanguage = 42])

  I'm sure that I downloaded and installed the right driver for the right card that is "Qualcomm Atheros AR956x Wireless Network Adapter". I made prior to installation to verify all the information on the adapter and the driver.

  However, after the relocation wifi stopped working completely:

  -l' icon/network adapter wireless connection 'Control of the network connections and Internet\Network' is there but it does not behave as it should, it looks like a generic and not specific to a network connection icon - basically, it does not represent the actual adapter and got the name of it in the note;

  WiFi - option in Windows 8 settings menu-changes PC network settings has completely disappeared (bluetooth option is still there and so is the flight mode option);

  -wifi can be turned on by pressing on activate in the menu of RIGH click that generic network connection I mentioned, but it will not pick up any signal and will find all the same connections so it is certainly.

  There is no yellow exclamation point in Device Manager list and the wireless adapter is thus, to act and to pretend as if everything is fine and working properly.

  I tried troubleshooting, installing the driver using Windows Update, the installation and update of its properties menu driver in Device Manager and all kinds of things like that, but none of this has helped and wifi still doesn't work.

  Basically, the laptop seems to think that the adapter is not working properly and everything is fine HW and SW wise, but in reality it is not. I don't really know what I should try, I don't want to reinstall the entire operating system, because I'm afraid (or I) would mess everything up even more (wasting yet more pilots).

  I'm running on a cable internet connection now, and I'm happy it's working (I really need the laptop for work and I can't afford to lose for a day, not to mention some more)

  Could someone help me please?
  Any ideas how to solve this problem and make the wifi working again?
  I will be really grateful for any advice.

  Thank you, Miko31.

  Problem is that Toshiba does not support the third party software and if the problem occurred after installing Connectify you should contact support and ask for help. I mean they know how their software works and perhaps a workaround solution that can help you.

  This software is not known to me, but I can imagine there are now a few conflicts. What should do? It is not easy to say. Try to remove the preinstalled software and clean the registry entries.

  In the worst case, you must reinstall OS and reuse for laptop with factory settings.

• WIFI does not work on the Satellite L650/078

  Hello
  Hoping someone can help, on my Satellite L650 WIFI does not work.
  No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.

  Any ideas on how to solve this problem?

  Hello Covie

  Do you use the laptop with the factory settings?
  When you use the FN button you find cards flash at the top of the screen?

  Try please restart flash cards. Start > all programs > Toshiba > utilities.

  Please post comments.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite L300D - installed XP and now my wifi does not work

  I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
  Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.

  Thank you

  You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.

  Select:
  Laptop
  Satellite Pro
  Satellite Pro L series
  Satellite Pro L300

  Download and install
  -Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007

  If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• WiFi does not work on my Satellite C660-1 t 9

  I get a new Win7 64 bit and the FN and the wifi does not work after that.

  I need help please.

  Sorry, but we can't look for a solution on this path.
  Please be kind and offer some basic information which can be very useful for people who want to help.

  Use you own the OS version or the original version you got with your laptop?
  Is the network card wireless installed correctly (status in Device Manager)?
  Toshiba VAP is installed on your machine?
  You can use flash cards and FN + F8 option to activate the wireless card properly?

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.