WiFi does not work on the battery!

Similar Questions

• WIFI does not work on the Satellite L650/078

  Hello
  Hoping someone can help, on my Satellite L650 WIFI does not work.
  No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.

  Any ideas on how to solve this problem?

  Hello Covie

  Do you use the laptop with the factory settings?
  When you use the FN button you find cards flash at the top of the screen?

  Try please restart flash cards. Start > all programs > Toshiba > utilities.

  Please post comments.

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Satellite U840W-10J - WiFi does not work after the mode 'sleep' - Win 8.1

  Ladies and gentlemen,

  I bought a Satellite U840W-10 days; PSU5XE on Windows 8 was preinstalled. I've updated to Windows 8.1.

  My wifi works until the laptop goes to sleep once, then it does not any longer and I have to restart as it cannot connect to the Internet again once.

  I use a VPN as well.

  I've already updated the wlan Driver and many other drivers as well but nothing helps.

  Thank you for helping me
  123XYZ

  Try this:
  (a) press the Windows key + X, select Device Manager.
  (b) right click on network adapters.
  (c) click on properties and select the power management tab.
  (d) uncheck the box allow the computer to turn off this device to save power.

  Finally restart the system

• WiFi does not work if the SSID is not broadcast by router

  I have a new 55HX929 and tried to connect to my wifi with its built-in wireless adapter. I do not broadcast my network SSID the router for security and privacy. The searched TV network, does not, and then it asks to enter the SSID. Then, it saves the information and trying to connect but fails. If I enable SSID broadcast on the router and then the tv connects fine but I don't have to do. My tivo with its usb wireless adapter works fine with the SSID broadcasts do not when I configure the network settings. On the same stand as the TV with the power of the signal fine. I am currently using a wireless connected to the ethernet jack TV bridge to work around the problem, but it's a waste when the tv should work with a standard network configuration.

  Reading sortiesdvd.com, people have the same problem with NX720 and Sony Google Internet tv. So it seems to be a common problem with Sony games.

  I tried online support chat, and they were not able to help. Everything they told me to do was reset the router and tv which does not help. I don't think they understood that a SSID came from how they responded to my questions.

  Can we get a fix for this?

  Thank you for your messages. We have forwarded your comments to Sony engineering for future updates.

• AC adapter does not work if the battery is not removed on my Satellite?

  A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

  Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

  Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

  I don't think so, it's a motherboard problem?

  Hello

  It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
  But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
  But the battery is ok and AC adapter works as well as you suggested.
  What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
  Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

  But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• My Microsoft Intellimouse does not work although the battery and USB connection is all good.

  HID Non user input data filter update failed with error code 800F020B - is - it?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  ؠ Which is the update does not install?

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  IntelliMouse: Wheel or buttons not working not properly

  http://support.Microsoft.com/kb/305820

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  For more information, see the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/9a5a1cb9-4f4e-49c1-9356-5a3ad2782fc5

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if you get the error message.

  Windows Update error 800f020b

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My Wifi does not work after the update of the software.

  I've updated my wifi "Qualcomm Atheros 802.11b/g/n WiFi Adapter QCA9565" and now my wifi is dead, his does not. I need help.

  Hello

  Roll back driver can help. Please try

  Start > Control Panel > Device Manager > network adapters

  Right click > properties > Driver

  Select "roll back driver".

  Good luck.

• Suddenly wifi does not work after the computer restarts

  After that I restarted my netbook, it is no longer connect to any wifi public my ipod has no problem. It seems that I can connect to the router but no internet and no ip address. When I connect woman manully, it acquires the router's ip address. I can't even restore the system. When I tried to open IE, my alerts firewall running TCP/IP. Please help me.

  Hi yuanlinsh,

  · What is the number and the model of the computer?

  · What is the service pack installed?

  Follow the methods below:

  Method 1:

  Disable security software and firewall temporarily on the computer and then try to connect to the internet.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

  Method 3:

  Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi does not work after the Downgrade for Win 7 Ultimate

  Solved thanks

  Hello:

  Use the drivers for W7 HP 2000z-2 has, except the wireless.  Do not use any BIOS or the files of the firmware of this model on your.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275376

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&OS=4063&product=5388155&sw_lang=

• WIFI does not work on the computer.

  I have acer laptop and recently upgraded gateway for windows 7 64 bit Ultimate edition of windows 7 Home Basic. He disabled wifi and watch card that is no longer. I tried many ways, and I couldn't find same on Device Manager. Help, please.

  Hello

  You will need to go to the Acer Web site > key in your Acer model number and OS > finding drivers 64-bit Windows 7 for your specific model.

  Choose the right drill bit version of your operating system: Windows 7 64-bit.

  If they are available, download and install them.

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon.

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.