WiFi is connected but not functional

Similar Questions

• WiFi is connected but I can't connect to the net, what to do?

  WiFi is connected but I can't connect to the net, what to do?

  Hi Torrespa,

  1. what happens when you try to connect to the internet?

  2. were you able to use the Wi - Fi connection earlier?

  3. what brand & model of network card?

  You can follow this link & check if the problem persists:

  How to fix wireless network connections in Windows XP Service Pack 2?

  
  Reference: Wired and wireless in Windows network connection problems

   To set up automatic wireless network configuration

  Hope the helps of information.

• E4200 Mac connects but not PC after crash

  We had a power failure.  Connection Wi - Fi disturbed and has not corrected itself as in the past.

  A MAC and android os phone will connect but not PC with different operating systems.

  Wired computers will connect and go on the internet but not when try wireless on windows PC.

  I have a comcast modem and a router wireless e4200.

  Tried the re-engining of the modem and the router.

  Tried to unplug Cisco on computers and then reconnect to wireless connection.

  Sometimes laptops will discover the excellent show and Cisco of the signal power but does not connect.

  Wireless is enabled on laptop computers.

  Do not know what has changed this causes for the victory of the PC only.  (IP? etc?)

  Any help is appreciated.

  Thank you.

  Thank you for the answers.

  I did a factory reset within the connection on the router.

  After resetting my settings it works fine.

  No idea what scattered settings.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• connected but not connected

  Hello
  on 11g on HP UNIX.
  
  Can not understand: connected but not connected:

  sqlplus sys@+ASM as sysdba
  
  Enter password:
  ERROR:
  ORA-12154: TNS : 
  Enter user-name: sys as sysdba
  Enter password:
  Connected.
  SQL> select * from v$instance;
  select * from v$instance
  *
  ERROR at line 1:
  ORA-01012: not logged on

  Any idea?
  Thank you.

  sqlplus sys@+ASM as sysdba
  ORA-12154: TNS:
  Enter the user name: sys as sysdba

  SQL > select * from v$ instance;
  Select * from v$ instance
  *
  ERROR on line 1:
  ORA-01012: not connected

  You connect to the instance by TNS connect descriptot ASM?
  Which alert log file shows?

  tnsping + ASM

• connect to the wifi of comments, but not host wifi

  It's a mystery. I have a Dell Inspiron 15R N5110. This laptop is one of the many devices in my house. All connected to a DLink DIR-655 router. But, this machine will ONLY connect to the wifi guest account and not the wifi of the host. Very strange. All other devices connect correctly. Also, this Dell laptop connects fine to another outside my home wifi network. It runs Windows 7. I thought it might have something to do with the virtual Miniport adapters, but really am puzzled now. Any suggestions?

  mptsep,

  Start, Control Panel, network and sharing Center, manage wireless networks. Remove all the networks that you are having problems with, then try to log in and see if you can.

  Can you run REMOVE YOUR PRODUCT ID and the OWNER UNREGISTERED research information system and publish the information here.

  What program anti-virus and firewall are you using?

  Rick

• Cisco vpn 5.0.07.0440 - k9 connected but not the network remote access to Windows 8.1 pro

  I use 5.0.07.0440 - k9 vpn Cisco and Cisco vpn 5.0.07.0290 - k9 both version on our 8.1 Windows Mobile pro.
  VPN connected successfully, but not remote access network and receive no ping.

  But when I try with wifi and vpn, then good job.

  Please help me as soon as possible.

  Thank you
  Sanjib

  It is very problematic on Windows 8 and EOL now.

  Kind regards

  Nehmaan

• RTMP server connected, but not video in the player. HTTP works very well

  Hello

  
  

  Here, a problem, I put http server which is connect and video game,.

  But server rtmp connected but the video does not.

  Trace of information :

  trace (event.info.code) = NetStream.Play.Reset, NetStream.Play.Start (output in flash)

  http Host

  ------------------

  var videoURL:String = "http://www.helpexamples.com/flash/video/cuepoints.flv";
  var connection:NetConnection;
  var stream:NetStream;
  var video:Video = new Video();
  NetConnectionExample();
  function NetConnectionExample()
  {
   connection = new NetConnection();
   connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
   connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
   connection.connect("null");
  }
   
  function netStatusHandler(event:NetStatusEvent):void
  {
   switch (event.info.code)
   {
   case "NetConnection.Connect.Success" :
   connectStream();
   break;
   case "NetStream.Play.StreamNotFound" :
   trace("Stream not found: " + videoURL);
   break;
   }
  }
   
  function securityErrorHandler(event:SecurityErrorEvent):void
  {
   trace("securityErrorHandler: " + event);
  }
   
  function connectStream():void
  {
   var stream:NetStream = new NetStream(connection);
   stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1);
   theVideo.attachNetStream(stream);
   stream.play(videoURL);
   addChild(theVideo);
  }
   
  function netStatusHandler1(event:NetStatusEvent)
  {
   trace(event.info.code);
  }
   
  function onMetaData(info:Object):void {
          trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
      }
      function onCuePoint(info:Object):void {
          trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
      }
   
   
  

  Host RTMP

  ------------------

  var videoURL:String = "filename.flv";
  var connection:NetConnection;
  var stream:NetStream;
  var video:Video = new Video();
  NetConnectionExample();
  function NetConnectionExample()
  {
       connection = new NetConnection();
       connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
       connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
       connection.connect("rtmp://servername.host.com/foldername");
  }
   
  function netStatusHandler(event:NetStatusEvent):void
  {
       switch (event.info.code)
       {
            case "NetConnection.Connect.Success" :
                 connectStream();
                 break;
            case "NetStream.Play.StreamNotFound" :
                 trace("Stream not found: " + videoURL);
                 break;
       }
  }
   
  function securityErrorHandler(event:SecurityErrorEvent):void
  {
       trace("securityErrorHandler: " + event);
  }
   
  function connectStream():void
  {
       var stream:NetStream = new NetStream(connection);
       stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1);
       theVideo.attachNetStream(stream);
       stream.play(videoURL);
       addChild(theVideo);
  }
   
  function netStatusHandler1(event:NetStatusEvent)
  {
       trace(event.info.code);
  }
   
  function onMetaData(info:Object):void {
          trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
      }
      function onCuePoint(info:Object):void {
          trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
      }
   
   
   
   

  I think that with rtmp you want to delete the file suffix... so try:

  var videoURL:String = "filename";
  

• Satellite A-C50-1KQ - WIFI is connected but no Internet access

  Hello!

  Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

  When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
  My driver for the card is 10.0.0270 (17.10.2013).

  Can U help me pls?

  Siana

  When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
  You have the signal full force and the State connected?

  What happen when you try to open a page in the Web browser?

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• WRT54G2 - laptop connected but not surf the web

  Hello everyone, please someone help me... I bought a WRT54G2 and configured correctly... my desktop computer works fine, but my laptop is a problem... I connect to the router via WiFi from via a cable, it connects to the routher and I see it connected, but I don't get internet signal... do I have to open anything in the router?

  Thank you.

  Well well, for some, strange / funny / slash reason I won't be able to understand, I followed all your instructions with no luck... but one night I fell asleep unplug the router of the AC and when I plugged the next morning, all the router settings were reset, as if I flashed. So now I can connect and surf the web. Is this problem comes back, I'll post another message.

  Thank you!!!

• Wrt54g Linksys Wireless Router - connected but not display page

  Halo!

  I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.

  What seems to be the problem here?

  TIA,

  wilardboi

  Please reset the router and reconfigure:

  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Open the configuration of router with 192.168.1.1 page... White-username and password: admin

  To configure the wireless router.
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here the wireless network mode must be mixed
  -Provide any name in the name box of the wireless network (SSID), while
  without space between the two cases.
  -11 wireless channel
  - And wireless SSID broadcast should be enabled and then click

  Save
  Parameters.
  Please take note of the name of the wireless network (SSID) because it is the '
  Network identifier.
  For wireless security: -.
  Now click the sub-tab under wireless > wireless security.
  Change the mode of WEP wireless security
  Encryption must be 64-bit.
  Let the empty password, do not type in anything whatsoever.
  And under type WEP Key 1 in all 10 digits please. Click Save
  Parameters.
  Please note the 1 WEP key as it comes to the security key for the
  Wireless network.

• Two accounts on laptop, one another ok can connect but not acess anything (o/s win 8)

  I have a friend at work, the user account of whose son works well but whose own user account does not work. It can connect, but then the screen seems to keep refreashing. The taskbar appears as a bar grey which appears and disappears in time with its store of ms, desktop and icons to help hp, this happens so fast that it is impossible to click on the desktop icon / pic to enter his office. I guess that he messed up his account settings. R it y of drastic solutions - no obviouse. TIA

  Hello

  Given that the other account works fine, I think the user in question account is corrupted.

  If the issue occurred recently, then you can try using System Restore and check if that helps.

  Performing a system restore returns the system files and settings previously uncorrupted State.

  How to restore, refresh or reset your PC

  Ignore: Refresh and reset of the above article.

  The best way will be to create a new user account and start again.

  Visit this link to learn more about creating a new user account in Windows 8.

  It will be useful. Please let us know the results.

• Unable to access hot mail. can connect but not see e-mail. Works very well with Exployer.

  It is one their recent. Worked well 4 days ago. for the last 3 days that I can go to Windows live (my e-mail account), I can connect, but that's all. When I click on my email, or any tab, tab nothing happens. I can go online with Windows Exployer and it works fine.

  Adblock Plus blocks may be too

  Update your subscriptions in 'Adblock Plus '.

  See "What to do when Adblock Plus blocks too" breast of the following:

  • https://support.Mozilla.com/en-us/questions/893525

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.