WiFi is not connecting to my ipod touch

Similar Questions

• WRT350N will not have my phone, ipod touch, nintendo ds connect wirelessly!

  My wrt350n will not allow my phone, ipod touch, or nintendo ds to connect via wifi

  at least I have remove the wireless security.  Does anyone know why?  I have the latest firmware and I use wep 128bits encryption.

  I found the answer on the website of ipods for troubleshooting.

  I had the 128-bit encryption, but on my selection of router, I got key 2 as password.

  Then I changed all my cameras wireless (that works) and router to select the 1 button and then came the key 1 password for my ipod touch and g1 phone wifi and it worked.  I have to check on nintendo wii, that I had to buy the usb network adapter to do work and nintendo ds to see if it also works.  I'll post.

  * before all this I was typing in key 2 devices works... then the 1 key and it would say it connected but I could not surf the internet so I know that this is the solution without turning off wireless security *.

• WiFi is not connecting

  I have a mini end of 2014. When I went to use it yesterday for the first time in a few days, the wifi was not connected. When I tried to connect, it says it can't connect to my router and you want to run diagnostics, she did, but went to the writing of the file when finished. I deleted the network in the network settings. In the wifi connect icon he registered the network with a signal strong. Asked the password when I tried to connect, then he said he could not connect and you want to run diagnostics. Other devices use the same router wired and wireless, so I doubt that it is the router. The signal is fine, the computer is in a loft with router down under and it is no problem to this place for years. I restarted with hardware diagnostics and he couldn't find anything. Any ideas? I can do almost anything with the generated report? I don't see anything in Apple help to know what to do with it.

  You can turn off and on the router?

  Yo there an error like incorrect password?

• iTunes not recognizing, iPad, or iPod Touch.

  I am running windows 10 on PC and now my Lap top is not my iPad or iPod Touch. He sees my iPod Classic correctly. The computer is to see them, but does not see their generic name nick just iPad or iPod. I followed using apple who advises to look at Device Manager "USB controllers. No driver Apple is seen, they appear as a 'portable '.

  iTunes does not see the iPad or the iPod Touch.

  Tried different cables and USB ports no joy.

  All work fine on other computers that are running windows Vista and 8.

  Hello! Maybe these steps will help you:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• How to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter app

  Regularly I receive notifications of updated Brainiacs Sudoku which I had deleted Ipod Touch 5 g a long time ago.  I can't disable the app update counter until I have download the update.  So, how to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter of the application once and for all?

  Try to hide this purchase

  Hide and show purchases iTunes or iBooks on your Mac or PC - Apple Support

• I get an error 43 trying to connect to my iPod Touch 2nd Gen

  I get an error 43 when you try to connect my Ipod touch 2nd generation. It will not sync or recognize the USB driver. I get an error 43

  Hi Leroy,

  Error code 43 means that a notified device driver the operating system that the device has failed.

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx

  Check out the link for more information.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• WiFi does not connect if the SSID is not broadcast.

  I've updated to Sierra this afternoon. Everything seemed fine after the update. After dinner, my MacBook Pro (retina, 15 inches, beginning 2013) would not connect to Wifi. I reduced to a few things.

  It wouldn't connect the 5 GHz n If the SSID has been hidden. If I admitted the SSID to shown, it would connect without problems. It would connect to the 2 GHz band, even with the hidden SSID.

  I did the typical SMC reset and reset the NVRAM. I deleted the files related wifi and restarted the router and the MBP. I'm obviously on now and the speed seems normal with no dropouts. I can't hide the SSID now and will continue to work until he's asleep; No dice after that without reactivation SSID broadcast.

  Any thoughts?

  See you soon,.

  Fred

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers. They will answer your question: Bug Reporter https://bugreport.apple.com/

• Why the night shift is not available on my iPod touch 5th generation IOS 9.3

  I updated my iPod touch 5th generation for the iOS 9.3 and night shift is not yet available? I've been through the settings and tried to get Siri to turn it on, but he says that it is unavailebl for me. When will it be available? Did I miss something? Thank you

  This feature requires a 6th generation iPod Touch.

• Satellite Pro C660-2JR - wifi is not connecting

  Hello

  I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
  Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.

  The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
  Is this a problem with x 64?
  I've tried the recovery disks

  Can anyone help?
  Thank you

  Rob

  On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.

  Have you tried to reboot your router and check again?
  When you unlock your router you have the same problem?

• WiFi does not connect to the home network

  IM currently problems with my wifi on my new z3 compact network.

  My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

  I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

  Any help would be appreciated & ty in advance.

  Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
  Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.

• Check for Wifi but not connected

  Hello

  I try to detect the State when the wifi is enabled but not connected to a wireless network:

  if(RadioInfo.getSignalLevel(RadioInfo.WAF_WLAN)==RadioInfo.LEVEL_NO_COVERAGE){
  

  but it does not work. What is the correct way to do this?

  Check the radioinfo to be connected, but not being coverageinfo is not on the level of correct coverage.

• I need help to connect my used ipod touch. The previous owner did not mention that I needed their icloud account to set up my account icloud to the ipod touch.

  I need help to replace a previous owners icloud/apple id. So I can replace with my apple/icloud id, we use it and I was ignorant, I needed previous owners apple id replace it with mine. The previous owner just told me how to reset or to put in recovery mode, but the previous owners apple id needs to turn off find my iphone settings. If I can replace with mine. The difficulty. Help, please!

  You run into the lock of Activation

  Find my iPhone Activation Lock

  If you can't have the previous owner to do

  Turn off find my iPhone Activation Lock

  then back for a refund since yo cannot use the device. Apple isn't going to help.

  If yo cannot come back, turn the unit into the police because it is likely, lost or stolen

• Problems with getting a wireless connection for my IPOD touch 32 GB

  Bought an IPOD itouch 32 gb last night.  When I connected the ipod, it is connected to my itunes account and copied my music for me.

  It is also recognized by the name of WI - FI for my wireless account.  Unfortunately, I can't remember or find my password for my wireless connection and so I am unable to connect my wireless to the ipod and establishing the ability to connect to the internet and get my email, etc.

  What is the best course of action for me now.  Should I drop my wireless connection and it restore?  Note: I have a laptop that connects fine, but he asks me a password... it goes directly to the wireless?

  Thank you!

  Go into your router configuration utility and in most cases, you will see the password. If the password is not in clear text, you can change it to something that you will remember. If you do this, you will need to change the settings on the laptop, too.

  To enter the router configuration utility, connect a computer with an ethernet cable. Open a browser such as Firefox or IE and type the IP address of the router in the address bar. For a Linksys router, you must type: 192.168.1.1 [press on enter]. Refer to the manual of your router for more details.

  MS - MVP - Elephant Boy computers - don't panic!

• WiFi is not connecting with Windows 10

  Just bought an Inspiron 14 with 10 Windows, and I can't connect to my WiFi.  Yes I have tried many 'solutions' I found online, and none of them work.  My network is visible, the signal is strong, I have entered the correct network key and the computer begins to go through the login process (renewable circle dot).  Finally, he stops and says that the connection cannot be established.  All other devices I tried to connect to this network connects without any problems.  Is this a problem of Windows 10?  All the solutions out there?  Thank you.

  Thanks for your suggestions.  I was able to solve the problem by logging in using the router WPS button.  I tried to connect by entering the network password, which for some unknown reason, has not worked.  So if anyone has this same problem with a new device running Windows 10 I would say you are trying to connect with the router WPS button.  Also, once I have plugged automatically kept Windows my network news, and now I connect automatically on startup.  Thank you.

• Issue Z30 Z30 WiFi BlackBerrys - not connecting not so that Q10

  I recently upgraded from the Q10 to a new Z30. When using my home WiFi on my Z30 it stopped connecting. Attempted to re-enter password and it will fail to authenticate. Tried to remove and re - enter password on Q10 and worked well.

  Please note that my Z30 works very well on my wi - fi work that differs only in the enterprise WPA vs WPA2 Personal (home).

  Any suggestions? This is a recent change. Everything was fine last week but now I can't it connect. Tried two Wi - Fi networks domestic so far and both fail to connect on Z30... but Q10 is very good with the same password and settings.

  OS 10.2.1.3175 / SR 10.2.1.2941
  Z30 STA 100-5

  I think I solved this problem...

  (Short story) I had recently at a Horton and had attempted to use their Wi - Fi network that has helped turn the Wi - Fi option ' prompt when recorded "hot spot" is nearby.

  I disabled this option under Wi - Fi advanced parameters and my Z30 is now able to connect back to my saved Wi - Fi networks previously.

  Must certainly be fixed (hopefully before 10.3.1 this fall)

  Hope this has helped