WiFi network disappeared after that WPS button was pushed

Similar Questions

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• Slide show not repeated after that some buttons are used?

  Hello

  I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.

  Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.

  I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!

  Thank you

  William

  Is your link to the object or picture.  I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.

  Although he thinks through the problem only comes when you go directly to the frame and not when you play through.  Maybe action that activates the link lights when the object is revealed onstage on a previous frame.  When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.

  If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link.  Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you.  Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.

  That's what I'd do to test the theory,

  Good luck

  Brett

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• Adapter network disappeared after complete teacher XP SP3 installed on 8000 series 2002 Compac Presario.

  Hello. Need to download the new network adapter driver. Previously, work adapter disappeared after installing XP SP3 32-bit (operating system has been altered). PC model No. does not match the HP driver support announcements. CTRL + Alt + S does not provide a result. [Personal information deleted]research shows no machine from the 8000 series. PCI Extender card 2001[personal information deleted]AS #011242-001. Help will be appreciated. Thank you!.

  Wettach wrote... "What I've seen are: 8LSPE1 Compaq [personal information deleted] ." Sticker: 265197-006 CT: L5A720B6JN80CQ. Compaq P30 PCI.Ext. 55. PCI Extender card 2001 [personal information deleted] AS P52950A9VNCUMJ #011242-001 DG #011243 - 000 Rev OA. Power supply: Compaq series PDP-121 model HP - Q220PC3 CT: 558AA0AM5N & 0 H 3. .... That sums it up! »

  Maybe those are the specs of your computer?

  8000T 8LSPE1

  Frank

• Dell Inspiron 5547 turns after that start button / stop

  So I woke my laptop after sleep by opening it up, but I forgot he was sleeping so I accidentally pushed the power button. Then it turns of. After that I just couldn't turn it back on. I tried to plug in the cable, but only the indicator light is on (which indicates that he is in charge). I would remove the battery, but this model had built, so to remove it I have to open the screws - I've still guaranteed for at least 5 months - don't open the warranty?
  How can I fix it?

  Hello

  Please write to us.

  Removal of the Panel to take out the battery will not void the warranty as long as you n "t damage parts inside :).

  Remove the battery and the charger and press and hold the power button for 10 seconds then put back in place the parts and let us know if it worked.

  At the same time, you can remove the memory modules as to observe any changes.

  Await your response.

  Concerning

• Why DB read file is still active after that the session was killed?

  Hello
  
  I have a query which is only select read only (no selection for update) on a big enough table (lines 500millions). The result must return a few million rows (1-10 million), because it is not properly written.
  
  I killed all the sessions opened by the user who started the application, but after 3 hours, it is still ongoing.
  
  I don't understand. It's a read. There is no data restoration that must be set aside, there is no generation of redo (low) because of this.
  There are a few kinds made in this query.
  
  So, why after that I'm killing a query that is read-only, the process runs for a very long time?
  
  It is not the first time I'm facing this problem.
  
  Any ideas?
  
  Thank you
  Daniel

  >
  I killed all the sessions opened by the user who started the application, but after 3 hours, it is still ongoing.
  >
  Have Yes - but you used the IMMEDIATE clause to kill HER?
  >
  IMMEDIATE specify IMMEDIATE load the Oracle database to ongoing transactions, releases all session locks, recover session state full and immediately returns control to you.
  >
  If you really want the process completed rather than simply "marked" termination then use DISCONNECT SESSION with the IMMEDIATE clause

  See the "Clause of DISCONNECT SESSION" in the doc of the SQL language
  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_2013.htm
  >
  Use the DISCONNECT SESSION clause to disconnect the current session to destroy the dedicated server process (or virtual circuit if the connection was made through a shared server).
  . . .
  The IMMEDIATE environment disconnects the session and retrieves the status of entire session immediately, without waiting for open transactions to complete.
  >
  View the results of the use of DISCONNECTION

• The new downloads button disappears after that I get him out of the bar tabs/upper navigation bar. How can I get that back?

  Just as I have described.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• El Capitan will not install. Window disappears after pressing the button install.

  Hello world

  Looks for some install help. I try to install El Capitan for my Mac Mini. Here are some features:

  Mac Mini (mid-2011)

  OS X Yosemite 10.10.5

  Intel Core i5 2.5 GHz

  Question: El Capitan does not install anything after clicking on the button after choosing the drive. The window simply disappears and nothing happens.

  I have read all the threads to locate the file "install OS X El Capitan", but it leads to the same question.

  What other options can I here? I tried to create a new admin user to install the operating system, restarted my computer, re - download the file, etc..

  I ran out of options here. Help, please!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• wifi connectivity limited after that windows 8.1 update on Z580

  I'm on my phone that I type this because I don't have internet access on my ideapad (again)
  I updated my drivers Lenovo has kindly put on their download site for (downloaded via my smartphone) 8.1 Windows Update but I still have the same problem. I've scoured the web for solutions, I made cmd, uninstall the drivers in safe mode... nothing works!

  Does anyone else have this problem? Would really appreciate a solution if you have

  Thank you

  Jacob

  I fixed mine! What a relief.

  I have Lenovo G580, who has the Broadcom 802.11n network adapter.

  At the point where I had problems (do not already know) Windows has been configured to use the Microsoft driver for this device.

  Following the advice to look at older drivers, I have found a Broadcom provided on my computer and updated driver to use. Immediately, a WiFi connected, and all seems well.

  Here are the instructions:

  # Open the Device Manager (search Windows help if you don't know what it is)

  # Select "Network adapters", and open (double-click) Broadcom 802.11n network adapter

  Pilot # go to the tab and click the update driver... button

  # Select 'Browse my computer for driver software ".

  # Select 'Let Me pick from a list of drivers for devices on my computer.

  # Select the entry "Broadcom 802.11n network adapter (Broadcom)" from the list and click Next

  Well, it worked for me.

  Good luck, Matt

• XP computer on network disappeared after update

  After weeks of trying everything on these forums, my new machine windows 7 recognized suddenly on my network, my old XP computer. I could link to a network printer on my XP machine and card my documents from XP and a USB on the XP backup drive.

  I started to do a transfer of files and settings. Then, there was an update of windows. I stopped the transfer (before whatever it was transferred, either - I always decided what to include) and restarted the computer after the update

  Now I can't see the old XP machine in network I can see the drives mapped to my computer, but he lost some actions. I have reset the actions on the XP and that you can now view 7. BUT I still want to access the other stuff on the old machine (for example, the optical drive).

  What is strange, is that I can see the new machine 7 to XP, but can't see XP to 7.

  I spent hours trying to get this to work - now what... any suggestions to get it back (apart from catering to the last restore point when everything worked - because it will still need to update later).

  This seems all very weird and I have no explanation for the phenomena you describe. Here are the options I can see for you, listed in order of preference:
  (a) uninstall all antivirus programs and firewall on the Windows XP computer.
  (b) restore your computer to a restore appropriate point.
  (c) restore an image of your Windows 7 computer.
  (d) charging Windows 7.
  (e) living with the problem.
  (f) let me take a look at your machine by launching TeamViewer (www.teamviewer.com).
  Send a note to pegasusDOTfnlATgmailDOTcom if you want to learn more about the f option).

• Windows 7 doesn't have a network card after that I did a clean install of the operating system

  After doing a reinstall full Windows 7 my manufacturer's CD, I can't connect to the internet or a LAN wired or wireless, probably because the BONE is not an installed network card, in accordance with the resolution of the problems Windows. I reinstalled the operating system again and again, and I still have the same problem. What can I do next to install the network card? I am ignorant full when it comes to Windows/Apple stuff (I'm a Linux user, but I need a Windows PC to run specific working software) so thank you in advance for any help.

  Hello

  Welcome to the Microsoft community.

  It seems that the driver for the network adapter does not work on the computer. May not have been installed properly.

  Please answer these questions so that we can better help you.

  1. What is the brand and model of the computer?

  2 was the work of (internet) network adapter before the reinstallation of Windows 7?

  3. What is the status of the NIC in Device Manager?

  To check the status of the device,

  (a) press the Windows key + R , type devmgmt.msc and press enter.

  (b) to expand network adapters and verify a yellow exclamation point.

  (c) make a right click the adapter and click Properties and check the device status on the general tab.

  We have to download the drivers for the network card on the system manufacturers site and install it on this computer.

  Get back to us with the required information for we can help you.

• Connection WiFi failure: my WiFi account disappear AFTER WINDOW 8 update in March 2014.

  My notebook" ASUS S550C series" experienced WiFi problem after the recent updates of window 8 auto: "

  -Existing my WiFi adapter: "Atheros AR7015 Wireless Network Adapter".

  -WiFi is not displayed on the list of WiFi more

  - so not able to connect to internet on my laptop via WiFi

  -for my other devices (mobile phones, printer) could not connect to internet via WiFi

  Please, share and advise solutions by steps.

  My notebook" ASUS S550C series" experienced WiFi problem after the recent updates of window 8 auto: "

  -Existing my WiFi adapter: "Atheros AR7015 Wireless Network Adapter".

  -WiFi is not displayed on the list of WiFi more

  - so not able to connect to internet on my laptop via WiFi

  -for my other devices (mobile phones, printer) could not connect to internet via WiFi

  Please, share and advise solutions by steps.

  Dear teammates from MICROSOFT Technical support,

  Problem: My adapter WiFi and TP LINK router N existing (TL-WR940N) COULD NOT catch up with updates of Windows 8.

  To make my ASUS existing NOT PU detect/locate the mentioned router device.

  Solution: After harassing on the updates for TP LINK router, my WiFi is back on as usual.

  Suggestion: Windows 8 to consider this issue before the next update.

  Thanks in advance.

  Steps to follow:

  -Connection: get the cable instead of another wireless connection

  -Internet: go to website of TP LINK to the technical support page:

  www.TP-Link.com/en/support/Download/?PCID=201&Model=TL-WR940N&version=All

  -Download upgrade options:

  TL-WR940N V2 (300Mbps Wireless N Router) or

  TL-WR940N V1 (300Mbps Wireless N Router)

  -Download Asus

  -Extract the downloaded files

  -Stop ASUS

  -Connection: Disconnect the connection cable, this cable router device transfer

  S ' properly fed & plugged: Modem, router TP Link Wireless N & TP Link wireless

  adapter (plug on ASUS USB)

  -Restart ASUS

  -Check: Control Panel/option/wifi internet connection

  -Check: signal from the modem, adapter TP LINK signal (needs FLASH)

  -Check;  the WiFi connection is on

  -Internet: go to any site to begin to take advantage of internet surfing

  IT TAKES TIME AND SO BE PATIENT!

  I HOPE MY SHARING TO HELP YOU IF YOU ENCOUNTER THE SAME PROBLEM, GOOD LUCK!

  P.S. hoping that Microsoft will have this failure WiFi into serious consideration before the next updates

  to help us avoid these hassles!

  Tips: it is most efficient and convenient, I found.

  try other suggestions to update firmware on 192.168.0.1/192.168.1.1.

  but it's laborious! more than ever successfully logined to check code of firware TP LINK!

• Project disappeared after that put 10.2.3 update

  Yesterday morning, I upgraded 10.2.3 and then started working on a new project. Today I continued my work and then, when the program was lagging behind a bit, I closed and reopened. The project was empty. The event, all the imported data and selections that I had dragged my calendar were still there, but the project was completely empty.

  I tried to "Open the backup library", but although I had several backups available until days before, after opening a library later this morning (which was too empty), I got the gray selection by saying: "no available backup.

  What is going on? I lost all the hours of work? Is this a bug?

  I have a Time Machine backup, but I would restore not rather the whole system until last night just for this glitch.

  Thanks for any help provided.

  Where is the library and backup location - on this disk libraries?

  BTW, Time Machine can restore the items selected; you don't need to restore the system.

  Russ

  Edit: also, what version update you to?

• Power led red after that Satellite L755 was closed

  Hello.

  After I Shutdown Windows and the laptop is power off red power led is displayed.
  It is not blinking.

  What does that mean?

  + The message was edited: model number added to the topic.

  Don't you think that a person can say anything on your laptop without knowing the name of your unit from Toshiba?

  If I say, I need some info on my car +... you would ask: + what car? +