WIFI only works at the restart!

Similar Questions

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• 2540 HP all-in-one printer print by wifi only works after the router reset every time

  Hi, I recently bought a HP2540 all-in-one printer.

  I was unable to get the printer to work via wifi after trying lots of different things, but after rebooting the router and try again, it worked perfectly.

  However, it seems that whenever I'm away from the computer (or turn printer work) it will not print. However, as soon as I restart the router again it works perfectly. I guess it's something to do with the IP reset maybe, but would be unsure how to proceed?

  Thank you

  Bret

  Hey @BrentBWood,

  Thank you for contacting HP Support of Forums!

  I understand you're having intermittent problems of wireless communication with your HP all-in-one Deskjet 2540. I want to help you resolve this issue today!
  
  Because the problem seems to be fixed after you powercycle router it certainly seems to be a problem of ports with the router itself. This does not indicate that something is not actually with the router. It simply means that the router is doing its job too well and block the printer intermittently as a threat attempts to access your network.

  For your reference, I'll provide you with the support document HP on wireless connection problems. You already have the reset of the router so don't worry too much about those, but the other steps can help solve this problem for you:

  Printer keeps no connection Wi - Fi

  If these steps don't are still not solved the problem I recommend you talk to your router manufacturer to get them to open the appropriate printer ports.

  -Incoming (UDP) Ports:

• HP mini 210-2177nr: Wireless only works after the restart. No boot from HP

  HP wireless works only after a reboot. I turned my laptop off and then starts later and exactly the same thing happens: first try, no connectivity, restart: everything works. Weird, right?  I restart my laptop and voila: everything works as soon as I log in. Every time.

  This happened with my HP netbooks and laptops still rarely - I wonder what change can cause this sometimes or other brands for example my Toshiba.

  I tried to upgrade to the latest available wireless drivers but that didn't fix it. Someone knows why.

  When I tried Windows 10 overview, I don't have this problem - it starts every time.

  It seems to be related software.

  Thanks for the link - HP - troubleshooting your wireless network computers and Internet (Windows 7)

  What made 10 Windows to solve the problem?

• When I creat the shortcut keys, it only works after the restart.

  Hello

  I'm trying to creat shortcuts for games and software.

  So, as the guide in F1 says: I right click on the shortcut of the game > properties > then on the desired line, I type the keys I want (example: CTRL + SHIFT + M) > OK.

  Then I test on and it works very well, but unfortunately if I restart my computer (normally), he "forgets" it and when I press the keys, it's whatever it is,.

  But it is not clear (CTRL + SHIFT + M) of the line, it's still there when I check, just does not work...

  So if I want to fix it I have to purge the pipe and type it again.

  That's the problem as a whole, hope you have a sollution for me.

  Thanks in advance,

  Yarden

  Hello

  Make sure that you logged in as an administrator on your computer.

  If you use a program that also has a keyboard shortcut using the same key combination as the shortcut that you just created, then your shortcut may not work.

  You can not use the ESC, enter, Tab, space,. print screen, shift, or Backspace to create a keyboard shortcut.

  For more information, see the article mentioned below.

  Create keyboard shortcuts to open programs:

  http://Windows.Microsoft.com/en-us/Windows7/create-keyboard-shortcuts-to-open-programs

  Keyboard shortcuts:

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Apple Mail only works when I restart in "safe" mode otherwise it becomes crazy, using all the capabilities of the CPU.  Seems to be linked to the case.  Any help?

  Apple Mail only works when I restart in "safe" mode otherwise it becomes crazy, using all the CPU capacity without any correct output.  Seems to be connected with caches.  Any help?

  Generally, if your Mac works correctly in Mode safe, but not normally, then you have a third-party software that runs at the start of the origin of the problem.

  Safe mode disables most of the extensions of third-party startup and some Apple hardware, so it could be another problem for Apple, but I have never heard of your problem.

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• LabVIEW 2013 executable only works on the development machine?

  Hi all

  I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Explorer in installing labview nessary drivers and run the engine of time without problems. Now, I created a new test with Labview 2013 program and I can not get my new test .exe application to run on the target computer. Has anyone seen this kind of problem before?  Any help will be appreciated.

  Thank you

  
  

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• CSS only works on the page and not in the css doc

  So I have the following code for the shadows: h3.a {text-shadow:-50px 50px white, 1px 1px #00F}.  I put it on my css doc which is connected to my page, but it does not appear.  then I put it in the top of the page, and then it appeared.  Why it only works on the page?

  I just passed something like that for a few hours yesterday and realized that I was not saving the page external .css real after adding new styles.

• Multimedia file sharing only works if the two devices are connected using the same protocol

  So I'm frustrated!

  I spent an hour trying to get my Windows 7 computer to share my music with my XBox 360. I have two machines on my network, one connected by Ethernet to the router and the other connected by WiFi. I tried everything I could find online to get the WiFi connected machine appears in the "Music Player" on my XBox system - follow all sharing, make sure that my router has UPnP, restarted a bouquet of services, etc..
  Nothing! During this time, my machine connected to Ethernet was watching me in the face. He has appeared on the XBox without problem. I started to compare the settings on both machines and found no difference.
  Then I remembered, boredom, I had setting up WiFi sync for Windows Phone my wife. In fact, it was this session of troubleshooting that lead me to put this machine on the WiFi in the first place! Seems to set up WiFi sync, Windows Phone and the target of the machine must be, not only connected to the same network (obviously), but for some reason any the $ @$ crazy, both connected by WiFi. I just connected this computer by WiFi - not happy, a faster speed with my wired connection - and immediately fixed the problem itself.
  Then, remembering that, I moved my XBox WiFi network and - presto - my second machine appears without a problem.
  My question is... WTF! ???
  This is ridiculous - this is the same network! Why things must be connected using the same protocol?

  Hi, Edward Petersen,.

  Please contact the Microsoft community. I'll help you solve the problem with sharing music using media sharing.

  Some routers isolate the cable connections and wireless, you can check if you have the option in the configuration of the router to share media

  If the problem occurs, you can contact the router manufacturer for assistance.

  Hope this information helps. If you need help with Windows, simply reply that we will be happy

  to help you.

• The mouse only works in the active window and cannot select drop-down menus (W7)

  Hello

  I can't understand what is the cause. I can only select things in the active window with my mouse, I can't move the window, I can't click on anything whatsoever outside of it.

  ATM by writing this, I can not open another program or select the bar of tasks or do anything outside that window. (unless I use CTRL-ALT-DEL and force to select a new active window with my keyboard)

  Another thing is that everything works within the window, except one thing, menus drop down, I can bring up the menu drop-down but can not select anything on the menu.

  I reinstalled windows to do this same thing. I can't understand why windows doesn't let me choose some things outside my main window, it's that I'm sort of protected mode.

  Thanks for any help

  Hello

  -What is laptop or desktop?
  -What is the brand and model of the mouse? Is it wired or wireless mouse?
  -Have you tried plugging the mouse on another computer?
   
  Method 1: I would also say you update the drivers for the mouse on the computer and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Also, I suggest you use Microsoft Safety scanner to make sure that your computer is free from malware and check if it helps.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Method 3: I suggest you try to check with the other mice to make sure that the problem is not with the computer.
   

  If it is a laptop, I suggest you to check if a FN key function is to to do this. As you are facing the issue after reinstalling the operating system, I also suggest you check with the manufacturer of the computer, if there is this key.

   

  Hope this information helps.

• Apple tv only works on the left speaker

  Through any HDMI input audio left is the only work, regardless of the selection of entries.

  Two audio channels running on all HDMI inputs when tested with a DVD player, had the same problem with Google Chrome and referred to the shop. Everyone knows about this phenomenon?

  carpet

  It would sound as if you have confirmed that the question must be with the device and is not the cable or TV. How old is this particular Apple TV? It is still under warranty or AppleCare?

  TT2

• Access to Internet only works if the 3G network is connected?

  When I have the 3 G and WIFI are on, my internet connection works fine. My WIFI signal strength is good and connected. However, if I turn off the 3G (disable 3G) and my WIFI is still and have a good signal strength accoding to the XOOM, I don't have the internect connection.

  Can someone help me on this? Internet connection of XOOM should work on the Wi - FI mode.

  Thank you.

  makes me think that you have not actually found a wifi connection at all. are you sure that your connected to your wifi network and pulling an IP address?

• Typeset only work on the platform built on the Web site

  Hello.

  I'm going to build a Web site that is currently on my development server. http://www.thepointnet.com/NovaTec-development

  I use a Typeset font (make-family: ' Fira without ";) in the CSS and it will only appear on the site when I view it on the same Mac as I build the site on.)

  Seen on a smart phone or on another PC it's just default the without police.

  I've lived any suggestions for troubleshooting Adobes does not.

  Someone at - it indexes?

  Thank you

  Joe

  Hey Joe,

  I'm sorry that you trouble with that. The CSS on your site uses the font family name "Fira without", for example

  {.navbar-css

  color: rgba (255, 255, 255, 1);

  do-family: ' Fira without. "

  do-size: 130%;

  make-style: normal;

  Police-weight: 300;

  }

  The name provided by Typekit is "fira - without", with a hyphen. The browser is looking for a locally installed version of the police currently, rather than the files provided by Typekit.

  If you update the CSS file to use "fira - without" everywhere that you have "Fira without", policies should begin to work in all browsers and operating systems.

  (For later use, you can check the last name of Typekit in the Editor Kit by clicking on the link "Fonts in CSS using" selectors):

  ( https://helpx.adobe.com/typekit/using/css-selectors.html)

  If please give that a try and let us know if you have any other questions!  Best,

  -liz