WiFi problem with router series old netgear wnr?

Similar Questions

• WIFI problem with router WAG120N

  Hello
  I have a router linksys WAG120N upgrade 1.00.16
  and I have wifi problems that while I use wifi on my laptop or mobile then disconnected wifi (wifi on green router, but I can't connect) until I have restart the router
  Can you help me?
  Please, I beg you!

  It could be the firmware is damaged. Firstly, what you can do is set a channel fix (1, 6, 9 or 11). Customize settings wireless advanced: tag set to 50, interval threshold of Fragmentation 2306 & 2307 RTS threshold. If this does not help, make sure you reflash the firmware, reset the router and reconfigure.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• WiFi problem with iPad 4 on first generation Airport Express

  Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

  As a test, temporarily change the wireless network name and password on the AirPort Express.

  Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

  Can the iPad4 connect that way?

• Problems with the series of PC wireless driver laptop Toshiba 200

  Dear friends,

  I need your help. I have a laptop Toshiba series 200, Vista operating system, and I encounter the following problem:

  From time to time, without thread in my laptop disappear (the light goes out and the wireless adapter disappear from the list), the wireless connection is lost, and I have to restart my computer several times to recover the pilot. Sometimes even by restarting the computer does not resolve the problem and I download the driver on the Toshiba web site but then I must perform the installation of several times before I can do the job.

  I called Toshiba helpdesk and told me that it is a known problem with Toshiba and that they do not have a solution.

  Do you have any suggestions?

  Thanks in advance

  Kind regards
  Antony

  Hello Anthony

  I don't know which series of laptop Toshiba 200 you have but I use Satellite P200 almost a year now and WLAN works perfectly.
  Can you please tell me what model of laptop you have exactly?

  Sorry but I do not believe you have received this statement from Toshiba helpdesk.

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• Problem with router SPA2102 Battlefield 2?

  I have problems with my Battlefield 2 (all versions). I have the SPA2102.

  EDIT: The game freezes when I click to join a server, nothing happens.

  I can play other games online.

  When I try the demo version which im using this router, it does not work.

  But when I try with the same laptop in other places it works completely fine.

  I set up a static IP address and forwarded my ports to help

  http://www.PortForward.com/English/routers/port_forwarding/Linksys/Spa-2102/Battlefield_2.htm

  What else can I do to make it work?

  I am running Vista 32 bit.

  Thank you in advance!

  Basically the SPA2102 is not design to handle the heavy traffic. This unit is designed to route traffic for VOIP devices and not for game features.

• Problem with the series L of Satellite - black screen startup

  Hello

  These last days, I have a problem with my laptop. When I start it, nothing happens on the screen. I hear the process etc. of fans, hard drive, but there is no reaction to the screen. There is only one way to close: take out the battery and adapter.
  When I start it up after the problem, everything works fine.

  Anyone know what it is?

  Thank you

  I read about similar cases. It s really strange, but sometimes it happens
  But usually the BIOS update should contribute to

  You use the latest version of the BIOS?
  If this isn't the case, update with the correct version.

  Greeets

• Problem with a police old Adobe MultipleMaster after recent MS patches

  Since the December 2011 patch Tuesday, we have problems with an instance of the fonts Adobe MultipleMaster GraphiteMM. The instance I have installed now defalts to Arial and put it back, it goes to a new name which means that we must change the fonts in the existing documents.

  Someone at - he a clue patch that could have done this? My operating system is XP Pro 2002 sp3.

  Thank you

  I followed him there down to the security fix for XP KB2296199. Uninstalling it fixes the issue.

• XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

  my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

  Hello

   

  Thanks for asking!

   

  You can't connect to the internet.

   

  1. do you receive any error messages?

  2 what is brand and model computer?

   

  The question may be because the network drivers.

   

  To check that I suggest to visit:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• Problems with keyboard on old Satellite a series

  I have a laptop satellite (4 years). Yesterday the 'u' key began to play up and when you press the button now it always includes 'i' (IU). I restarted the computer and checked on the keys to see if there is no debris under the two keys and there is not, could someone advise me on the best course of action?

  Thank you very much!

  Why put you nothing on you laptop? What laptop do you use?

  Now you deliver: it seems a malfunction of the keyboard and it must be replaced.
  Contact the ASP in your country to get a new keyboard or if you n t know how to change this keyboard request replacement.

  Good luck

• Nook Color ereader & connectivity problems with router WRT610N

  I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

  By the recommendations of various forums of Nook, I had the best luck with the following...

  2.4 Ghz band settings

  SSID: NookNetwork

  Channel width: 20 GHZ

  Standard channel: 9

  SSID Broadcast: enabled

  Security mode: WPA2 Personal

  Encryption: AES

  Passphrase: set out

  Key renewal: 3600

  UPNP: disabled

  RTS: default

  Defragmentation: default

  Tag: default

  However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

  I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

  Mike

  Hi death,

  Thanks again for your comments and your concerns. Really appreciated!

  I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

  I'll let you know...

  Mike

• problem with router WAG54G2

  I bought this model and use it to connect 2 office units and a playstation 3 through the ether, but also a laptop via the wireless link.

  using only the ps3 works fine, using only offices very well works.

  problem using laptop computer while sharing the PS3 network for the most part,

  Using the ps3 and laptop together (ps3-ethernet) computer laptop (Wifi), some time after the laptop is lose the connection with the router, can not access the router configuration page at all and nor i see the network when scanning with computer laptop .This takes place with the help of laptop too but 2 or maybe 3 times during several hours of use. laptop is verified works fine in other networks.

  is my faulty router or simply need some sort of (firmware?) or another update? some config settings, I'm not aware of? p.s even shut down my ps3, my connection with the laptop can be re-established as able to reset my router.

  performed all the settings above, yet his work very well with the ps3 update too.ill if it doesn't work.

• Satellite M100-126, Wifi problem with Blutooth on Vista activation

  Hello

  Installation of Vista Pro on my M100, I've got blue screen e if active when blutooth Wifi operational.
  No Blutooth problem if you use the Lan and Wifi card down.
  All the drivers have been downloaded from the website of Toshiba (Blutooth drv: 5.10.06 for Vista 32 bit).
  For now, using Wi-Fi with disabled Blutooth.
  Thank you very much for all your comments... :-)

  Alain

  What is the message of the blue screen (it mentions any driver name or device)?

• Problem with the series of read/write

  Hi all

  I don't know if this belongs here or on one of the guidance material, but I thought I would start here.

  I have two devices which I am currently trying to contact via the serial ports on a PXI chassis in real time.  In both cases, I series of software that seems to work fine when I use the serial port on the controller (for example, COM1).  Now, I have two cards that I used two different systems to talk to these devices - 8430/2 and 8430/4.  In both cases, when I use these cards, it seems I have periodic in response by devices delays when you use the same code that I use when talking through the serial port of the controller (i.e., I get some downtime when trying to read code error-1073807339).  I tried to Exchange cards with spare parts, but I have the same problem.  I can handle the delays to retransmit the command, but this destroys ultimately the determinism of the system given that the delay may create a pause of up to 2 seconds.  I tried to change the size of the buffer, but I seem to have the same problem.  Does anyone have any ideas as to what could happen?

  Cheers, Matt

  Thank you, Luis.  Indeed, one of the errors being thrown was a timeout error (the other was thrown by one of the devices indicating that he did not understand the command sent).  However, the problem wasn't that I was getting a timeout, but rather that I was getting an error on one platform and not on another.  But it seems that I solved my problem - I simply set the I/O VISA Write mode to synchronous and this seemed to solve the problem I had.

  Cheers, Matt