WIFI problem with router WAG120N

Hello
I have a router linksys WAG120N upgrade 1.00.16
and I have wifi problems that while I use wifi on my laptop or mobile then disconnected wifi (wifi on green router, but I can't connect) until I have restart the router
Can you help me?
Please, I beg you!

It could be the firmware is damaged. Firstly, what you can do is set a channel fix (1, 6, 9 or 11). Customize settings wireless advanced: tag set to 50, interval threshold of Fragmentation 2306 & 2307 RTS threshold. If this does not help, make sure you reflash the firmware, reset the router and reconfigure.

Tags: Linksys Products

Similar Questions

  • Satellite Pro A10 - Wifi problem with router ZyXEL

    Hello

    I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

    Can someone please help!

    Thanks in advance,
    Fred

    Hello!

    Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

    In addition, you should check the channel of your wireless network card. It should be the same as the router.

    Good bye

  • WiFi problem with router series old netgear wnr?

    my friend has the above router. I can connect but get no data transfer. My Tablet and my friends phones HTC incredible and the droid og work very well.

    We have made general troubleshooting and installed all the updates still same problem complete a connection, but no data. I must point out that my work wifi without flaw in all the other places work home other family friends etc. Any ideas would be appreciated. Thank you

    OK I thought I finally have solved the problem in a simple way. I downloaded WifI farpoc analayer (sp?) in the app store and found a clear channel, then changed the channel auto channel default routers wifi clearer in the House (5 in this case) at the moment I am cruzzing along. Won't be 100% not satisfied until he was at least a few hours, but this is the longest, I've never been able to connect to this router.

  • WiFi problem with iPad 4 on first generation Airport Express

    Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

    As a test, temporarily change the wireless network name and password on the AirPort Express.

    Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

    Can the iPad4 connect that way?

  • WiFi problem with Aspire VN7 - 791.

    Hello

    I have a problem with my Acer Aspire VN7-791.

    I reinstalled Windows 8.1 and I have some problems with the wireless card.

    I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

    Then I tried to install the driver from the official site and with this one:

    http://www.killernetworking.com/support/driver-downloads/standard-drivers

    The system has detected the wifi card and now I can see the SSID of the network around me.

    But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

    I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

    My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

    However, I can still use the functionality of network hosted the wifi card, if this information could help.

    Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

    Thanks in advance for your help and sorry for my bad English.

    Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

    As a last resort, book your personal date and do a cover of the plant.

  • Problem with router SPA2102 Battlefield 2?

    I have problems with my Battlefield 2 (all versions). I have the SPA2102.

    EDIT: The game freezes when I click to join a server, nothing happens.

    I can play other games online.

    When I try the demo version which im using this router, it does not work.

    But when I try with the same laptop in other places it works completely fine.

    I set up a static IP address and forwarded my ports to help

    http://www.PortForward.com/English/routers/port_forwarding/Linksys/Spa-2102/Battlefield_2.htm

    What else can I do to make it work?

    I am running Vista 32 bit.

    Thank you in advance!

    Basically the SPA2102 is not design to handle the heavy traffic. This unit is designed to route traffic for VOIP devices and not for game features.

  • XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

    my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

    Hello

     

    Thanks for asking!

     

    You can't connect to the internet.

     

    1. do you receive any error messages?

    2 what is brand and model computer?

     

    The question may be because the network drivers.

     

    To check that I suggest to visit:

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

     

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

     

  • Nook Color ereader & connectivity problems with router WRT610N

    I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

    By the recommendations of various forums of Nook, I had the best luck with the following...

    2.4 Ghz band settings

    SSID: NookNetwork

    Channel width: 20 GHZ

    Standard channel: 9

    SSID Broadcast: enabled

    Security mode: WPA2 Personal

    Encryption: AES

    Passphrase: set out

    Key renewal: 3600

    UPNP: disabled

    RTS: default

    Defragmentation: default

    Tag: default

    However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

    I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

    Mike

    Hi death,

    Thanks again for your comments and your concerns. Really appreciated!

    I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

    I'll let you know...

    Mike

  • problem with router WAG54G2

    I bought this model and use it to connect 2 office units and a playstation 3 through the ether, but also a laptop via the wireless link.

    using only the ps3 works fine, using only offices very well works.

    problem using laptop computer while sharing the PS3 network for the most part,

    Using the ps3 and laptop together (ps3-ethernet) computer laptop (Wifi), some time after the laptop is lose the connection with the router, can not access the router configuration page at all and nor i see the network when scanning with computer laptop .This takes place with the help of laptop too but 2 or maybe 3 times during several hours of use. laptop is verified works fine in other networks.

    is my faulty router or simply need some sort of (firmware?) or another update? some config settings, I'm not aware of? p.s even shut down my ps3, my connection with the laptop can be re-established as able to reset my router.

    performed all the settings above, yet his work very well with the ps3 update too.ill if it doesn't work.

  • Satellite M100-126, Wifi problem with Blutooth on Vista activation

    Hello

    Installation of Vista Pro on my M100, I've got blue screen e if active when blutooth Wifi operational.
    No Blutooth problem if you use the Lan and Wifi card down.
    All the drivers have been downloaded from the website of Toshiba (Blutooth drv: 5.10.06 for Vista 32 bit).
    For now, using Wi-Fi with disabled Blutooth.
    Thank you very much for all your comments... :-)

    Alain

    What is the message of the blue screen (it mentions any driver name or device)?

  • MAC address filtering problem with router DI-624 and printer HP D110

    Just got the wireless D110 printer and cannot connect to the wireless router.

    I have a D - Link DI - 624 Air Plus Xtreme G 2 .4GHz Wireless Router.

    The error message I get from the printer, it's that "address filtering Mac can be activated on your wireless router. This can prevent your HP printer to connect to your network without wire during installation... etc. ".

    The D-Link is configured with WPA - PSK security. If I disable all the security the wireless printer is able to connect. I can't connect the printer to the wireless router with WPA - PSK or WEP same active. There is no connection with the electrician the printer and the router.

    I have connected the router Admin and have repeatedly confirmed that Mac filtering is turned off by going to Advanced Options > Filters > filters Mac > and choose disabled Mac filters. Where is this setting? Why is not able to connect printer?

    In addition, I check the logs on the router and it shows "Wireless PC connected" and "Authentication successful" with a note that has the Mac address of the corresponding hardware address mac hardware of the printer on the wireless network Test report. It seems that the router is to let printing but the printer is not able to communicate for some reason any. It even shows under status > wireless printer is connected.

    When I talked to HP, they said to contact the router company and they couldn't help. When I called D-Link, they said technical support is no longer available for the model. I am stuck, can anyone help?

    Windows XP, tried the front of the printer and USB connection and using the software.

    After a few hours on the phone with the D-Link and HP, the problem has been resolved.

    Apparently, even if that Mac filtering is disabled (set to disabled MAC filters), the Mac address had to enter the router to enable all keeping off Mac filter setting. To me he appeared in the counter intuitive to enter the Mac address, while set to disabled the Mac filter so I wasn't that before picking up the phone with HP. Further on this point, the problem is not going away right after adding the mac address, but rather after the reboot of the router, such as the addition of mac address did not effect, without a reboot of the device.

    HP has been much more useful than a D-Link on it, although it would be nice for HP to add to their instructions and Test report of wireless network to add the Mac address, just in case. I would have tried this step if it has stated that it is acceptable to add the mac address and keep the mac filters disabled.

  • Problem with router WRT120N

    OK, so I have the linksys WRT120N wireless router, and I have a lot of problems connecting to internet, when I plug in my router to the modem and so on, I only get to my connection to the local network and cannot connect to my network. But if I use my modem, I can connect to the internet. BTW, I have a cable modem and my firmware is up to date on my router.

    Hi Cleano and welcome to the forums! Please click the link below for instructions on how to configure the router.

    To configure a router with cable Internet Service

  • Problem with route on PC with split tunnel VPN

    Hi all

    I have the following situation:

    ASA 5515 X 8.6 running

    I have several inside sub interfaces:

    .10 = 192.168.10.124

    .11 = 192.168.11.124

    .12 = 192.168.12.1/24

    .13 = 192.168.13.1/24

    .14 = 192.168.14.1/24

    Now, I want to implement a VPN IPSec remote access:

    I attribute the range 192.168.99.5 to 192.168.99.50 for VPN clients.

    I have configured the tunneling split for the following networks: 192.168.10.0, 192.168.11.0 and 192.168.12.0

    They are also exempt from NAT.

    So the config looks good.

    The VPN is in place.

    However, when connecting to the VPN, none of these networks are available.

    After troubleshooting, I discovered the following:

    Received my card VPN IP address is 192.168.99.5 (as expected)

    However, when I make a copy of the itinerary, I see the following:

    Destination netmask gateway interface

    192.168.10.0 255.255.255.0 192.168.99.1 192.168.99.5

    192.168.11.0 255.255.255.0 192.168.99.1 192.168.99.5

    192.168.12.0 255.255.255.0 192.168.99.1 192.168.99.5

    The entry door to the routing of my PC table is pointing to a non-existent address, in my opinion it schould be on the same address as my adapter VPN (192.168.99.5).

    I tried this with annyconnect and the classic VPN client.

    Where I'm going wrong?

    No, this ip pointing 192.168.99.1 route is correct. It is not the cause of the problem.

  • WiFi problem with computer hp pavilion G6-2348SG

    Dear friends

    I just got a pavilion hp laptop G6-2348SG, with FreeDod OS and installed my windows and ubuntu on it, but my wifi connection does not work. The key of the keyboard also wireless dosnt work. I tried many drivers and all that but it is still not available. any idea please?

    NOTE: I have wired connection on ubuntu, but on windows I can't even connect to the wired connections.

    Concerning

    Kodjo

    Hello:

    Here is the link for the W7 driver you need:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116957-1

    You can use all the W7 x 64 drivers and software of this model related g6.

    DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311

  • WiFi problem with case

    I have an iPhone 5. And when I on my phone in case it is the wifi does not work its cannot search any wifi device but without breaking its impeccable operation until this problem of good trying to tell me

    concerning

    I don't remember hearing any case at the origin of this problem, but it seems that you have isolated it to the case yourself. This kind of case is this? I suggest at this stage that you get another case.

Maybe you are looking for

  • iMac 21.5-inch (2011) do not restart.

    After removing the memory modules and reinsert them in place, I can't go in front of the white screen with the Apple logo, the ramp bar fills to the middle way then the iMac turns off What is going on? Thank you for your help.

  • Satellite L40 - 139 - CD-ROM drive does not

    My CD drive does not appear in my computer and when I use the Device Manager I see a yellow box with an exclamation point get this message when I go to its propertiesWindows cannot load the driver for this hardware device. The driver may be corrupted

  • How to clear a spooler error? My printer stopped working because of this

    OriginalTitle: Impression DIF I get an error of queue when you try to print, and it does not recognize the same printer I used for at least one year

  • Java and Adobe/flashpalayer update kill my computer

    Hello Whenever I update Java or Adobe, my computer works fine until I switch off. When I turn it on everything, the Tower does not illuminate properly, switch the Monitor flashes power button and a screen empty. After turning power on/off several tim

  • mild fluctuations of disk space

    is there something in windows vista that causes a slight fluctuation in space? I highly doubt that it is a virus, as my norton 360 says there is no