WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

Similar Questions

• When I use my brush tool, it works very well unless I overlap the brush with another brush stroke.

  When I use my brush tool, it works very well unless I overlap the brush with another brush stroke. When this happens, it turns bright red. How can I fix this and put it on the default setting?

  Your brush is set to Hard Mix in the options bar.  Change this to normal and everything will be fine.

• Unable to connect TC after modem swap, although wifi works very well.

  Time Warner Cable send me a new modem. (Technicolor)

  It is installed, enabled, and and the wifi works through my Time Capsule (1 TB 802.11n).

  But the TC blinks yellow and is no longer available on my iMac (Yosemite 10.10.3, 3.2 GHz Intel Core i3, 4 GB 1333 MHz DDR3)

  I restarted the mac, the modem and the TC, repeatedly.

  I have not tried a reset on the TC...

  It is installed, enabled, and and the wifi works through my Time Capsule (1 TB 802.11n).

  The last piece of this... WiFi works through my TC... sorry this is not possible.

  I have not tried a reset on the TC...

  Transport CANADA must be plugged in by ethernet on the main modem. If it's a router. Then the TC must be filled.

  But regardless of how it works you can not remove the ethernet of the TC.

  Transport CANADA should also create a wireless network and the Mac must connect directly to the TC otherwise on Yosemite or the BONES later, it will be more reliable and disappear from the network.

  So reset the TC... no files are lost and re-do the installation.

• tx2100ed starts works very well for a while, the screen suddenly freezes and then the hard drive stops

  the event appears with the decrease in intervals to the extent that it is not usable either

  also: using the hardware start button makes pc work for a few seconds first, that the system shuts down again. only after about 3,4,5 times system starts [and dies as described]

  suggestions welcome

  HDD control ok

  commissioning has failed at the beginning, I decided to start from scratch

  family XP Edition installation

  -error msg

  -cannot copy the files cmincfg.xml, ipcgf, osinfo.xml, potscfg.xml, pppcfg.xml,

  xmlp_beak.xdr, even with weed instead of beak years then bdg, ecp, fcw, hlp, loc, DSS, mcc, xmlp, mcu, mpu, reg, ssd

  After reading http://forum.notebookreview.com/windows-os-software/220341-xp-installation-wont-copy-cmnicfg-xml.html decide to get in shape first

  Startup Repair couldn't fix windows in order to start from there

  When you start the XP CD again (you are looking for a format option), option appears "c:\ initialization?

  After choosing this option, pc dies immedtiately

  now using cd Recovery Manager (n ° 2 of 2; #1 did not start), I created after the purchase of the pc

  option "reformat the partition of windows from your hard drive.

  PFF

• OfficeJet 6500: I printed a PDF very well. tried to print a second, but he's stuck.

  HP officejet 6500 E710n-z had no set of problems.  I have printed faxes, copied docs, printed Web page, print pdf document. Then tried to print a second pdf doc and the printer is locked - wouldn't print the document. I checked the Windows Control Panel, printers, and devices and I've seen two docs pdf waiting to print. I could delete the other, but not the first. It will not remove. I tried to delete the print job with no luck.  What should do?

  Hello

  The steps below will help to remove the print spooler. His writings for Vista but should work on WIndows 7 as well with a few names being different.

  1. click on start, go to control panel and then go to the printers.
  2. double-click on the icon of your printer.
  3. in the new screen click on the printer from Word in the upper left corner in game a check mark with 'use printer offline '.
  4. disconnect the device from the computer.
  5. click on the printer of new word in the upper left corner and choose "cancel all the print. Expect that to happen.
  6. If it does not, restart your computer and check if the printjob is finished now. If it happens to skip step 6.
  7. If the printjob disappeared reconnect your printer and click printer again in the upper left corner and remove the check mark with 'use printer offline '.
  8. try to print.

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• My WiFi constantly falls on my Acer t B1-720. Work very well in la for the first year I had.

  Wi - fi on tablet will remain not connected, I stop to reconnect, but after 15 minutes that it disconnected, Tried forget network and enter the password once again, same problem, please help!

  Thanks I'll try that and monitor - will let you know if it works...

• Connection Wi - Fi works very well, sometimes, then get the error 12007 farm in unexpected ways.

  works fine sometimes then leaves get error 12007 ?

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if they help.

  Step 1:

  I suggest you to update your wireless network card drivers and check if that helps.

  How to manage devices in Windows XP

  Step 2:

  Follow these steps and check:

  a. Click Start, click Run, type 'cmd', go to the command prompt and type in: "ipconfig/flushdns".
  (b) and then click OK.
  c. then type ' ipconfig / renew ' and press Ok.
  d. then type "netsh int ip reset resetlog.txt" and click Ok.
  e. restart your system and check.

• I have created a script for the activation of show and print option in the text condtional. It works very well in most of the chapter, but it does not activate some chapter. Please advise for that matter

  Please see the below script

  myEventListener = app.eventListeners.add ("afterOpen", placeFilesOnDoubleClick, false) var;

  myEventListener var = app.eventListeners.add ("AfterClose (AprèsFermeture)", placeFilesOnDoubleClick1, false);

  function placeFilesOnDoubleClick()

  {

  app.conditionalTextPreferences.showConditionIndicators = ConditionIndicatorMode.SHOW_AND_PRINT_INDICATORS;

  }

  Hello

  Set this property to app relates to a new doc created from that moment.

  Set this property instead of the app activeDocument.

  app.activeDocument.conditionalTextPreferences.showConditionIndicators = ConditionIndicatorMode.SHOW_AND_PRINT_INDICATORS;
  

  Be awared that afterOpen is triggered two times: after opening a doc and after opening a window for this doc.

  However in your case he just defined same property twice, so is not serious

  Jarek

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7, Dell Docking Station, cannot get sound through speakers (portable speakers work very well)

  Dell Latittude D630
  Replicator docking station
  Creative Labs speakers - no drivers are provided
  When I play the audio, it comes through the speakers of the laptop, even when the laptop is closed and in the docking station
  Unplugged and reconnected and has held over my head like an etch-a - sketch--> nothing solved the problem

  Hello Rzman,

  Welcome to the Microsoft Answers Forum!

  As you can hear clearly through the laptop. It seems that the connection on the speakers are not appropriate. Make sure all agreements fully connected without any loose connections.

  It could be a problem with the docking station. Try to connect the speakers directly to the laptop without using the docking station and check if it works very well.

  If the problem persists, then I suggest you to check with the speakers. You can also contact the manufacturer of your docking station or with dell and check with them if this is of any help

  Please get back to us if you have any other questions.

  Thanks and greetings
  Mir - Microsoft Support                                                           
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• X 51 headset does not work after nearly three years of work very well

  I got my X 51 since August 2014 with no problems. Since a few days ago, the microphone on my headset (Vibration of genius) has stopped working. The headphones work fine.

  I tried the front of rear catch and two different helmets - even. Same headphones on different external co work very well.

  Manage Audio, micro devices has the default value. Nothing is cut according to the levels.

  Downloaded the latest drivers from Realtek, run the installer twice (which uninstalls and reinstalls) - no change.

  When I go to hardware and audio, he has his usual - manage Audio devices, where I did these things. There is also a NVidia control panel with a tab to Set Up Digital Audio, but that just seems to post a link to the Audio devices to manage. Under hardware and sound, there is also an Alienware Audio option (which I don't remember seen before), but still, nothing is cut.

  I tested the microphone on the recording of the acoustic window tab, but no green lines rise when I talk. I also tried a video game, with in-game talk (Mechwarrior Online), no luck there. I also tried the call sound test on Skype, no luck there.

  I'm not sure things:

  I have three listed under record on my acoustic window: Microphone, Line In and Stereo Mix - the other two are disabled...?

  I read something that suggested to uninstall the driver manually and reinstall, but I know not where to do. For example, according to uninstall programs, I see an Nvidia HD Audio Driver 1.3.34.3 which was installed a couple of days - very probably the same day that my microphone no longer works. There is actually a half dozen NVidia components installed so far-should I just uninstall all?

  I read a suggestion on these forums about ePSA running, so I did - and not that fast - and he said no problems.

  I tried the system restore to two days ago, has not always worked. (I'm trying to overthrow that now)

  Only options I can think are either use AlienRespawn to reset to the factory settings, and if it does not, in my view, that I still have the Alienware W7 install disc - could start all over again.

  Any other suggestions before I resort to that?

  cosmic55

  1. There were two jacks for headphones and microphone - which is analog?

  2. I plugged a microphone to the USB - a literal hand micro - and it worked!

  3 do suggest that material analog microphone is broken?

  4. maybe a USB headset work until I get fixed t?

  1 Yes
  2. right kind USB still works. Microphones and USB based headsets do not use the analog sound card hardware at all. They use the circuits of USB and USB-Audio corresponding to the device drivers.
  3. Yes.
  4. Yes. Apart from the replacement of the motherboard, it would be the solution. They make nice Helmets on USB gaming these days here.

• Program works very well in LabVIEW 32-bit but not 64-bit

  I have a very complex program that works very well with LabView 2014 32 bit on a 64 bit Windows 7 computer. I installed LabView 2014 64-bit to be able to use more RAM and now the same program pose problems at one of the Sub screws. specifically, the sub - VI has a "invoke VI' and have problems since LV is not able to find the VI to call. How is it can be found in 32-bit but not 64-bit?

  N.b.: all copies are legitimate and authorized.

  This isn't an excerpt! Please read the help on creating this particular type of the image.

  What happens when you open the VI normally? It seems that you use DAQmx. Is the 64 - but version installed.

• How to put a spot PSD file?  DCS works very well...

  I just got a spot of a person in a PSD file, when I try to place it in InDesign I get this warning.  Saved as a photoshop DCS and it works very well.

  However the domain controllers is often corrupted, as in this thread.

  

  It was probably created by somebody who has taught 10-15 years ago what worked then. They have learned in the days of QuarkXPress and DCS files. (Same world I came... a long, long time.) And they still do.

  And it is not that the PSD file does not support multichannel mode. It's that, for some reason, InDesign does not support PSD with multichannel mode.

  So, what works in InDesign, it of just add a spot channel into a grayscale file, or add a spot channel in a CMYK file and leave it as PSD. This works in InDesign.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?