Will be a Windows 7 upgrade works for me, or is there a solution for Vista

Due to a full HARD disk, I cloned it on a new larger HARD drive. Windows will now do no updates. Copy from one place to the other often hangs and needs to reset to do something else. I tried a re installation of Vista, but starting to think than to go to Windows7. An update will work which is obviously a Vista with something missing? I saw that I have Live and he began to make my address book, that he was advised that an update is available, but it also stops. Can I go to 7 or is there a solution for Vista

Mike

An upgrade installation can fail if there is already a problem with Vista.  It is better to solve the problems you are having with Vista first.  First see if you can solve the problems of update.  Visit the Windows Vista update forum

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=no

Tags: Windows

Similar Questions

  • Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing

    Hello

    Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.

    Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?

    Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.

    Please, any advice on this will be greatly appreciated.

    Alan

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    You will receive the best help here.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows XP has worked for years and then all of a sudden today I tells me that it is not authentic.

    My windows xp pro worked for years I know that it is authentic. To update my mcafee today, they tell me that it isn't and that they cannot help.
    How can I fix it?
    original title: How do you check a genine windows copy?

    Click on the following link to validate your copy of Windows: -.

    http://www.Microsoft.com/genuine/validate/ValidationResult.aspx?displaylang=en&error=8&pagename=validate

    If my comments have helped please vote too useful.

    Thank you.

  • Prefetch is just a feature for Windows programs, or work for 3rd party too?

    My understanding of Prefetch is that it monitors the use of programs and try to anticipate when they could be used and so loaded them in memory, ready to go.

    It is just a feature for Windows programs, or work for 3rd party too?

    For example, I use OpenOffice and the first time I open it, it takes several seconds to open. If I close and open the program via a session then always opens almost instantly (about two or three seconds) so it must be in RAM somewhere. Yet every day the initial aperture is slow.

    Is - not what Prefetch is supposed to address?

    Hi Mooly,

    You can read the following article and check:

    What is the prefetch folder?

    If you are concerned about the start time, you can consult the following link:

    Optimize Windows Vista for better performance

    Hope this information is useful.

  • How can I go on the upgrade by installing Windows Media Player 11 for Vista 32-bit operating system?

    I had all sorts of difficulties to install Windows Media Player 11 for Vista Version 6.0 system.  Can someone direct me as to how to install Windows Media Player 11 on my version of Vista?

    Thank you

    SWright20

    Windows Media Player is not installed correctly and must be reinstalled

    Restart your computer.

    Start > Search box, type cmd > u glance, upper-left, right click oncmd.exe > press Run As Administrator > at the flashing pronpt, type unregmp2.exe /UpdateWMPVersion > press the Enter key
    Note: to avoid strike fault and bad spacing, it is best to copy and paste the command line above instead of typing.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Windows media player 11 for vista full dysfunction on cd burn?

    the Windows media player 11 for vista 64 holiday won't let me burn a blank cd media file at 192 kilobits per second (highest quality with songs less) it starts to burn and then cancels the entire drive and ruins it, now you mind, at the lowest kilobytes / option dry it will burn the cd with songs more but at the lowest quality which means that the disc is not very good in any case please help! Joe

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • I have Windows Live mail 2011 for Vista. I can't see attachments in my email here.

    I have Windows Live mail 2011 for Vista.  I can't see attachments in my email here.  However, they are visible in my hotmail where I have to unzip them and then save in my documents or something to open.  I used to be able to see exhibits attached, right click and then save then where I wanted them to go.  I read a lot of things on it and can not get what it is.  What could have changed in the last 2 months?  Can anyone help.  Thank you

    original title: attachment visibility problem.

    Hello Justin,

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

     

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • I get the error message, the Windows Installer Service could not be found, is there a solution?

    I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

    Always, always, first specify what operating system you are using before you begin to explain the problem.

    Try this tutorial. It works for Vista and Win 7.

    http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  • Windows 7 Upgrade Guide for dv6000/dv9000 models

    Statement:

    You use this guide at your own risk. I take no responsibility for any problem.

    Things you need to know and do before the upgrade:

    1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

    2 HP will not help you if you have software problems because these models are not officially supported

    with Windows 7.

    3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

    4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

    If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

    5 users with nVidia graphics card should check the temperature of this device before upgrading.

    In this way you will know is it works fine under Windows 7 also.

    How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

    To do this use HWMonitor (free and recommended) or Aida64.

    How do you know what model you have and the specifications for it:

    1. click on the Support & drivers link. (The upper part of this page).

    2. in the search box, type your computer laptop product (p/n) number.

    Resources:

    How to locate the laptop n/p

    3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

    4. on the same page, click on Product Information -> specifications and you will find all the information on

    your little laptop.

    How to install Windows 7 and what you need to know during the upgrade:

    1 guide: How to do a clean Windows 7 install

    2. all drivers for Windows 7, you will find in the next post below.

    3. some drivers have comment while they are initially made for Vista system.

    During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

    Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

    Resources:

    Make older programs in this version of Windows

    How to run a program in Compatibility Mode in Windows 7

    CHIPSET DRIVERS

    Solution on COPROCESSOR with yellow exclamation mark () 

    If you have Intel processor:

    Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

    Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

    If you have an AMD processor:

    For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

    nVidia Chipset (Install and reboot before other drivers) here (Vista)

    For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

    nVidia Chipset (Install and reboot before other drivers) here   (Vista

    Important information for users with nVidia chipset!

    If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

    GRAPHICS DRIVERS

    Intel graphics:

    Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

    nVidia Chart: 

    Important information!

    If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

    you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

    ( process):

    How to remove drivers Windows system nVidia graphics.

    Drivers:

    nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

    OPTION 1

    267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

    OPTION 2

    Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

    Note:

    Don't forget to first uninstall previous graphics driver.

    nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

    OPTION 1

    First try installing the Vista drivers for your model.

    Resources:

    How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

    OPTION 2

    If the drivers will not work so try modded drivers worm 195.81.

    Note:

    Don't forget to first uninstall previous graphics driver.

    How to install Windows 7?

    1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

    2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

    3 install and reboot.

    OPTION 3

    Last thing you can do is install graphic driver from Windows Update.

    Note:

    Don't forget to first uninstall previous graphics driver.

    1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

    Windows Update '.

    2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

    for your computer.

    3select the " optional updates " and install from there only driver for your graphics card.

    AUDIO DRIVERS

    Conexant HD Audio

    Use the Vista drivers for your model.

    Resources:

    How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

    Realtek HD Audio

    Use the Vista drivers for your model.

    Resources:

    How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

    If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

    "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

    MODEM DRIVERS

    Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

    Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

    HP QUICK PLAY 

    HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

    Notes:

    • It must be installed before HP Quick Launch Buttons.

    • You have installed this software and it crashes when you use?

    Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

    Resources:

    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

    HP Quick Launch buttons

    Solution on KEYBOARD FILTER with yellow exclamation mark ()  

    HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

    WIRELESS DRIVERS

    Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

    Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

    Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

    HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

    Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

    Note:

    How to install the Bluetooth driver?

    Click on the link below:

    How to install the driver Bluetooth HP Windows 7.

    ETHERNET DRIVERS

    LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

    Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

    CARD READER

    Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

    Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

    TOUCHPAD DRIVER

    Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

    Note:

    Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

    How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

    ONLY IF YOUR MODEL: WEBCAM 

    CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

    Note:

    If you have a problem with your webcam, check below links to HP documents:

    Solve Webcam Windows problems

    Test a Webcam using your favorite Instant Messaging

    3VRX (optional software)

    on the screen the images and associated sounds that are displayed and heard when volume control

    3VRX here (version 2.5 for 32/64-bit Win7)

    Note:

    Here is YouTube video that shows what you can do with this software.

    ONLY IF YOUR MODEL HAS: FINGERPRINTS READER

    1. uninstall all software and previous fingerprint reader drivers

    Check below how guide (only it's non-standard uninstall process):

    How do I uninstall the driver and the AuthenTec fingerprint software

    2 you can install now correct fingeprint reader driver and software.

    There are two apps that are available on this device:

    - AuthenTec TrueSuite

    and

    -DigitalPersona Personal (recommended).

    Information on how to install the software you will find below guides:

    AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

    DigitalPersona Personal fingerprint AuthenTec and Windows 7

    ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

    How can you check is your DVD with Lightscribe drive?

    The Panel of DVD, there will be a Lightscribe logo.

    LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

    Report of the changes that have been made in the guide

    Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

    Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

    Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

    Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

    Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

    Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

    Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

    Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

    Windows 7.

    Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

    Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

    worm 9.6.0.1014

    Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

    worm 197.16

    Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

    Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

    Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

    Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

    15.0.13.3 worm

    Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

    Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

    Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

    Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

    Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

    Scrolling in Synaptics TouchPad software.

    Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

    Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

    Driver HP Bluetooth Windows 7

  • Windows 7 Upgrade Guide for dv2000 models

    Statement:

    You use this guide at your own risk. I take no responsibility for any problem.

    Things you need to know and do before the upgrade:

    1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

    2 HP will not help you if you have software problems because these models do not have their support

    with Windows 7 system.

    3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

    4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

    If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

    5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

    Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

    on this issue.

    How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

    To do this use HWMonitor (free and recommended) or Aida64.

    CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

    Updates.

    Resources:

    How to install Windows updates

    6 If your model has nVidia graphics card then please check how high temperature this device possesses under

    Vista. In this way you will know is it works fine under Windows 7 also.

    CHIPSET DRIVERS

    Solution on COPROCESSOR with yellow exclamation mark () 

    If you have Intel processor:

    Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

    Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

    If you have an AMD processor:

    nVidia Chipset (Install and reboot before other drivers) here (Vista)

    Important information for users with nVidia chipset!

    If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

    GRAPHICS DRIVERS

    Intel graphics:

    Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

    nVidia Chart: 

    Important information!

    If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

    first of all to remove old drivers from your system. Check below how guide do (that's not standard

    ( uninstall process) :

    How to remove drivers Windows system nVidia graphics.

    Drivers:

    nVidia GeForce 8400 M GS:

    OPTION 1

    267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

    OPTION 2

    Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

    Note:

    Don't forget to first uninstall previous graphics driver.

    nVidia GeForce GO 6150 7150 M, 7200 M:

    OPTION 1

    First try installing the Vista drivers for your model.

    Resources:

    How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

    OPTION 2

    If the drivers will not work so try modded drivers worm 195.81.

    Note:

    Don't forget to first uninstall previous graphics driver.

    How to install Windows 7?

    1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

    2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

    3 install and reboot.

    OPTION 3

    Last thing you can do is install graphic driver from Windows Update.

    Note:

    Don't forget to first uninstall previous graphics driver.

    1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

    Windows Update '.

    2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

    for your computer.

    3select the " optional updates " and install from there only driver for your graphics card.

    AUDIO DRIVERS

    Conexant HD Audio

    Use the Vista drivers for your model.

    Resources:

    How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

    MODEM DRIVERS

    Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

    HP QUICK PLAY 

    HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

    Notes:

    • It must be installed before HP Quick Launch Buttons.
    • You have installed this software and it crashes when you use?

    Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

    Resources:

    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

    HP Quick Launch buttons

    Solution on KEYBOARD FILTER with yellow exclamation mark ()  

    HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

    WIRELESS DRIVERS

    Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

    Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

    Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

    HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

    Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

    Note:

    How to install the Bluetooth driver?

    Click on the link below:

    How to install the driver Bluetooth HP Windows 7.

    ETHERNET DRIVERS

    Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

    Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

    CARD READER

    Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

    Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

    TOUCHPAD DRIVER

    Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

    Note:

    Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

    How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

    Alps TouchPad

    Install driver through Windows Update:

    1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

    Windows Update '.

    2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

    for your computer.

    3select the " optional updates " and install from there only driver for Alps TouchPad.

    ONLY IF YOUR MODEL: WEBCAM 

    CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

    Note:

    If you have a problem with your webcam, check below links to HP documents:

    Solve Webcam Windows problems

    Test a Webcam using your favorite Instant Messaging

    3VRX (optional software)

    on the screen the images and associated sounds that are displayed and heard when volume control

    3VRX here (version 2.5 for 32/64-bit Win7)

    Note:

    Here is YouTube video that shows what you can do with this software.

    ONLY IF YOUR MODEL HAS: FINGERPRINTS READER

    1. uninstall all software and previous fingerprint reader drivers

    Check below how guide (only it's non-standard uninstall process):

    How do I uninstall the driver and the AuthenTec fingerprint software

    2 you can install now correct fingeprint reader driver and software.

    There are two apps that are available on this device:

    - AuthenTec TrueSuite

    and

    -DigitalPersona Personal (recommended).

    Information on how to install the software you will find below guides:

    AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

    DigitalPersona Personal fingerprint AuthenTec and Windows 7

    ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

    How can you check is your DVD with Lightscribe drive?

    The Panel of DVD, there will be a Lightscribe logo.

    LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

    Report of the changes that have been made in the guide

    Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

    Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

    Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

    Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

    Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

    Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

    Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

    Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

    Windows 7.

    Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

    Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

    worm 9.6.0.1014

    Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

    Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

    Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

    Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

    Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

    15.0.13.3 worm

    Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

    Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

    Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

    Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

    Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

    Scrolling in Synaptics TouchPad software.

    Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

    Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

    Driver HP Bluetooth Windows 7

  • I will reciece a WINDOWS 7 upgrade disk will modernize my system current system Windows Vista Home on my HP COMPAQ COMPUTER that I bought at OFFICEMAX store.

    My WINDOWS 7 upgrade disk that I will receive will contain a complete WINDOWS 7 SYSTEM, just in case I have to completely rebuild my system from scratch in the future?

    ·                                 This is the Forum for Windows Update .

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    "Download Windows 7 installed and activated on your PC."

    They will help you in the Windows 7 Forum at the above address.

    For any other issue of Windows 7, here is a link to a list of the Windows 7 Forums:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

    See you soon. Mick Murphy - Microsoft partner

  • Windows 8 upgrade - support for Toshiba laptops models

    Hi community

    If you want to know if your mobile phone is supported by Toshiba win 8 update, please visit this page:

    + The table below lists all Toshiba models by short numbers that are currently supported for the Windows 8 upgrade program. +

    http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-matrix

    _ * Incidentally: * _

    If you are looking for specific * Windows 8 drivers * for your Toshiba laptop, visit the drivers of Windows 8 for the upgrade wizard page:

    http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp?service=EU

    Welcome them
    Tom

  • Windows XP Fax Wizard no longer works on my laptop is there a solution for this?

    He worked for years and all of a sudden a couple of weeks, that the wizard lock just after that I have to select it and click Next.

    Hi scissell,

    1. do you have security software installed on the computer?

    Method 1

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click on Start , then run.

    (b) type msconfig , and then click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    (d) when you are prompted, click restart to restart the computer.

    Method 2

    If the previous step fails then I suggest that scan you SFC on the computer that would be a corrupt system file search.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • Windows Update will not install - Windows could not search for new updates to Code 8007051 A

    original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

    Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

    ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

    "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

    Some research has indicated that it was due to a problem of update?

    Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

    The "get help" link was as useless as an ashtray on a motorbike.

    Any help would be greatly appreciated

    Hi Discopossum,

     

    How long have you encountered this problem?

    Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

    Method 3:  Clean boot the computer and then try to install ITunes

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

    Method 4:  Run the fixit available in the article below to reset the Windows Update components

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

    If problems with iTunes didn't exist yet, contact the Apple Support
    http://www.Apple.com/support/iTunes/

  • The contract of affreightment for my VISTA Home Premium 32 bit [oem] will work for VISTA Ultimate OEM Dell disk shape.

    Mine has the Express Vista Upgrade Help Express upgrade DVD from Dell for Vista Home Premium 32 bit in March 2007. [XP to Vista was a promotion at the time]. I did a clean install of vista Home Premium 32-bit using the DVD upgrade at that time here.

    Now, I got Dell VISTA 64-bit DVD to reinstall [Dell Rep told me that she did not have the Vista Home Premium 64-bit and is - this okay for me to receive the DVD of reinstalling Vista Ultimate 64 bit-for which I accepted]

    Resettlement 64bits Ultimate DVD arrived today, in an envelope. I can't find a certificate of authenticity [COA] inside. However the sleeve that wrote this about the following:

    "The Microsoft certificate of authenticity [COA] operating system is a multicolored label located on the side or the bottom of your computer. The certificate of Authenticity contains the product key code, which may be needed to complete the installation of the operating system. »

    Now where's position? Can I go ahead with my clean install of Vista Ultimate 64 bit with the disc I received after formatting my drive where my Vista Home Premium 32-bit far is present.

    I am owner of a single computer in the home environment.

    Snow

    As Dell-Jesse has already been said, "COA at the back of the system is ONLY for Vista 32 and 64 bits and NOT Vista Ultimate or business House. Computers Dell will not have a certificate of authenticity if you use the Dell supplied DVD on a Dell computer. The bios detects that it is a Dell disk and a Dell system and is not a certificate of authenticity'.» Good luck with the new OS!

Maybe you are looking for

  • Step by step 10.6.8 to El Capitan, most hardware implemented at level?

    Have a mid-2010 7.1 Macbook 13 "- want to upgrade RAM from 2 GB to 8 GB (I read that it is possible although it is above the official max)." Also want to swap the 250 GB HARD drive for an SSD 500 GB and upgrading to Snow Leopard to El Capitan. Steps

  • Get references from articles inside an XControl

    I would like to build a property for an XControl in order to get the references to the controls in the front panel, something like ownership of the cluster "control []". I tried to get the references of the façade and pass them to the main VI through

  • BlackBerry smartphone how to upgrade OS 6 BlackBerry pearl.

    I can't update my bb Pearl with OS 6, mine is currently on OS 5, but BlackBerry desktop software says no update. \ * edit * I use this, got my network http://us.blackberry.com/support/downloads/download_sites.jsp but, it does not work even after I do

  • BlackBerry Smartphones SMS Messages: What is follow-up?

    Hello I'm on a family plan talk with AT & T.  I was wondering if the content of SMS messages are tracked or stored anywhere. It appears on the invoice?  Can he ask to appear on the invoice?  It appears on an online account? Is there a software that c

  • computer starts alleen op in safe mode.

    0pstarten in normal mode, cmp. Start alleen op in modus niet works F8 safe