Will be device drivers (printers, USB Hubs, router, wireless, etc.. wired routers) who currently works for Windows 2 K and XP (SP3) on Windows 7 Home Premium 64 bit?

Old devices connect to computers with Windows 7 home premium 64-bit.

Hi Eventers,

Thank you for visiting Microsoft Answers.

Access the link mentioned to check if your hardware is compatible with Windows7 below:

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

Visit this link to download the Windows Upgrade Advisor:

http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Microsoft will release a disc of a security update for Windows Vista Home Premium 32-bit?

    A lot of my family security updates for Windows Vista Edition Premium did not install correctly.  WillI have the opportunity to purchase these updates from Microsoft?

    I am a senior with limited funds.

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • It's going to be an update for Windows Vista (home premium 32 bit is what I'm running) which will trigger the max score until Windows 7 is going to?

    I have these sides:

    CPU - 4.7

    RAM - 4.8

    Graphics - 5.9

    G. graphics - 5.9

    Disk hard - 5.7

    What I want is to be able to tell how my graphics card is really because it's maxed out at 5.9. I know that if I was running 7 it would be 6. _ or maybe even 7. _.  So is there an update I can download for vista which will allow my ratings reach the coast on windows 7?

    Not - or at least not likely (but the drivers, firmware or software updates regular for the device using Vista may helo).  The ratings are based on this device using the disks appropriate for your version of Vista device and it.  How it works in Windows 7 (if it works in Windows 7) is from THESE drivers and the operating system (and other components on this computer).  Even if you can and did move to Windows 7, there is no guarantee that you would get all the numbers even better less significantly better numbers - although it is certainly possible amd I know that it has been the case for others who have updated.

    The best place to check the updates of device driveer (or firmware or software related, if applicable) is either the manufacturer of the computer if it came with the computer or the manufacturer of the device.  Their websites should have the links and downloads and they will be the most recent and the best available (better that what you could get through Microsoft - in fact, I suggest strongly you never use the drivers supplied by Microsoft and always bring manufacturers directly. What is the most recent will be available to give you the best possible results (before the upgrade of the unit such as adding more RAM tp the video card if your system and it can accept more RAM).

    You cannot use Windows 7 device on a Vista machine drivers.  Not only which won't work (if it allows even the facility) and will not improve ratings but that could seriously damage your system or device.  Please take my word on it and don't even consider that it.

    Just check out the manufacturers for updates of device (drivers, firmware and/or software) and keep your system up-to-date with the latest available, and that's the best you can do.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Belkin F6D4050 v2 USB Wireless Adapter turns off after 5 minutes using Windows 7 Home Premium 64 bit

    I recently bought a wireless adapter Belkin for use in my Media Center PC in the living room. The router I use is also a Belkin N + Router. The wireless adapter will connect to my WPA encrypted network, but it will stop working after about 5 minutes or more. The State of the connection is going to say "No network detected." The icon shows a strong signal with a yellow bang next to it. It takes a hard reboot to get it working again. Take out the USB port and put again does nothing. The icon remains the same, but he won't let me not make a right-click or left-click on the icon. When you try to stop, the computer turns off completely; It gets stuck on the "Shutting Down" screen.

    I disabled the option in the settings to get to power adapter down to save power. I thought that this would fix it, but still the adapter is not connected.  My Dell laptop gets a signal stronger than this card, and there is also no problem to stay connected to the router.

    Any help would be appreciated on figure out how to get the card working properly.

    Hi brutus09,

    Welcome to the Microsoft Answers site!

    That the connection is lost intermittently, the issue seems to be with the drivers.

    As for now I suggest to uninstall the drivers for the wireless adapter and download the updated drivers from the manufacturers website and see if it can solve your problem.

    Access the link below to download the driver for the Belkin Wireless card.

    http://en-us-support.Belkin.com/

    1. go to the control panel and, under "Programs", select "uninstall a program".

    2. Select, then uninstall "Belkin Wireless card driver" from the list.

    3. disconnect the adapter.

    4. using another PC or via an temporary Ethernet, download the latest driver from the link above.

    5. run the executable downloaded on the computer, connect the adapter when prompted target.

    6. connect to your wireless as usual. If you have an encryption key, you will need to enter again by reinstalling the driver should solve the problem

    Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    Let us know if it works very well, or for any further assistance.

    Concerning
    Varun j: MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

    I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

    Here's the driver page.

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

    There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

    The Base system is the JMicron card reader.

    Ethernet is Realtek gigabit

    USB is Intel USB 3.0

    1 unknown is 3D Driveguard

    2 stranger's validity

  • driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

    I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

    Someone please help

    PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
    PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
    PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
    PCI\VEN_10EC & DEV_5288 & CC_FF0000
    PCI\VEN_10EC & DEV_5288 & CC_FF00

    Hello

    Try the following:

    http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

    http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

    Kind regards

    DP - K

  • Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

    I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

    After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

    HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

    You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

  • After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

    I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

    Original title: operating system 32 and 64 bit

    Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

    Find the website of your computer manufacturer support.
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

    http://support.Microsoft.com/kb/827218

    BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

    Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • No audio output device is installed (windows vista Home premium 32 - bit os servicepack) 2

    I have acer aspire 5520 windows vista Home premium 32-bit. That's almost 3 years when my father bought it.i portable listening using WMP, then all of a sudden my listening has been interrupted, idon't know why my sound card did not repond I put the mouse over the speaker icon in the taskbar and then the pop-up message displays "no audio output device is installed" then I tried to reinstall using the plug-in in windows mobility then after installing I rebooted my laptop then not sounds I heard windows logo.and start after logging in the Chamber retains an x icon and the message is always ""no audio output device is installed"... I tried to restore my system, but still it does not work and I tried to download the live update and I installed it but no sounds are coming and the same message appears but sometimes it '. works when I'm trying to reinstall my audio driver but after a reboot, the problem will exist

    Please help me solve this problem. show me some of your solution to solve this problem or send to my email add: * e-mail address is removed from the privacy *.

    Thank you
    zerofrancis

    http://en.kioskea.NET/forum/affich-28859-no-audio-output-device-installed

    http://forums.techguy.org/hardware/569059-no-audio-output-device-installed.html

  • Installation of Windows Mobile Device Center in Windows 7 Home Premium 64-bit

    I had been Active Sync with my Palm Treo.  I bought a new computer with Windows 7 Home Premium 64-bit. So I downloaded and tried to install drvupdate - amd64.exe, the 64-bit version of Windows Mobile Device Center for my AMD Athlon II X 2 2.7 GHz e-machine.  By running the installation program, it seems to make progress and then in the Middle, it seems reverse-the remaining time runs backward, and the installation Bar starts going right to left rather then from left to right.  I get no explanation, no code error and no results.  Windows Mobile Device Center is not in my list of installed programs.  I don't think to close my anti-virus programs.  How can I install Windows Mobile Device Center 64?

    Thank you.  Before I had this message, I got the WMDC installed by stopping antivirus, Carbonite and uninsralling law service programs!  I am not sure that I had to do the latter, but I thought that the law! Outlook may have hurt service.  However, I will use the set of instructions that you gave me for a problem with separate installation that I am now known (Office 2003 SP3).

  • How to upgrade the graphics card drivers sony vaio laptop computer vpceb45fg Windows 7 home premium 64-bit?

    How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?

    Hi simran1976,

    Use the link below to download and install the video drivers:

    http://www.Sony.co.in/support/product/VPCEB45FG#

    http://www.Sony.co.in/support/product/VPCEB45FG#

    If my post answered your question, please mark it as an "accepted Solution".

  • My Windows 7 Home Premium 64 - bit will make not a disk defragment!

    My Windows 7 Home Premium 64 - bit will make not a disk defragment! Can anyone help?

    "Disk Defragmenter is currently using custom settings created by another program."
    RE - issue of Tom Ferguson - "computer maintenance program."
    Including Norton or any of the other AV that has 'optimize' tools
    It's may be in conflict with the Windows Defragmenter?

    "The drive has 318 439 Go free."
    My understanding is Win7 Defragmenter needs 15% free space and you
    are a bit lower than that.
    Normally, you would get a message saying that you have enough free space, but
    who cannot occur due to the other error message.

    "Or is the only alternative-3 rd party software?
    You can try AusLogics Disk Defrag, but still 15% needs to free up space.

    «Is it possible to uninstall and reinstall MS disk defrag»
    You cannot uninstall or reinstall defrag Ms.
    ... Just a guess. If it were somehow corrupted you might replace the .msi file
    with a new copy,

    .

  • Device Version Manager: 6.1.7600.16385 presenting no matter what devices or Windows 7 Home Premium 64 Bit drivers? This has already been answered? If you don't see it you can check or update all drivers.

    14/07/13

    Whenever the device driver is selected there is just a blank page that appears. There are no announcements of any drivers anywhere, or visible by any way within Windows 7 Home Premium. For this reason there is no way to check on all the drivers or the parts of the system to see if there is no system conflicts.  I have a driver repair program that when search enabled for and comes with a list of drivers on the computer and indicates the factors that bear on a date and will go through the steps to change but since I have no way to see the driver manager or it's poster so I can't say if something is changed.

    If I have something again plug it into a USB Port, the computer recognizes that something has been plugged, but that it will not open the directory automatically, as it used to do.  For example if I put in a CD or a DVD that has auto start it won't, so it's just sitting there. If I use Windows Explorer and click computer directory will show a device for example: DVD has a DVD named such and so in the drawer.

    Plug-and-Play is selected and activated, but it seems that it does not work.  If I plug a USB key into the USB (any USB port) it sometimes it indicates with a beep or a pop-up window indicating something was plugged or removed as the case may be.

    If this file has been deleted, if it is to cause such a thing?  This computer (gateway) has a grounded partition which has a restore works however it resets all default settings etc. or can erase all files.  If there is a way to download the missing files, which makes Driver Manager do its thing, it would be a good thing. Any suggestions?

    22/07/2013

    Thank you for your suggestions. They were a good start, I followed everything as suggested, but nothing helped.

    1. as to the question was just a new program installed before this problem?  The answer could be Yes. But unknown to you, because I can't be sure of the effective date of what's going on.

    I tried to go back, at an earlier date, but it did not help.

    2. for Plug and Play - he already is set to Auto and is active, but it is grayed out and I can't change it. So it turns out that I'm locked somehow. Even if I am put as an administrator.

    3. I went into the registry and everything what you suggested is already there.

    4. the problem still exists.

    Always looking for HELP

    DwBent

    Hi DwBent,

    I would be grateful if you could answer the following question:

    Were there any software or hardware changes made on the computer before this problem?

    This can cause if the Plug and Play service is disabled (disabled people); I suggest you follow the troubleshooting steps and check if it helps;

    Method 1:

    To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:

    (a) click Start, click run, type services.msc, and then click OK.

    (b) double click on Plug-and-Play. If you receive a Configuration Manager message, click OK.

    (c) in the Startup Type list, click Automatic, and then click OK.

    (d) Community Services.

    (e) restart the computer.

    Method 2: The other reason, Device Manager may be empty is because there are some security issues with the registry key.

    Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Back up the registry

    http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

    (a) go to "Start", click "run", type "regedt32" and press enter.

    (b) expand the "HKEY_LOCAL_MACHINE" window

    (c) scroll down to "SYSTEM\CurrentControlSet\Enum".

    (d) with 'Enum' selected, click on "security", "Permissions" menu

    Note: At this point, you'll probably notice that there are no permissions on this key.

    (e) click on 'Add'.

    (f) add the group "everyone" and the "SYSTEM" user.

    (g) select "everyone" and check the "read" ONLY!

    (h) select 'SYSTEM' and check the 'total control'.

    (i) click on the button "Advanced" at the bottom of the window.

    (j) on the control of the Advanced window "Reset permissions on all child objects... »

    (k) click on 'OK'.

    (l) in the warning window click "Yes."

    (m) to close the registry editor and check with the question.

    If you need help with Windows, please do not hesitate to post. We will be happy to help you.

  • Windows 7 Home Premium 32-bit on a Dell Studio 140g running a NETGEAR WG111v2 54Mbps Wireless USB 2.0 adapt and loses the connection permanently

    I have a problem with this program-it very often loses the connection, so with any live video as a conference, he fall causing problems with, naturally, the frustration on both sides. The router is in another room may be just 25 feet away maximum which the signal passes through 1 wall and offered "free of charge to AT & T TV and Internet clients" so a technician said as saying "it's just a basic router", but the signal goes further to a TV, another 20-foot more away and had no problem connecting unless it is with the AT & T network itself. Even if he reconnects automatically most of the time, but sometimes I have to manually reconnect which can take of time also a lot of time. I had another SATA driver and separate, which was working fine then one day abruptly stopped and now that the driver to reconnect and I was forced to use the old and original driver and I'm back with the same problems. I can't find where it is that I found this other, independent driver, even with a search, and now I have no idea how to solve. I tried all suggestions with Microsoft Fix It without modification done or as it says "no changes have been made, your driver is up to date" and I have tried these suggestions and now I'm here. I also went to CNET to search for a driver, but not luck to everything I've read about the drivers there. Finally, I intend to go with another program called Easy Wifi Radar and I don't know what would be better to use Wifi adapter and since I have a few target (store) [s http://www.target.com/s?searchTerm=wifi+adapter & category = 9975894% 7CAll % 7Cmatchallpartial % 7Celectronics & lnk = snav_sbox_wifi + adapters] I guess I'll take the adapter on their part and their site search , I see a lot to choose gift cards, but who would work better with my system and this program of "Easy_WIFI_Radar"? Any suggestions? Maybe a better deal with another source of in-store/online Wifi adapter?

    Hi David,

    Thanks for posting on Microsoft Community.

    I understand that you have connected the external NETGEAR WG111v2 USB adapter to work with wireless internet and the connection is intermittent.

    Maybe it's because the wireless USB card driver and it is perhaps because of the hardware (USB wireless card) itself.

    Try the suggestions below and see if it helps.

    Method 1:

    You can try to download the latest Firmware utility from Netgear support site and check if it helps.

    Check out the link below to download the latest firmware for NETGEAR WG111v2.

    http://Downloadcenter.NETGEAR.com/en/product/wg111v2#searchresults

    Method 2:

    Dell Studio Hybrid D140G may come with the card wireless in the generation in it, you can try to disconnect the external USB NETGEAR WG111v2 adapter and try to connect to the network card wireless wireless generation.

    To connect to the wireless network, please visit the link below.

    http://Windows.Microsoft.com/en-in/Windows/view-connect-available-wireless-networks#1TC=Windows-7

    Method 3:

    Try disabling your antivirus software that may block the incoming connection wireless.

    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information helps, please reply with the status of the issue for further assistance.

  • Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

    I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

    I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

    Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

    Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
    Next?

    THX.
    AGE

    Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.

Maybe you are looking for

  • Satellite A350 - lines on the screen

    Hi all About 6 months ago I bought a Satellite A350. Had no probs at all until there is about 2 weeks where a really faint horizontal line would appear running on the screen, about halfway to the top. Then a few days ago the bottom all the half of th

  • How to integrate the 2 buttons

    Hello I tried to integrate the two buttons. I mean: when I switch on the first button, it will disappear and the second convocation, when I turn on the second button - first appears while the second is hidden. Help, please Kind regards Mike

  • Adjust and save

    Hello I recently took the photo of my grandchildren to their school Sports, which I just downloaded on my computer. Windows 8. However, some of the photo are some distance away, so - 1) I want to do a Zoom of the photo as much/more close view, then -

  • HP Envt x 2 13-j002dx: sound pitch high desire x 2

    Since the day yesterit that my laptop made a very electronic, sharp sound, it comes from the box on the bottom, about connectors for the keyboard. Initially, it was only when the charger is plugged in, and when I would unplug it stopped. But now it h

  • I get an error number when sending e-mail.

    I get the following error when sending an email. My ISP is century link. It seems that what is happening when I have attached a picture. Your server suddenly put an end to the connection. The possible causes for this include server problems, network