will be ipod nano pair with bluetooth 3.0

Similar Questions

• Pairing with bluetooth device

  I have a MacMini 2012 and my bluetooth is on. I just bought an external speaker, Sharper Image and it is supposed to be found by bluetooth from my computer, but it is not.  I followed the instructions that came with the external speaker and have re-product the steps to pair with Bluetooth several times and still my Bluetooth is not find the speaker.  What is the problem please?

  OS X El Capitan: Configure Bluetooth audio devices

  The speakers work with another device?

  If the speakers are connected to another device is the device not included? Speakers can connect to this device and not the Mini

• BlackBerry Curve 8310 Smartphone will remain not functionally paired with Motorola H500

  I managed (at the beginning) paired my H500 with my curve.  After a few days, the State might be involved and there is no audio routed to the headset.  I wiped my phone and restored.  Problem solved for a few days, but now I'm back in the same boat.

  I tried to remove and re-"coupling" - doesn't help - it's worse.

  Symptoms:

  Curve to find and match H500.  However, it gets stuck and says "waitng for Motorola H500" no matter how long you wait.

  It you give up in the screen "waiting...". ', devices appear to be matched, but there is no audio data.

  The choice of the "Disconnect" menu is initially present in the menu device paired on the curve.  After you select "Disconnect", the choice of the menu 'Connect' never appears in the menu device paired on the curve, so you cannot start the connection from the curve.

  Any attempt to connect/disconnect via the H500 (after mating) fail.

  Hope someone can help me.

  NiseyJ3738 wrote:

  Never, I selected (intentionally) "Don't ask this question again".  I do not think I did accidentally either.

  Yes, bluetooth is turned on. I have also turned off and turned on again to see if that would call to zero anything.

  If I click on Setup > Bluetooth > BB button > add device, the BB will search and find my earpiece. Then I click on the H500 and he asks the passkey, i.e. when 'stuck' in mode "waiting for the Motorola H500".  The H500, estimated at this stage, it is paired with the BB and if you press the button "Cancel" and out of the "waiting...". "window, the BB believes while he is paired with the headset, BUT without audio...

  Ok. Thanks for the replies. I assume you have the H500 mode thus matching and you enter the password on the BB and it is when you're stuck?  I know that you have tried to remove and reinsert the routine.  At this point, I wonder if your listener getting really into pairing mode so stuck.  He does not receive the authentication key.  Warranty?  Try pairing with another BB?  Just try to eliminate the variable as much as possible.

• iPod nano 5 with MacOS Sierra

  I use the latest version of MacOS Sierra (10.12) in my MBPmid14. However, I found that the iPod Nano 5 I have is not recognized by the computer. It loads, but it does not sync. One of you have the same problem?

  I have not used this iPod in some time, including synchronization and load. I have an XtremeMac charging cable.

  Is what the iPod is too old and too recent software, cable has problems (it has synchronized before) or something in the settings prevents the synchronization?

  I use a 5th generation iPod nano, and it works fine with the latest version of the OS and iTunes.

  When you connect it, look at the screen of the iPod.  He said initially 'Connected' (to indicate a data connection)?  Or does only show the symbol of battery?

• AT200 pairing with Bluetooth mouse

  I just bought a Tablet AT200, my first Android device, which I've updated to ICS (Android v 4.02)

  I'm trying to pair a bluetooth with the Tablet mouse. As many devices bluetooth, the mouse requires no password, but when I try to be coupled with Android insists that I get an access code, up to what I'm doing 'OK' is grayed out.

  Ive tried 0000, 1234, and many others, but nothing works, because the mouse insists on no. password.

  In Windows, it's easy because the windows bluetooth interface has an option "Access code no.", but is not present in Android

  Anyone has any ideas of a round work?

  Hello

  Found some details about supported on an AT200 BT profile:

  + Bluetooth HSP / HFP profile is not supported on the AT200 +.
  http://APS2.toshiba-tro.de/KB0/TSB23039R0000R01.htm

  I'm not quite sure what do use mouse BT BT profile but Bluetooth HSP (handset profile) and HFP (hands free profile) profile is not supported on the AT200 m

  This is perhaps the reason for your question

• Bad his pairing with bluetooth aptx.

  Me and my wife has a problem of matching to external headspeakers with bluetooth aptx. The sound is very very bad (you don't hear even what music it is) and high. We're trying to connect to a speaker without aptx and this isn't a problem. Does anyone have a solution to our problem?

  http://www.supportforum.Philips.com/en/showthread.php?15861-Bluetooth-static-with-a-litte-sound-Behi...

• New portable E460 unable to pair with Bluetooth Microsoft Arc Mouse 4.0

  My top model tour is E460 / Type: 20ETA00XSG

  Hi all

  I've seen a lot of messages with instructions what to do when the bluetooth is not working. I tried everything then maybe someone will offer you something that I have not found.

  I have tried to uninstall the default drivers, reboot for him automatically by default install generic drivers, didn't work.

  I went on the Intel site to install the latest driver for Win 7 64 bit, does not work either.

  I tried to uninstall, reboot, then install the drivers listed for my lap top on the Lenovo driver download page. Does not work too.

  The arc blue tooth mouse appears when I try to add a bluetooth device. However, after the installation of auto-pilot which takes place after that I tried to add the mouse, it seems to be no connectivity between my mouse and my lap top.

  Please help me. Thank you.

  I installed the 'Optional' items in the recommendation to upgrade Lenovo system and now the mouse works. Have no idea why Lenovo listed these items as "Optional", when in fact he was so crucial to solve this problem of bluetooth. Thank you.

• IPod nano wheel won't work

  I tried to bend the PIN as shown in a previous answer... .and even jiggling, but still nothing... the only way I have to continue to use this Ipod Nano is with the remote control of the mooring/player device.

  What model of iPod nano is that?  If she has a 'wheel', it must be the 5th generation or earlier.  I assumed that you have checked the Hold switch, to make sure that it is in the OFF position.

• 6 s iPhone Bluetooth will pair with El Capitan Mac but does not connect

  My employers very kindly gave me a brand new MacBook Pro running the most recent version (10.11.4) of Mac OS X.  What finish set up I need to pair my iPhone staff 6 (running iOS 9.3.1) to the computer I want to use MacID to secure my computer when I'm away from him.  While the phone would pair (pairing being initiated by the Mac) it would be briefly apply status 'connected' before going to "not connected".  When I then tried to establish a connection, I received the following message on the iPhone:

  Connection failure

  'MacBook Pro' is not supported

  and the only option to close this dialog box click the device forget .

  I therefore looked on my personal Mac which had previously been paired with the phone to find that he was is no longer listed in the devices Bluetooth, but when I looked in the settings for MacID running on my Mac it says "Looking for iPhone 6 s.  I tried to re-pair 6s iPhone to my personal machine and had the same results.  When I called in my TI guru we tried with his iPhone 6 (also installed 9.3.1) and had the same results.  As it's been a few months since I used MacID on my computer that I don't know when the link has been broken - after an update iOS or OS X update.  Bluetooth linking to my Apple Watch still works perfectly.  I was unable to try this out with any other Mac, I was looking for one with an older version of Mac OS X.

  Everyone is aware of this problem or have an idea for a fix?

  TIA

  An iPhone will not pair Bluetooth with a computer (Mac or Windows) for one use other than personal hotspot and it will only do that if the carrier is supported. However, there are a number of things will be using Bluetooth between the computer and the iPhone where the devices are NOT matched. More information in Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

  The following link for MacID support site has instructions on how to do the installation. It requires Bluetooth to be turned on in the computer and the iPhone, but the rest of the configuration/connection is done inside the MacID app on each device, not normal Bluetooth pairing as follows: http://macid.co/help/?c=Setup & sc = Pairing % 20A % 20device

• iPod nano 7 will not recognize Bluetooth devices

  I just bought a nano 7. It does not recognize the two sets of speakers blue tooth that we have.

  I turned Bluetooth on my phone and iPad.

  I also put earphones into the Jack.

  my phone and iPad work with the speakers.

  the nano sticks right on the search for devices and recognize any.

  any ideas?

  Did you follow the instructions of the 7th generation iPod nano (page 53-54) user guide

  https://manuals.info.Apple.com/manuals/1000/MA1624/en_US/iPod_nano_2015_user_gui.PDF

  I also put earphones into the Jack.

  If you try to connect via Bluetooth audio, why do you have headphones plugged into the iPod?

• I just bought itunes game. New songs THAT SINCE won'y sync, I bought with my ipod Nano. Will they or is an incompatible Nano ipod?

  I just bought itunes game. New songs THAT SINCE won'y sync, I bought with my ipod Nano. Will they or is an incompatible Nano ipod?

  Hello

  I hope the music in your iTunes library and is not in the cloud, you should be able to sync with the iPod nano, which remains compatible with iTunes iOS.

  Jim

• Headset Bluetooth will pair with the laptop. Argh.

  I find it quite impossible to pair my Bluetooth BH-01 for my Toshiba headset in Windows 8. I set the camera on the charged pairing mode then the computer to search for devices, and it has always come in white. I tried troubleshooting, to change parameters, whole enchilada, but nothing has worked. Is - this headset simply do not pair with Toshiba laptops? What is Windows 8? I'm completely confused.

  Zealous salvation,

  1. are you able to match other bluetooth devices?

  2 have you tried pair the bluetooth device to another computer?

  You can check the compatibility of the device to the Windows Compatibility Center.

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home

  I suggest combine the device with another computer by using bluetooth and check.

  If you are unable to pair another bluetooth device, then uninstall and reinstall the drivers of bluetooth on the manufacturer's Web site.

  Provide more information so that we can help you.

• iOS10 Bluetooth is not pairing with UConnect

  I can't get my iPhone or any iPhone iOS 10 to pair via Bluetooth with my Jeep and the UConnect system.  My iPhone 6 after upgrade to iOS 10 connect to UConnect system as it always had.  I've recently updated for iPhone 7 and now I can't get my new phone to pair with the car.  I tried to connect other iPhones in the House running iOS 10 that were never originally paired with the Jeep as well and they all get the same error message "unsuccessful Pairing - Make sure"Uconnect"is turned on, in range and it ready to be paired.  The iPhone sees the Uconnect as a Bluetooth connection, but is not pair.  UConnect system running their most up-to-date version of the firmware 16.16.13.  Any suggestion would be appreciated.

  Hi there, HuskyDog94.

  I see that you are not able to match one of your iPhone on iOS 10 with your Jeep uConnect system. I like to use my hands free iPhone and I'll be happy to help you!

  Help to connect your iPhone, iPad or iPod touch with your car radio - follow troubleshooting steps under the heading "If you use Bluetooth.

  Thank you for using communities of Apple Support and take care!

• Problem syncing with iPod Nano

  I have an iPod nano 3rd generation. He stopped properly syncing with iTunes. I have the latest version of ITunes and Windows 10. It is always synchronized automatically before. The computer recognizes the iPod and it's synchronization on iPod, but not on the computer screen. None of the songs I bought on iTunes since it began have been added to my iPod. I also noticed that new Playlists, I added to iTunes also syncs.  Maybe it's the same cause.  I appreciate your help. I'm nervous about what he is going to erase my iPod and then Resync.  I don't want to end up with nothing on my iPod!  I spent hours trying to understand, without a bit of luck. Thanks a lot for your help!

  One thing to check is the parameter to sync music on settings of music from the iPod screen.  Here is a screenshot showing the screen.

  

  Perhaps the box sync music got disabled for some reason any.  If it is not checked, the iPod is currently set to manually manage the music.  It will always 'sync' when it is connected, but the content does not sync automatically. However, existing content on the iPod.

  NOTE: If you change this setting (and apply) Sync music is currently not checked, all the songs on the iPod that are not in your iTunes library will be lost.

• Bluetooth is not pairing with speaker JBL Flip 2

  iMac bluetooth is not pairing with speaker JBL Flip 2. It worked well for 8 months. Yesterday, I paired with my iphone. Now the 2 Flip not will pair again with my mac mini, OS El captain. Bluetooth is activated, now detectable as «Of Deborah Mac mini» JBL Flip 2, not connected devices. I tried to enter the number on the speaker and the pair. Without success. The current number of bluetooth is different from the number of the enclosure. Please tell us how to fix.

  Debbie

  I disconnected the Flip2 and matched. It worked. Thank you.