Will be produced recovery disk works with new HARD drive?

Similar Questions

• Help! Installation of HP Vista recovery disks to a new HARD disk

  I found the same problem in this forum and several others online, but have not been able to find one with a solution!

  I have a HP Pavilion Notebook DV6633US

  It has a 120 GB of HDD with Vista Home Premium

  I created recovery discs when I got to the computer

  Last week, crashed HARD drive.

  I bought a new Western Digital HARD drive (the original in the laptop was a Seagate)

  The Western Digital graphic shows the compatibility with my laptop specifically

  I upgraded from the 120 GB to 160 GB

  I tried to run my recovery disks

  It installs the necessary boot files, runs the Windows progress bar and then goes to a blue screen with an operable mouse cursor and an error message that says:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  The laptop is out of warranty at this stage.

  I contacted Technical Support HP in 2 ways and got 2 different answers. I don't know who to believe and do not want to take the time or spend the money on ordering the wrong solution.

  Technology through the Online Chat support says:

  My recovery disks have "gone wrong", and I need to order new HP.

  They insist that will not solve the problem, but I have read in several places online is not the solution

  Technology through support email wrote:

  If I buy a hard drive through a third party, no HP recovery disk will work and I need to buy a new installation of Vista (obviously expensive);

  Just bought HP hard drive works, it comes with its own recovery disks. The recovery disks have a tatoo/signature for specific hardware.

  The HARD drive I bought was reduced to $40. The HP HARD drive is $ 130.

  A ride more. If the HARD drive has a tatoo/signature on my initial, recovery discs - it true for other components?

  While it was still under warranty, I got a CD/DVD defective drive replaced, also a defective mother replaced, and I added the additional RAM.

  I saw several other posts with the same question and a number or suggestions are displayed, but it seems that they never send once they have found a solution that worked.

  Before I bite the bullet and spend the $130 on their HARD drive I want to be sure that will work, and if there is a way I can make it work with the HARD drive that I have bought, I would of course like to do.

  Here, any help would be greatly appreciated!

  SOLVED!

  The recovery discs HP factory arrived today and they work... It installs my original factory image as I type!

  It's been almost 2 weeks to get this figured out, but it does not work... so if my omitted self-created recovery discs can be used on a new HARD drive, the factory recovery disks succeeded.

  I just wanted you to know everything for the next person can find the solution that actually worked.

  Thanks for the help and comments!

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• What is the measure to take to get my card to work with my hard drive that I just put in?

  What is the measure to take to get my card to work with my hard drive that I just put in?

  Run Windows Update and install all updates.

  Also, visit your PC manufacturer's Web site and install the latest driver.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Recovery disk works with a disc hard non-toshiba?

  Hello, my hard drive gave me a couple of days, and I was wondering if I put a new drive hard non-toshiba in my satellite pro L10 would work the recovery disc again correctly or it will have to be the exact same hard drive that the laptop came with?

  Thank you

  James

  Hello

  If the BIOS will recognize the new HARD drive, I see no reason why the recovery CD should not be run
  But before you start the installation from the recovery CD, you need to format the HARD drive. You can use the original Windows XP CD for formatting the HARD drive!

• Will be restore disks work if the hard drive is erased?

  If the disc is damaged so that the Partition of Rercovery HP is no longer there, the drive can be reformatted and him pre-installed windows 8 restored from the HP recovery disks that I made? I understand the other files will be lost, I want to just the dos system.

  Hello

  Yes, on the whole has been successfully created, it will work with the NEW HARD drive (or old formatted the HARD drive).

  Kind regards.

• How to install Windows without recovery disc - Satellite A660 with new HARD drive

  Hey,.

  Portable 500 GB HDD of my friend Toshiba Satellite A660 seems to have died.
  I tied him to my laptop on a sata dock and runs a data recovery program because nothing has been saved. The recovery takes forever, however, and she really needs his computer to work.

  Because the hard disk may be damaged in any case, I am considering buying a new hard drive and install in the Toshiba.

  How can I do this without a recovery disk, though?
  The old drive was a partition recovery on it, I think, but this seems useless with a new drive.
  Operating system is Windows 7 64 bit home edition.

  The product key is on the bottom of the laptop.
  I live in Turkey and so I don't think there is a Toshiba store is close.
  There are individual computer stores, so I'm confident, I can buy a new internal hard drive (I could find the sata dock here), but he must know what to do to install the software, etc.

  Thank you!
  Chris

  > How can I do this without a recovery disk, though?

  You either have the recovery disk or you are going to install the system using the Microsoft Windows disk.
  The necessary drivers are in internet on Toshiba UE page.

  The recovery disc can also be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Is it possible to use the Acer restore disks on a new hard drive?

  The hard drive on my Aspire 5251 appears to be dead. He was behaving erraticly and we tried a full restore via the program eRecovery a couple of times and it is always wrong (error 0x45d). We also tried discs that we did when the laptop is new with no luck.

  I bought and installed a new hard drive, but can't get the disks to install on it either. I'm guessing that it is looking for something partitioned the original hard drive because he says that something is missing. It is more under warranty and I can't figure out how to order the full install discs from Acer. Is it possible to get these recovery discs to work?

  Also, FWIW, I installed Ubuntu on the new hard drive just to see if it works, and it's so I know everything works at least.

  TIA

  Yes, you can use your Acer restore on a new hard drive disks. If you have installed ubuntu, you may need to format the HARD disk and to create a partition on the disk hard so that the discs work.

• How to reinstall Vista on PC Toshiba laptop with new hard drive?

  Hard drive from my Toshiba laptop of sisters died as well as its internal fan and she asked me to fix it, well I got a new hard drive and replaced the dead with a new internal fan and works perfectly fine with a Linux Live CD. However, she had previously Vista Home Premium installed on it, and there was no installation CD, just 2 recovery discs. Now, I was wondering where I could get an iso image of vista UNACTIVATED so I can use his legitimate product for her key. (I also have a week to achieve and I repair to other computers as well, which are not a problem, so time is of the essence)

  Also, I have no money and can't afford to get a Best Buy installation CD, as the operating system has already been installed on the laptop/OEM computer. If that would be legal so getting an online and burning a black CD and use it to get Vista on this new hard drive of his?

  In addition, I know how to install its drivers, and upgrade from SP1 to SP2 via Windows Update Manager, all I need is a vista installation CD Home premium to get his computer upward and execution of how she wants to.

  * original title - I need a Vista Home Premium Installation CD Unactivated *.

  Thanks for the quick response, so you're saying I haft to buy an installation CD to install legally?

  Hey mikethedj4

  None

  I never said you had to buy a dvd installation anywhere in my answer

  I said that there is no free and legal download

  read all of my answer

  I advised you to start from the 1st recovery disk and if you have any problems contact toshiba at the link I suppied you with

  or follow the rest of my advice on borrowing a microsoft dvd vista and using your product key with him

  what he may not know is that microsoft vista dvd contains all versions of vista

  This is the product key that installs the correct version of the dvd

  There are 2 microsoft dvd vista a 32-bit and one for 64-bit operating system

  most of the computers unless asked when bought normally come with the version of vista 32 bit

  Walter, the time zone traveller

• Windows XP system restore Boot Failure with new hard drive

  HP Touchsmart IQ546t running Windows XP Home Edition

  Here is my story:

  A few months ago my PC was informing me that a hard disk failure is imminent and how can I back up my data.

  I was able to get most of the data backed up and has continued to use the PC.

  Finally, the hard drive failed.

  Not being not able to find system restore disks, I ordered a set of HP.

  In the meantime, I was able to save the rest of my data using an external hard drive enclosure, a laptop and a backup disk.

  I used system restore discs to erase the hard drive and restore the operating system.

  After the successful restoration, I was able to boot my PC and use it for a few days, but again became imminent hard disk failure message. Yet once again, the hard drive failed and I was unable to use it.

  I decided to replace the hard drive, thinking I could install and use the system restore disks to get the installed operating system.

  I followed all the instructions, I find and could not start the machine to the point he will recognize the recovery disc. I receive a message that tells me to insert a bootable media.

  Does anyone know what I'm missing here?

  Is there something I can try to get the hard drive to boot to the point he will recognize the recovery disk?

  Thanks in advance for any advice.

  Hello

  OPS, sorry on this subject.  If the recovery discs are not recognized not so you act have a problem trying to get the new HDD to be restored.

  Try the procedure below and see what happens.  View your results.

  Cyberlink CD recovery for hard drives. When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

• HARD drive failed - attempt to recover with new HARD drive

  Hello

  My wife & I have the exact same model laptop computer Pavilion dv6, its hard drive has recently failed the test & stuck on the preparation of repair automatic screen

  If I create a my laptop recovery disk & load with a new hard drive installed on his laptop that work or are unique to each laptop recovery disks?

  Thank you

  Hello

  Recovery disks read one "tattoo" on the chip for the bios to make sure that they are used on the correct machine, however as long as the two laptops are identical (that is to say that they have the exact same material and came with the same version of Windows), then the disks created on your laptop should also work on machine of your wife.

  Note:  When to replace the HARD drive, choose a disk of the same capacity (or slightly more is okay) as the original - installing a drive which is lower in quality that the original often causes problems with the recovery process.

  Kind regards

  DP - K

• Qosmio X 500-warranty with new HARD drive?

  I purchased a Qosmio X 500 last month (warranty: 1 year)

  If I change my hard disk and install my own Windows 7 on it, I lost my Toshiba 1 year warranty?

  Thank you!

  Hey,.

  Don t be to worry about this! You will not lose warranty if swap you the HARD drive and install another operating system. These easy updates as HARD or RAM drive poses no problem, but don t disassemble the whole laptop.

  By the way: If burn you the Toshiba Recovery disk, you can install the Windows 7 preinstalled on the new HARD drive too :)