Will HELP WRT610N - Do not get the IP address of the router?

I had trouble with my WRT610N...  It of sortof in brick after attempting to upgrade linksys firmware again.  Unable to access but to pings.  I've held reset and plug in the unit and access management screen and download the latest linksys firmware.  He waits and says will take in the results screen well after the time it is trying to load, but says cannot display... If I type 192.168.1.1 I can screen settings...  Apply all the settings and it seems to work, but if I unplug my router or do the 30/30/30 reset firmware and I'm back to the management screen...

After coming back to the method of administration and the firmware installed again.  When I return to the settings of the router, it keeps all my settings, such as changing the password and settings wireless, but for some reason not the firmware?

OK, so I have the router to hold the linksys firmware after a restart of 30/30/30... However the router will not get an ip address from the modem... Any ideas there?  Thank you!

Well, seems to work for now... I unplugged the modem and the router... A modem plugged in when he was on the rise and I plugged the router running in and hooked up to computer and after a few it obtained IP and seems to work well.

Tags: Linksys Routers

Similar Questions

  • I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

    I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: opens showing the file

    It is not usually necessary to create an exception for the certificates.

    Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

  • Procurement of the game Clash of Clans the sum was deducted from the iTunes account and did not get the jewelry... help me solve this problem

    the procurement process from the shock of the clans the amount was deducted in full and did not get the gems has helped me

    Have you contacted the developer of the game? If you have, and they cannot / does not help, then try to contact iTunes Support: http://reportaproblem.apple.com

    Edit: Corrected URL

  • My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

    My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

    Visit the HP website and look.

  • Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

    Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

    Thanks Tanuj,

    After reloading the software it seems to work now.

  • Cisco E1000 does not connect to internet-do not get the Comcast modem DHCP ip address

    Very strange problem...

    I have Comcast HSI and use my E1000 Cisco (Linksys) for about 3 years now. Bought as a refurb.

    My problem is that the E1000 is NOT receiving DHCP of my modem Comast info.

    Internet works when my laptop is fixed directly to the modem; but when he connects to the internet port of the modem

    to the internet port of E1000 is NOT attract my IP from DHCP ISP so no client can broswe 'wired or wireless.

    I've even updated the firmware and starting to think its time to get a router 'NINE', as it is NOT LOGIC!

    I can't release/renew as I have NO ip address for free.  I tried to configure the E1000 as static

    using the ipconfig/all for when the laptop computer and the modem is connected. Comcast said they don't see anything on their end.

    I also have factory default router and Redid the config without result.

    Any help would be appreciated.

    You must activate the clone MAC address of the router to recognize the connection to your cable modem. The link below will tell you how to configure the router to work with a connection cable and how to clone MAC address.

    Setting up a Linksys router with cable Internet service

  • I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

    I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

    Is there a solution

    original title: AutoPlay Windows 7

    It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

    PIECE AUTO REPAIR
    USING GROUP POLICY EDIT
    gpedit.msc in search
    Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

    In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

    Open regedit and locate the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

    Change: NoDriveTypeAutorun to 0 x 91

    If necessary, create this key as a DWORD.

  • Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

    Hello

    I'm doing a P2V with vmware converter standalone 5.5

    The source is the same machine that hosts the vmware converter 5.5

    The operating system is W2003 which acts as a domain controller

    VMware converter is launched by the administrator account.

    The error that I see on the balls of vmware - converter.worker is:

    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
    2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
    2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
    2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
    2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
    2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
    2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
    2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

    This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

    Any help or advice would be appreciated, thanks in advance

    Thank you for all your help

    I finally found the guilty service.

    It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

    It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

    Hopefully this thread will help others in the future.

  • Why I can not get the Norton Toolbar? In the menu, the add ons, extensions, it says Norton toolbar is inconsistent & disabled.

    I can not get the norton for 36 firefox toolbar. Have run Norton live update repeatedly. He updated of all good and applied a patch. When I go to the firefox menu > Modules > extensions, toolbar Norton is grayed out and says he is not compatible with firefox 36 and is disabled. Help! I need my Norton safe.

    Hi Cathie7372, according to Norton the latest version of the toolbar is compatible with firefox 36 is 2014.7.10.26 - your watch as 2014.7.10. 16...

    as norton distributes the updates themselves we are probably not able to help much - please contact norton support if you do not receive the last update, even after running liveupdate repeatedly. they should be able to help get their product to date.

  • Satellite Pro L300 - 12 H did not get the IP address of the DHCP router via cable

    My Vista Premium SP1 laptop is connected via a wireless connection to a modem/router ADSL Buffalo WBMR-G54 model that works very well. However, I tried the other day to connect the NIC via a RJ45 cable to the router and it won't work! I get the message "limited connectivity" and an IP of 169.254.xxx.xxx that suggests he does not get an IP address from the router.

    I was on various websites and tried all sorts of things as uncheck ipv6 on the properties of LAN card, put off the power of the DHCP Broadcast flag in the registry (according to the number of micrsoft) etc but nothing works.

    Anyone have any suggestions to make it work?
    NB: I took the laptop in work and plugged into the Windows 2003 Server network and got a DHCP IP immediately!

    You asked for help by your Internet provider?

  • I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

    Hi everyone, this is my first post, also help on the post would be appreciated.

    I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

    Thanks in advance

    Newbie

    The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

    I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

    R

  • I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

    I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

    Try the following. It seems yo may have to let the battery drain is completely:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

    Hello.
    I'm getting desperate. I tried everything I could imagine.

    First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
    Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

    Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
    Thanks in advance.

    Can you please send the number of full model of your laptop?

  • Satellite L10 - 195 - could not get the WIFI connection to the internet

    Hello

    I downloaded and installed the latest dirvers for wireless cards and EThernet for my laptop but I can not get the wireless to connect to the internet!
    Please help me before I crush my laptop. :]

    Thanx

    PS: Anyone know if there is one special way (other than the function keys) to swith the wireless on?

    Hello

    This may be a stupid answer, but on my laptop there is a switch on the front of the laptop that needs to be enabled for the wireless work. I saw this as a first step, and it doesn't seem to be well documented. Good luck.

  • can not get the content in this area (dublin, Ireland)

    tried to download the trial of office clicked on office bureau chief, said he may not get the content in this region dublin Ireland I did something wrong

    Hello

    Many posters have managed to install the trial of Office for download and registration of the trial, and then install. ; instead of simply downloading.

    This answer from another Thread can help you.

    http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/Microsoft-Office-Download-Manager-message/9b252caf-1bb2-4118-81e3-8878d668d3f7?msgId=dfa48ae1-85D4-4f3F-965B-037795f11399

    "I solved this problem in a surprising way - rather than the Download Manager LAUNCHES, I chose to SAVE it, and then he ran after it and it is more me gave this error."

    See you soon.

Maybe you are looking for

  • Blocks Firefox NYTimes as "non-secure" - should "allow" every time.

    "This website does not provide identity information." «Your connection is encrypted only partially...» "This is the site of the New York Times, for the love of heaven. This extremely annoying Firefox behavior is new in Firefox 23.0.

  • iMac too slow after upgrade of El Capitan

    I get a lot of beachballing and slow start. Etrecheck said that protec6b is obsolete in the Yosemite OSX. What and how do to this day. com.Apple.csrutil.report.plist [failure] [loaded] 42 tasks Apple [failure] com.adobe.ARMDCHelper blah blah blah (20

  • resize the taskbar, quick launch icons,

    You have the ability to resize the police why not icons, tasks or the Quick Launch bar. Why 3rd party? Its nice that you get apps to do just this, but it would be nice if it came intigrated with broth.

  • reconstitution of the wave

    Hello I use a wave generator to simulate a wave of 200 Hz and a capture card OR used to acquire the signal. I think according to the Nyquist theorem, I must acquire at least 2 x the frequency of the wave. I am thus, acquire, in samples keep, to 1000

  • What are the solutions for remote use unauthorized computer via a virtual private network?

    Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" wi