Will I lose data conversion to double precision single-precision float?

Similar Questions

• Snapshots - delete everything - is - will I lose data since the last snapshot?

  I took a snapshot of May 7 of last year.  It seems to be the only photo.  If I select Delete all... I lose all the data?

  

  Here's my data store and the files it contains.  Will I run out of space in the process?

  

  Just to be clear... The server has worked in Production, because the snapshot shown on 7 May and I DON'T want to lose the data.  I need server to stay in the State, he is today but to free up space to add an another VM on the host.

  With this version you should not even additional disk space, since the change with snapshots of consolidation made in update 5. You should be able to consolidate 4 snapshots (2 on each virtual disk) without problems. If you get a time-out error in the GUI, don't panic. This can happen if the consolidation of the snapshot takes longer than expected. Just allow the ESXi host is finishing work.

  André

  PS: If you're worried, run the consolidation of the snapshot after a full backup of the databases.

• dynamic double bit data conversion

  It could be very simple, but I was confused. I have current data and average data as in code. I want to build the table using these data, save them on my hard drive and open in word with header (current and average)

  Problems:

  I have data from two sources in lead generation and versions table as shown entry table to write on the worksheet vi. I get the error source is dynamic and double sink is a bit. It is the most difficult part of my life to find out what range of conversion to use.

  When I run the vi (lets assume the good range of conversion is connected and there is no conversion error) pops up the dialog for path that comes up constantly on dialog

  Ideally I want appears on the screen when I press on would go so that I can browse location to save the file, and once the path is specified vi works continuously and the data is written to the worksheet while vi is running.

  Thanks a lot for reading and help

  See you soon

  Welcome to the evil world of dynamic data. What you really want to use is the merging of signals feature. When you do this a dynamic data conversion will be automatically added between the signals to merge and writing on a spreadsheet file.

  You can consider using writing to the file position as directly accepts dynamic data.

  With respect to the path, use a shift register.

• If I upgrade to win 7 I will lose data stored vista files?

  can anyone help? If I update to windows 7 I will lose data stored. That is, movies, music

  An upgrade maintains your files, a custom installation does not work. It's a good idea to back up your files before upgrading to Windows 7.

  Back up all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).

  http://Windows.Microsoft.com/Windows-easy-transfer

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Installation - 'upgrade' means what?
  Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

  Installation - what does "Custom (Clean)" Mean?
  A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

  • Back up any files and settings you want to keep

  • Install Windows 7

  • Reinstall all your files

  • Reinstall all the programs you want to use.

  These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.

• Calendar Creator does not start. I reinstalled the program - the same result. If I uninstallthe and reinstall then, will I lose all my data?

  I use Windows XP.
  Calendar Creator of Broderbund does not open. I reinstalled from the disk and got the same results. I have used this program for a few years.
  If I uninstall, will I lose my data? Your suggestion (s)?

  Hi Jerry,

  I suggest that you contact the software manufacturer for further assistance. In addition, check if there is an update of the program version.

• If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  Original title: carover

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  It seems that you do not have to back up your data regularly. A lot of people don't. By far the best incentive for them to change their habits is a disastrous loss of data. In this forum, we receive their calls for assistance with great regularity.

  To answer your question:

  • People do not back up their irreplaceable files regularly (e.g. weekly) will sooner or later lose them. It's only a matter of time.
  • People performing a major operation as an upgrade of the operating system considerably increases the risk of losing their data.
  • Those who backup their data without immediately pick up some examples of files on another PC often find that their untested backup is useless.

  This current position illustrates the problem.

• conversion of double full

  Hello

  I may be a stupid question.

  I have a double table, this is a first entrance to the Mathscript, two column such as: 1.0000, 2,000,... etc. I would like to than conversion it doubles as a whole, because I will use it to index a table. When I run the VI, I get a runtime error. It seems that the explicit conversion does not work. In Matlab, I can conversion data types on the same path.

  Index codes-90026 matrix of error must be whole real and positive

  My code you can see on the picture below.

  Help, please!

  I solved the prob

  I started indexing 0 and not 1. which the problem occurred.

• Convert a table to a cluster of 4 elements array values 2D 2D double precision, or a table 1 d

  Y at - it an easy way to convert a 2D cluster table (4 elements each including a Boolean value and three numbers dbl) to a table 2D or 1 d of double precision values? I need to store my data in a text file to control a robot, I'm trying.

  Thank you.

  There are 1 million different ways to do it. The best thing to do would be to leave the data exactly as it is and simply use Flatten in XML format (search the palette). It accepts virtually any type of data, including a 2D cluster table as you described. He will spit human readable (although not necessarily nice) text that you can write to a text file. Then, read you data from the file and use Unflatten of XML to do the reverse.

  Or you can use a similar model to flatten your data in a 1 d of double table which you can then unflatten.

  

• VISA Read Double Precision Corruption number with the 2400 Keithly

  I am confused on this point.  I have two systems with built in GPIB Controllers PXI.  Among the randomally systems began to show the behavior where the double precision read data returned orders gibberish.  On the other system, I use the same code and everything works.  Chain controls standard job very well (voltage value, current value, query set of voltage etc.).  I tried the following:

  Reset computer

  Keithly instruments exchanged (the problem follows the PC)

  Exchanged GPIB cables

  Update driver 488.2

  Used separate HS-USB-controller GPIB.

  I will be reinstall NI-VISA as well.

  The only difference is that I installed a few other drivers LeCroy instrument to the failed system.  But the problem is a not deliver after I installed the drivers, it occurred during the performance of my code.

  Has anyone ever seen this before?  What could be other causes?

  The problem was with the Keithley, change the format of the data without my knowledge.

• Will I lose my google account or microsoft word or email and the email records if I reset firefox?

  Increase the grip on my firefox ("not responding" sometimes "the script is not responding"). Last night the mozilla would not respond to my email, so I opted to close the session. What a mistake. I lost all my email, some of them, business correspondence. Will I lose my Google account, e-mail and files written or my program Microsoft Word or Internet Explorer if I "reset"? I'll wait for a response before as I have "reset". Thank you for your service. Sincerely.

  This support article describes what refresh: Refresh Firefox – reset settings and Add-ons.

  But to answer your specific questions:

  I'm going to lose my...

  • Google account: No. If Firefox don't forget your Google password, you can log into your account and save it again.
  • E-mail: No. your email is not stored in Firefox, it is either stored on the e-mail service provider's website or a separate e-mail program, or both.
  • writing files: I'm not sure what this is. If you are using an add-on to create/save these files, then it is possible that the files will be gone after a refresh because the data associated with the modules are removed. However, if you have created these files in any other way, they should not be affected.
  • Microsoft Word program: No.. A Firefox Refresh does not affect the Microsoft applications.
  • Internet Explorer: No.. A Firefox Refresh does not affect the Microsoft applications.

  I noticed that you mentioned a "Reset". Windows has a reset function. I'm only talking about Firefox built in refreshment and not resetting Windows.

• Will I lose my music/videos if I delete my folder "downloads" after I transferred to my iTunes?

  I want to delete all my music and video files in the folder "downloads".  I transferred all these files to iTunes but will I lose the music and videos if I delete the folder "downloads"?

  The normal behaviour for iTunes is to put a copy of media that you add manually to the correct iTunes media folder, so in theory, you can remove these downloads.  If you want to double check you can right click on the item in the iTunes window and > show in Finder to reveal the real iTunes file uses.

• I installed firefox Aurora, but can I uninstall it and go back to Firefox 11 if I find the 11 version better? Will I lose the history and bookmarks?

  I installed the new version 13, called Aurora. I currently have, but if I start to dislike the new features (until now I do! But I have to ask) can I 'come back' to the 'good old' Firefox 11?
  Will I be losing my data and settings? History and bookmarks?

  My computer is a Pentium M 1, 6 GHz (2004) and version 11 seemed very stable. I installed Aurora is because I wanted to try your new software.

  Yes, you can uninstall the aurora and install the latest stable version whenever you want without losing the personal data because your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.

  Thank you

• I'll lose data from the drive of the partition during recovery?

  Hi all

  If I use the toshiba recovery CD to format my system, I'll lose data from the disks partition as well or just the C:?

  Hi Justin

  Well, what recovery CD you want to use?
  As much as I know several months Toshiba uses a new version of the CD recovery called Reco.
  You will find the settings option and there you can choose the option when you want to recover the operating system. I think that the first partition is erased.

  The old version of the recovery CD has supported two different options: standard and expert mode. Here it is important to use the expert mode if you want to choose the partition where the OS must be installed

• RND4000 - change the hard disks, will that erases data on older players

  I took out the old records and set it asside.

  Then put in some different readers. Different drives are from a NAS RNDX4000 and they initialize automatically.

  I wasn't expecting that.

  Now, if I take on different disks and put the old disks in will I lose all the data?

  I need to still get the data on the old disks. They worked very well.

  I don't want them to be initalized.

  The reason is that the RNDX4000 was struck by lightning. Really wanted to get information out of thoes readers. Now, I don't want to lose the information I had in RND4000 work.

  OS 4.x ReadyNAS all begin with the formatting of disks when they are hot-inserted and in many cases even when they are not hot-inserted.

  But if you turn off, insert the old disks in their original locations, and then powered on, then the system should simply repeat the operation without loss of data or reformatting.

• Imaging of double precision of uint8

  Hello

  I am writing a program that manipulates image processing image gradients. Since negative gradients come into picture, I need to convert the image in double precision type uint8. How can I do this? I tried to use mathscript and although the double precision is obtained using the double function I need to leave mathscript to perform other operations such as filtering. How can I transfer this image of double precision outdoors and filter with it?

  Hello

  If you are satisfied with the float data type, why not just use the convolution operator?

  For example (using a kernel of Sobel, you can choose your own of course):

  

  Best regards

  K