Will IE9 offered through Windows Update since March 14.

Similar Questions

• Error code 646: Windows Vista re Office 2007 SP 2 through Windows Update

  I am running Vista Home Premium, SP1, 32-bit.   Office 2007 SP1 is installed.

  I've restored an Office 2007 SP2 hidden (and almost forgotten) update.   Failed twice.  The error code is 646.

  Since the update wouldn't install and just sitting there, looking at me with a big red FAIL on it, I hid it again.   Please let me know if there is a procedure to follow?

  BTW, I ran into the same problems that other posters have recently that some updates installs successfully through Windows Update, others I had to install directly on the Microsoft site.    Once the updates have been installed manually, of course, they were not offered by Windows Update.

  Should I give the Office 2007 SP2 a whirl and try to install directly from the MS Download page, or is there something else I should do/check before this attempt?

  Thanks in advance!

  Download Office SP2 on the download site and try to install manually.

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=SP2&displaylang=en&sType=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• Error 80070020 when installing nVidia GeForce GT 230 M through Windows Update.

  Original title: suddenly my Windows 7 does not detect my nVidia GeForce GT 230 M

  Everything was going well until I tried to update the graphics driver through windows update... suddenly the solution of problems on my screen and everything is a mess now... the update installation failed, I tried again and again but did not work and it it gives me error Code (80070020)! I tried to download the driver from the official site but there not too... as if she has not detected any graphics card! I tried to look for the reader to "System information" and I went to check the display and I found nothing! as if it just disappeared in the air!

  Hey, Adnan,.

  This problem could be caused due to the update of the driver failed. Uninstall and re - install the latest drivers could do the trick.

  Reference: http://windows.microsoft.com/is-is/windows7/windows-update-error-80070020

  Here are a few steps, try.

  1. start the computer in safe mode.

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode

  2. find the nVidia GeForce GT 230 M under adpaters to display in Device Manager. In addition, let us know what other driver, you see under graphics cards.

  -Click Start and type Device Manager in the search start and press ENTER.

  -Press on the longer brand before graphics cards.

  -If you see the nVidia GeForce GT 230 M, right-click on it and choose Uninstall. You may be asked to remove the driver software. Press OK and continue.

  -You may be asked to restart the computer. Do not restart the computer.

  3. check that the software nVidia in programs and features.

  -Type of Control Panel in Start search, and then press ENTER.

  -Select programs and features , and then click uninstall a program.

  -Check the nVidia software. If found, select them and click Uninstall.

  -Once all nVidia-related programs are uninstalled, restart the computer and start the computer to nomally.

  Once the computer restarts, it will try to check for new material and to download and install display drivers.

  Since you have already downloaded the nVidia drivers, install them and restart the computer.

  Note: Do not install the drivers that are provided in the Windows updates. It is best to download the latest drivers from the website of the manufacturer of the computer.

  Hope the troubleshooting steps to help you solve the problem of video driver.

• When Windows 10 stable will be released via Windows update, will be my documents and programs on Windows 7 automatically migrated?

  When Windows 10 stable is pushed to users later this year through Windows Update, what happens to my files and programs on Windows 7? They will be transferred to the new operating system automatically, or do I have to save all my all my documents, pictures, music, etc. on an external storage device?

  In addition, what will happen to all the programs I currently installed on Windows 7? Will be my program settings/preferences and programs migrated, or will I have to reinstall all the programs myself and change the settings/preferences again?

  Jeffrey

  If you have chosen to upgrade (not the best choice) you data MUST be migrated. If you value your data I would like to back up and do a clean install also own installs are always better.

• Cannot install Office 2013 updates manually or through Windows Update

  I can't install 17 updates for Office 2013, each date of 12/02/2013, through Windows Update or manually.

  I get a "Code 80070643" error message when you try to install these updates through Windows Update. I performed the steps of troubleshooting for Windows Update, including diagnoses FixIt and the fix for the .net framework, I uninstalled and reinstalled Office 365 Home Premium, try a clean boot installation I downloaded two files to install manually, and these attempts also failed. The result of this tells me that it is a problem of Office and is not a problem of Windows Update, but given what I tried, I don't know what to try next.

  Hi Rmiller,

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  According to the description, you are faced with problems with .net Framework update and receive error code 80070643.

  I suggest you follow all the steps of the article mentioned below and check:

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows 7 update failed after freezing on farm and would not install through Windows Update or installation manual

  Hi, once windows 7 installed successfully 5 updates I tried to restart the computer, but it would not be closed after that some time I did a cold longer closed. After booting even once, Windows 7 does not recognize the updates, as it is installed and I tried to install them again through Windows Update, but also install the updates manually and they all fail to install.

  The error code given is 800F0900

  The updates are:

  • KB978601
  • KB979309
  • KB979683
  • KB981332
  • KB980232

  I use Windows 7 ProfessionalAny help would be much appreciated! Thanks in advance.

  Hi msbubu,

  Step 1: Run System File Checker (SFC) scan to repair corrupt system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: The clean boot computer and then try to install the update one at a time 

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to STEP7 followed normal startup in the link.

  Update security for Windows 7 (KB978601)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8d4a6c65-E171-4570-8F3F-118f06910baf

  Update security for Windows 7 (KB979309)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=f0dbac52-0f0e-40bc-9371-17fa594424d5

  Update security for Windows 7 (KB979683)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ff58d80c-33ce-4d9e-AAA5-0b1841458931

  Update security for Windows 7 (KB981332)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c3f76835-0053-4E53-A451-14255e7a4fc0

  Update security for Windows 7 (KB980232)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=389184c5-9001-497d-bdf4-81f97ecb617f

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• You are trying to add my Canon MP550 printer through Windows Update, but get error 0 x 80240044

  I am trying to add my printer Canon MP550 series through windows update and error popup "error 0 x 80240044. Can someone help me?

  Original title: what is error 0 x 80240044 and not able to update

  Is there a reason why you have not advised him what operating system of Windows you are running including SP level, etc.?

  Contact the printer manufacturer to obtain the latest printer driver.

  UTC/GMT is 02:45 on Saturday, October 6, 2012

• Can I get the updated platform (KB971644) without going through Windows Update

  My company administrator has locked the Windows Update feature, but I would use the new Live Sync, which requires platform update (KB971644). Is there a way to get it without going through Windows Update?

  Install these 4 updates:

  971512 (http://support.microsoft.com/kb/971512/ ) Description of the Windows Graphics, Imaging, and XPS library

  971513 (http://support.microsoft.com/kb/971513/ ) Description of Windows Automation API

  971514 (http://support.microsoft.com/kb/971514/ ) Description of Windows portable devices

  960362 (http://support.microsoft.com/kb/960362/ ) Description of Windows Ribbon and Animation Manager Library

  Follow the links and download and install all updates 4.

  These 4 updates are the platform update for Vista.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• What should be the file size of Vista SP2 through Windows Update If SP1 is already installed?

  Hello

  Please could someone clarify this? I read on a few messages that if Vista SP1 is already installed then the Vista SP2 update file size should be around 40-50 MB.

  I checked manually through Windows Update > check for updates. He finds updated Vista SP2, but the file size is of approximately of 340-350 MB.

  Thanks in advance for your suggestions.

  http://TechNet.Microsoft.com/en-us/library/dd335036.aspx

  Indicates that there should be ~ 43meg for 32-bit and ~ 60meg for 64 bit.

  It can be substantially larger depending on how many updates between SP1 and SP2 are not already installed. Microsoft partner

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• KB976569 offered via windows update again and again, properly installed

  Hello

  I have XP Home Edition SP3.  I installed this update several times, but he continues to appear in my list of updates on the site of Microsoft Updates of the software to install.  Whenever it says the installation was successful.

  It appears in Add/Remove programs as if it has been installed, so why is this update continuously displayed in the list of updates must be installed on the Windows Update site?

  Any suggestions or explanations would be appreciated. Eric

  What is KB976569 listed in Add/Remove Programs [Yes/No]
  
  Yes

  Automatic updates (or the Windows Update Web site) still offers KB976569? [Yes/No]
  
  Yes

  The following may solve the behavior:

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck/unselect KB976569 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

  NB: If you are running a manual check for updates at http://windowsupdate.microsoft.com, you will see a prompt saying: 'you have hidden a significant update. You want to install it now? "Answer NO to this prompt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot download or unstall Windows updates since Aug. 12

  The last date on which Windows updates have been installed correctly on my PC has been on 12 August.  Since that date something prevents me to install new updates.  Whenever I click on the "Install updates" button on the box "Download and install new updates on my computer" for Windows Update tent to start downloading (the green progress bar appears for a second or two), but then my PC back to the "yellow shield with the message box"download and install the new update on my computer".  At first I thought it was just a busy time of the day at Microsoft, so I waited until a 'downtime' to try again.  Same no result... no download.  Several updates again 'important' security, but also the other "Recommended" updates are waiting for download and install, but I can't understand how prevents download of launch.  I ran my McAfee anti-virus every day hoping that there is some sort of bug that prevented my access to Windows Update, but no luck.  I also read a lot of Forums and tried a little suggestions and still not solve.  The last thing I tried was the 'Microsoft mount 50202' button and mode used the 'more aggressive' to see if it will address the problem.  The "Fix It" went through his program and when I rebooted the problem persists, although it shows in the State of Windows Update, now under ' updates have been installed: never ", where before running this"Fix It"he showed on 12 August in this status.

  As others in this Forum have posted, I ran as AUDITOR of FILES SYSTEM (SFC.exe) and after he ran, he has stated that he could not fix all problems found and had this message:

  Search the journal of Dir CBS.  windir\Logs\CBS\CBS.log

  For example: C:\Windows\Logs\CBS\CBS.log

  When I went to this Dir CBS log file and tried to open it, it says 'Access denied'.

  I saw a suggestion of "Reset Windows Update components" and something about the use of "Clean boot", but I'm not very good technically and have know idea what that means or steps I must take to fix my problem.

  I even had someone suggest that I had to completely reinstall the OS Vista together, which seems CRAZY to me!  This issue seems to be a simple problem to the surface (a possible corruption in the file: Windows\system32\wuauclt.exe), but when I search for this particular file "Research system" he cannot locate, then it must be a hidden Windows file.

  I hope that someone support Microsoft has the solution for me with a step by step fix recommendation, because from what I can tell, I'm not the only one having this problem for only the last 3 weeks or more.

  I have a Dell XPS M1530 and am running Windows Vista with Service Pack 2 installed.  32-bit Intel Core II Duo CPU T8100 @ 2.10 GHz and 4.00 GB RAM

  Hi Dan,.

  Thank you for writing to Microsoft answers Community Forums.

  Follow the steps below. It could help us solve the problem of update on your laptop.

  1 restart the computer in safe mode (to restart in mode safe keep pressing F8 on reboot).

  2. click on the start menu and in the search box start type CMD.

  3. in the list right click on CMD, and then click Run as administrator.

  4. at the command prompt, type net stop cryptsvc.

  5 rename C:\windows\System32\Catroot2 Catroot2.old.

  6 open the C:\windows folder, and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.old.

  7. at the command prompt, type net start cryptsvc, and press enter

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Aspire One 722 just took out of box will not connect to windows update.

  I have 2 identical Aspire One notebooks 722 running AMD chipsets running Windows 7sp1 pro.                              (SNID [redacted to comply with guidelines]) that does not connect to update the window. I have the built-in System Restore on a single noteboook to see if that would fix it. It there no. This is the news, I had them on the Board for the protection of labour. I tried for a month now to get Microsoft updates to work.

  I tried all the fixes and the tools I find on the net and within Microsoft to get updated to work and have had no sucsses.

  I even went as far as buying a new hard drive and a new copy of Microsoft windows 7sp1 drive still does not work.

  Everything elese works fine I can join any network at work. Surf the web, download electronic music or programs. No problem at all with the part of it. I get no error message or it is just to update program and the bar just moves a day if I let him. I do it all the patches from microsoft, they say that all is well, or fixed and still nothing.

  Think it's strange that a new disc of win7sp1 with a new HD it still does not work. I'm at my wits end.

  Anyone out there have the magic bullet miss me?

  Sure could use some help on this. No I won't update to WIndows 10 and forget about it. Ha ha

  Well @ 12:10 CST, I learned that I had 205 updates installed plus 5 in option.

  So it is now was the installation of updates since then.

  So, it does not. In the review I, that I did not did nothing before.

  This time, I did a clean installation of the operating system. Installed all the latest drivers. A through the online activation.

  Click updates in short order says something about downloading a new engine update. Screen went white and Brown a few times. Back to update sceeen were he sat running for approximently 12 + hours. Then, the notification of the necessary updates. And now it's @ 65 of 209 updates (installation)

  When this is done, I will do the same to the other laptop and hoping for the same results.

  Thanks to everyone who gave me advice here. It was great to have you share your knowledge and your encougment.

• Rvkroots.exe OLD contempt - MS has immediate fixed - offered by Windows Update

  Original title: ALERT! Bug in the automatic update of Windows Update/Microsoft Update. rvkroots.exe (v3.0.2195.0 January 2013)
  Fixed now since about 1: 20 a.m. et.
  
  

  No, no optional languages.

  MS has now fixed the problem so I will edit the first post.
  A few people at a forum I frequent also noticed it too.
  One person posted on this subject at 08:47.
  Another saw the same at 12:47.
  Still another view at 13:11.
  Finally, someone saw that he was no longer a problem at 13:21, and I can confirm that it is indeed fixed.
  Thanks to all those who may have alerted the team WU.

• Disable the upgrade to the latest version of Windows through Windows Update.

  I am running Windows 7 Home version.

  In Windows Update, how do I remove the upgrade option to Windows 10?

  Thank you!

  Hello

  What you need to do here first, is to change the way you receive updates. The automatic updates enabled, the operating system will reinstall the nagware guest who is KB3035583 after uninstalling a step we will take in a minute.

  Then follow these steps:

  1. Right-click the icon of the center of the Action on the taskbar and go to "Windows Update".
  2. In the left menu, click on "change settings".
  3. Change automatic updates to "download updates but let me choose whether to install them".
  4. Click "Save Changes", then "Control Panel Home".
  5. Go to "Programs and features" and click on the link "View installed updates".
  6. Copy and paste KB3035583 in the high-field search right and when it appears below, right click and select "Uninstall". It's a great Setup uninstall can last several minutes.
  7. Then restart and then go back to Windows Update again.
  8. Since you now have different parameters of WU, click on the link if there is no waiting for your approval, which will bring you to the menu where you can decide what to install.
  9. If you see KB3035583 in the list, right click and select "hide update". The box you should checkmark to select an update will turn gray and when you exit WU, these files will be sent in the repository called "Restore hidden updates". You can restore the updates that have been hidden there at any time by clicking on the link, make your selection and click "restore".

  The next step is to edit a registry that will prevent Windows 10 download and installation.

  Press the Windows key + R to start the command run, type: regedit , and then click OK.

  Navigate to: HKEY_LOCAL_MACHINE--> SOFTWARE--> Microsoft-->--> CurrentVersion--> WindowsUpdate Windows--> AutoUpdate--> OSUpgrade

  Click the OSUpgrade key (which looks like a folder), and then in the right pane you should be able to see the four values respectively called:

  AllowOSUpgrade

  KickoffDownload

  KickoffSource

  OSUpgradeInteractive

  Part or all of them will have a value of 1. You need to change those to 0 as you see in the screenshot.

  

  To change a registry value, right-click and go to Edit. In the value field below, transform figure 1 0 a

  Click OK and Windows will add the 0x00000000 (0) itself.

  If it's already a 0 then you don't have to touch it.

  In addition, you must create a value. To do this, right-click on an empty part of the right pane, and then choose new DWORD with the name DisableOSUpgrade-->.  Windows will add REG_ DWORD early, after it is created.

  If inadvertently, you lose the highlight when you create the new value, right click and select Rename.

  Then, right-click of your new value and go to edit. Change the 0 value in a 1 in the value field. Click OK to confirm and exit.

  Reboot, then go to Windows updates. You will now be able to install updates 8.1 without being hassled by Windows 10.

  Credits:Xircal , from here