Will not activate the touchpad on Satellite A300-1I4

Similar Questions

• How to activate the touchpad on Satellite A75

  I accidently turned off my Touch Pad on my Toshiba Satellite A75. Of course, this won't work - anyone can help me with the command to activate the touchpad.

  Thank you

  Sue

  How do disable you the touchpad?
  Have you used a combination of FN keys?

  Try to reverse this order using the FN + F9 key

• XP Pro SP3 programs fax everything works except will not activate the modem.

  All the routines of fax machine worked correctly in the past, BUT without warning (which was checked and working properly) the modem is more will not activate when the fax software is responsible for sending the message.  I was not able to find hardware problems and even after removing and reinstalling the MS fax routines the modem will not activate.  Would appreciate any ideas about the solution.  Thank you.

  It is probably not the modem firmware, although it could be that the modem driver is corrupted.  In both cases, however, a visit to the site of the manufacturer of the modem is in order.

  Exactly how did you determine that the modem is working properly?
  Have you looked in the Device Manager?
  Have you used the 'button interrogate modem' tab of the property sheet for the modem ' Diagnostic'?
  Have you tested a data connection using HyperTerminal?  If you do not know the phone number of a "Bulletin Board" (apparently some of these still exist) or the IP address of a server telnet, just to open HyperTerminal and see if you can dial any phone other than the line number to which your modem is connected.

  Thank you for your understanding, PML.  I had used all of the tools you mentioned EXCEPT try another modem program!  HyperTerminal doesn't activate the modem, the feature has been confirmed.  I also had a problem with the new creation of file and folder (program installs, etc) setting not permissions to a level of total control of my identifying specifically used (Admin level) which, of course, can cause certain issused orders either by keyboard or input to fail (often with no indication of the cause of failure) program.  Realizing that this situation might be involved with the problem of the fax modem that I started to study the folders and files that are used by the routines of MS Fax.  A lot of the files/folders did not the permissions defined by giving total control of my ID so I adjusted the.  The modem is now triggered by the routine of fax!  Thanks for making me think a bit out of the box (at least my usual box) and providing the index (another modem using program to test the feature running) problems.

  Now if I can only figure out why (or what has changed in my system) which causes the folder/file creation process in Blons class "Admin" from my user and privileges not setting high enough!  GG

• Z930 protected - will not disable the Touchpad

  Hello world

  Thanks in advance for your help. I have a laptop Toshiba protégé Z930.
  The button above the Tablet (built in mouse on the laptop) which usually disables the touchpad no longer works.

  This is why I can not disable the touchpad. Also function F9 or turn off the touchpad.
  This makes me think that it's a software problem. I updated the driver, and nothing has changed.

  Someone knows how to fix this?

  Thank you!

  Hello

  Could you give more details about your problem?

  For example: what Windows system do you use?
  Other FN keys work correctly?
  This driver updated you exactly?

  Have you tried to reinstall the Package added on the value of the Toshiba (for Win 7)?
  This package contains a few pilots required and tools that control different functions for laptop.
  So next to the touchpad driver installation, this package should be installed / updated also.

• Once my hard drive crashed and had to be replaced, Adobe will not activate the copy of Photoshop on the same machine, on what it was originally.  I paid for it, why can I not use it?

  I've been buying and using Adobe Photoshop through many versions over the past decades. and I used to recommend it whenever I had the opportunity. Now I would not recommend it to my worst enemy.  I could say much more that this, using my parents taught me to not use words.

  Now, Adobe has their head in the clouds and does not care one iota of loyal customers.

  I had CS3 on a CS4 on another and CS6 on another machine. The hard drive on the machine with CS3 and had to be replaced.  I am trying to reinstall CS3 on the same computer, but Adobe won't let me activate it, even if I'm putting it on the computer, on which he was originally.  I paid for it, I went by the rules, and Adobe will not even for me.  And as far as I know, Adobe is released so far in the clouds has nothing but contempt for people who kept them in business for decades.

  What I would really like to do, it of pass the machine that originally had on that CS3 and CS3, put on the machine which has now the CS4 CS4, but I guess no one at Adobe case what I would like, even if I pay for the software and I have no intend to try to have it installed on more than one machine at a time.

  A disgruntled FORMER Adobe customer.

  1. R.G. Dean

  See the help of Activation & deactivation and follow the links, so you can disable your CS3 (via chat). Be sure to have your serial number available. Then you should be able to activate on the new drive.

• Win Office Enterprise 2007 will not activate the version pre installed on Toshiba NB305.

  Bought Win Office Enterprise 2007 in April 2007, by Student Media Applications (at U Illinois Champaign, rather than student computer) and it won't let me activate the version that came with my Toshiba NB 305 netbook. How can I activate it. I mean when I repeatedly to enter the key correctly, it says that it is incorrect. Thank you.

  Hello Dave108,

  Thanks for posting on the Microsoft answers Forum.

  Please see the information on the link from Microsoft Office, on how to install on a netbook.
  But you will need to uninstall the trial version of the Office of your netbook. Then you will have
  be able to activate your copy of the retail sales.

  I hope this helps.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sound sound record play will not activate the sound

  the icon of audio on the screen and on my computer are cut and every time I press on it is not turn the sound back on. What should I do?

  Hello

  I see that you are unable to reactivate sound.

  Do not worry! I'm here to help.

  You did changes to the computer before the show?

  Let's try the following and check if it works:

  Method 1:

  You can run the troubleshooter Audio playing & check if this solves problems.

  Open the troubleshooting of Audio playback

  Method 2:

  You can try to download & install the latest drivers for sound card on the manufacturing site & check if the problem persists.

  Reference: update a hardware driver that is not working properly

  Hope the helps of information. Please post back and we do know.

  If you need assistance regarding Windows please keep us informed.

• IPhone unlocked 6 works on all carriers of the United Kingdom, but will not activate on mobile of delight that use EE network sim works in my 4S but 6 says not found carrier shows 3 bar on signal but will not activate the phone?

  uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?

  any help appreciated MikeC

  Contact the carrier. In all cases the pleasure is not a carrier official iPhone.

• Can not activate the WLan on Satellite L350D

  First of all, sorry for my bad English

  I'm having problems with the WIFI, I fail to enable it to connect to a wireless router and be able to connect to the internet

  Computers icon is green: if I choose: to built a connection or net and then I choose to connect to a router or wireless access point, I hit 'next' and then he said: "hardware detection and configuration of the net ' and then he said 'Windows don't detect any material NET Wireless' and he said ' to create a net wireless and flash configuration keeps in a usb unit»

  In the blue icon of a computer and like a ball behind: there is a screen called CONFIGFREE.

  If I press the 'radar' it says "this device net wireless is disabled." Enable the device"and if I touch" doctor conectivity, in ' "rolling / wan wireles ' State of the switch is enabled and the firewall is disabled.»

  But then, in the design, although it has two arrows. Blue disconnects and if I change the profile, it is said that the wire is not available and the realtek fast ethernet is available.

  Hello

  Your description is a bit confusing.
  So here are my Tips how to connect the laptop for WiFi using the Vista operating system.

  First check if your WiFi is turned on. You must use the key FN + F8 to go tot eh card WLan and then turn on the WLan switch on the side of the laptop.

  According to your WiFi (Atheros or Intel) card I advise to use a WLan configuration as Atheros Client Utility or Intel ProSet Utility tool.

  You can use these tools to configure WLan. I use one of these tools and I can connect and configure the WiFi network very easily.

  If you want to use the Vista WLan own configuration options, can access the network locations and right click on the WiFi connection.
  Choose then rebuilt Waln connection or something like that.
  Then choose your WLan which has been configured on the router WLan and put the right encryption settings and you should be able to connect to you wirelessly.

  Good bye

• Why Ms service pack 2 for windows vista will not activate the sd card reader work?

  I tried to read a card to 8 GB using my laptop built in card reader, I found a solution for vista o/s before sp 1 and 2.  Certainly, there is a fix for sp2 computers now?

  Checked on the net and a lot of people may not read their 4 Gb + SD card, especially on laptops.  My implementation, laptop of Acer 9423wsmi, OS Vista, with Texas Instruments PCIxx12 Cardbus Controller.  I just downloaded and installed sp43509 driver from the site Web of Hewlett Packard and Lo, now I can read my 8 GB card!

  I tried to read during the last two years, so your response inspired me to find a solution, even though you did not actually provide a solution yourself.

• Satellite C850-1F2 - cannot activate the touchpad

  Hello

  Recently, I installed Windows 7 on my C850-1F2. For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard. After that, the installation went well and I subsequently installed all drivers (downloaded from Toshiba) manually correspondents.

  All devices can be installed and work properly - with the exception of the touchpad.
  If I re-enable the touchpad in the BIOS, Windows will not start. It just stops at 'Starting Windows' screen - not the gel (continuous loop animation), it will not simply continue. Starting in safe mode, it will also stop after loading all the drivers. I've had the laptop that works all night to see if I was just being too impatient, but nothing helps.

  Also, the system does not detect the touchpad. Manager devices displays only the USB mouse, that I have connected or anything. When you access the parameters of 'Mouse', the system will first ask me if I want to uninstall the Synaptics drivers. I have thus tried to reinstall the Toshiba and the generic Synaptics driver but no touchpad.

  If I use FN + F5 to activate the touchpad (while it is already disabled in the BIOS), I simply disable the keyboard. The touchpad does not work. However, I have to disable it again, then put the laptop to sleep and it wakes again so that the keyboard works again.
  Furthermore, if I reboot after using the fn + f5, again, the touchpad is enabled in the BIOS and Windows does not start.

  I'm really confused at this point. What Miss me?

  > For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard.
  I installed Win7 several times but I never heard of something like this and I've always installed when moved the BIOS default settings so I put t understand this theory and does not understand why you did that.

  In any case, if nothing works well I highly recommend to upgrade the BIOS to the default settings and then install the clean version of Win7. I hope you are using Microsoft original installation disc and not some self made things.

  I put t think that there is a magic trick that can solve your problem.

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• Satellite A350: Highlight text, and then delete or BACKSPACE will not erase the text

  I have a new Satellite A350. When I surligner highlight the text, then try to remove or back up it will not delete the text. This happens in the line URL, Windows Mail and Word.

  The key SUPPR and button both work individually, but I'm used to being able to select lines of text, and then type on (or pressing delelte) it to disappear.

  Now I can not delete text except by backspacing of the text.
  Y at - it a setting I can change or is this a problem with the laptop?

  Thank you

  Hmm, I had the same problem in Word from MS Office.
  I solved this problem by using this work around:

  -In the menu bar, select Tools, Options and then on the Edit tab.
  -Click the box called "Typing replaces selection" sub + mounting options + and then click OK.

  Check if that helps.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite A300D - how to activate the touchpad?

  Hello world. I have a problem.

  When I used XP I turned off touchpad while I use the mouse. So I decided to install Win Vista and there is a problem. I forgot to activate it before reinstaling. This is why my touchpad does not work. The drivers are fine and I tried to reinstall, but it did not help. Everything works fine except that I can't turn on the touchpad.

  Any ideas how to do this?

  Thanks in advance

  Have you installed Vista using Toshiba DVD upgraders?
  The mouse works if you use an external mouse?

  When you install Vista with the recovery image you factory again and touchpad is not disabled by default. Check the FN + F9 option and do not forget the touchpad is not disabled.