Will not be displayed in Windows Explorer (16 GB SanDisk 45Mo/sec Class 10)

Similar Questions

• SSD will not be displayed in Windows install

  I tried to install Windows on my new M4 of Crucial 64 GB SSD. The drive works and comes in workstation: http://puu.sh/1EE5c

  Everytime I open the Windows installation program and access the screen when I choose where I want to install the player, my SSD does not appear. I tried to unplug the other harddrive, starting from my hard drive instead, nothing works.

  I'm on a laptop ASUS G73JW with a (HM55) Intel chipset in AHCI mode. I have only 2 SATA ports available because it is a laptop and none of them display the player under Setup.

  I posted this question everywhere and tried Google, nothing helps me at all.

  Follow the link that has the same thing:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-installer-will-not-recognize-SSD/80a83aed-56dc-438C-a65e-a0ea815ce551

• external hard drive will not be displayed on windows xp

  I plug a Thecus 56 GB of external hard drive, and even if the computer will beep I can't find the hard drive anywhere. It works on my Dell laptop, which is also Windows XP

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Media Guide will not be displayed in Windows Media Player 12

  Just bought a new laptop with pre-installed Windows 7 Home Premium. My problem is I can't select the "Media Guide WMP 12". In the list on the left side pane, there is an option to select "Online stores", but the button next to it that is supposed to change it to "Media Guide" does not respond to mouse clicks.

  Please help as I am unable to stream internet radio and any other content because of this.

  Start Windows in clean boot mode and try there. Do you have the same problem?

  Try temporarily disabling your firewall and check if that helps.

  What happens when you use IE to go to http://onlinestores.metaservices.microsoft.com ? You should get a 403 error (access denied).

  Tim Baets
  http://www.BM-productions.TK

• TOSHIIBA external hard drive will not be displayed in "My computer" (Windows 7)

  Several months ago, I bought a Toshiba external hard drive and used to back up my laptop.  I have not used since then, but needed to recover a lost file today.  Unfortunately, when I plug the external hard drive, it will not be displayed in my computer.  When I connect, I get the sound that makes Windows when connect you something.  The hard drive turns on and I can feel it running.  But it does not appear in my computer.  If I go into the Device Manager and look under ' hard drives it appears as "USB device external Toshiba 3.0."  When it is offline, it does not appear in the list of disk drives in Device Manager.

  Advice how I can get to appear in 'My Computer' so I can actually access the files?  Thank you!

  Hello

  This problem may be caused by one of the following:

  (a) your player does not have a drive letter assigned in disk management

  (b) the drive may be disabled or offline

  (c) your USB driver is maybe corrupted

  Follow the steps in this Microsoft KB article troubleshooting and check if that helps:

  My drive does not appear in Windows Explorer

  https://support.Microsoft.com/kb/330140/en-us

  Registry warning

  
  

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  Also see this Toshiba support link:

  How to: Troubleshoot USB issues in Windows 8, Windows 7 and Windows Vista

  http://forums.Toshiba.com/T5/computer-troubleshooting/how-to-fix-USB-problems-in-Windows-8-Windows-7-and-Windows-Vista/Ta-p/283727

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• New folder is not visible inside my project, but displays in Windows Explorer.

  I created a new folder in another folder.  The new folder is not visible inside my project, but displays in Windows Explorer.  Also, if I try to add another folder of the same name, it rejects the action from the folder (although invisible) already exists.  My colleague can access the same file (on a drive to share) and see the new folder very well.  This error occurs if I was the only one to create the new folder or it is the creation of the new folder.  I'm new to RoboHelp and she has used it for years.  I suspect that something is not yet set towards the top right of my side.  Ideas? (I thought I posted this yesterday, but I can't find it anywhere)

  Thanks to you two.  I created the folder inside RoboHelp (9).  I didn't know about the show empty folders option, but thanks to you, I do now!  I ended up contact the Adobe Support and they had me finally get into the registry and rename the folder RoboHelp to make things.  It worked, but update the registers is not my favorite way of managing problems.

• Properties of a PDF document will not be displayed

  In Windows Explorer when I click on properties of document in the drop-down list to a file, ALL my PDF files lack the document properties.  I deleted and re-installed my Adobe Acrobat 8 Standard, but the properties are still reported missing.  Adobe says that there is nothing wrong with my Acrobat installation because the properties appear in the Acrobat program.  They just will not be displayed in a window of Windows Explorer.  I need to be able to see the document properties, then, how can I fix.  I can't insert to attach jpg showing what I mean.

  Hello

  ·        What exactly happens when you try to run the system scan, you get an error message? What is the exact error message?

  Method 1:

  You can create a password for your account and then checks to see if you are able to run the SFC scan on the system. Follow the following steps to create a password for your account.

  a. Click Start, and click Control Panel.

  b. click on user account and click on your username.

  c. click on create the password and create a password and check if you're able to run the analysis.

  Method 2:

  I suggest to create a new user account and check if the problem persists. Follow the steps mentioned in the article below.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• iPod touch 6th generation will not be displayed in itunes

  So I got an ipod touch 6th generation, brand new today. I have a bunch of songs on my computer I want to put on it, but the ipod will not be displayed in itunes.

  I'm on Windows 10, the latest version of itunes and I tried to restart the ipod and the computer several times in order to put in place. I deleted the apple driver put it into every usb port, reset all warnings dialog, I reset the iPod and deleted everything and started around and still nothing.

  I think that the problem lies in the fact that I was not prompted to trust the computer. I think I could have been, but the text was gone too fast so I don't know if I clicked on Yes or no. Does anyone have an idea what to do?

  iTunes: fix iPhone or iPod not detected Windows 10

  See

  iPhone, iPad, or iPod not recognized in iTunes for Windows

  -I would like to start by

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  or

  Remove and then reinstall iTunes and other components of software for Windows Vista, Windows 7 or Windows 8

  -New cable and another USB port

  -Run this and see if the help of results to determine the cause

  iTunes for Windows: test synchronization Device

  See also:

  iPod not recognized by iTunes in windows

  Troubleshooting problems with iTunes for Windows updates

  -Try on another computer to help determine if a computer problem or iPod

  Maybe:

  http://www.igeeksblog.com/accidentally-clicked-Don ' t-trust-iphoneipad-cancellation.

• When I go on animate / flash it will not timeline display

  Hello

  I opened the flash and the tool and the timeline bar will not be displayed. I tried pressing Windows and access it from there, but when you click nothing happens. I can open my work but make no changes. I then updated to animate I was wondering if that would allow to settle, but it obviously didn't.

  any advice would be great

  Kirsty

  Have you tried resetting the workspace? (Window-> workspace-> choose a)

• I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• My programs on the creative cloud will not be displayed in the extensions Manager.

  Hi I am trying to install an extension for Flash, but it will not be displayed in my extensions Manager and will be one of my other programs.

  I try to install the image key Caddy Pro extension and it says to go to Windows-> Extensions-> keyframe Caddy, but I couldn't find where it says to install it manually with the extensions Manager.

  Here is a picture of my extensions Manager:

  

  And this is a picture of my creative cloud:

  

  Is there a way to make my programs appear?

  Thank you, Christian

  Dear Christian

  It should not be used today. Please see this link: Adobe Exchange

• Apple TV will not be displayed as home hub in iOS iPhone app House 10

  I'm trying to set up the AppleTV 4th gen to act as a drop-in centre, but it will not be displayed in the home of the iPhone app.

  Both devices use the same iCloud, tried a disconnection and returned but nothing, two-factor authentication is activate, location is enabled, iOS are both updated with even wifi link...

  Also, I checked in my apple ID page and all devices appear correctly, but I can't understand why the Apple TV is not recognized by iPhone kit home.

  Any help appreciated

  Dave

  I have the same problem.  A ran the same traps you.  2 factor auth active.  Sign in and out icloud.  No luck.  Can activate ipad like home but 4th gen apple tv hub will not simply act as the hub.  Under settings, accounts, icloud... no homekit option available.

• iPhone will not be displayed in the finder

  I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

  Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.