Willy Introscope in Windows Server 2008 R2 Instalation problem

Similar Questions

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• T61 4 GB RAM on Windows Server 2008 64 bit problems

  Hi, I just bought 2 * 2 GB Crucial PC5300 667 Mhz memory to upgrade my T61 that has 2 * 1 GB installed before. Hardware installation is smooth and easy, I followed all the steps in the maintenance manual. Then I restart the computer, BIOS can recognize that it has 4096MB ram installled. My operating system is Windows Server 2008 Enterprise 64-bit, which, unlike these 32-bit system, I am sure that it can handle more than 3 GB of memory. It is found in the system, and and showed there is 4 GB of memory, but in other programs like Everest, CPU - z, or Photoshop, even in the task manager all told me that there are only 2 GB of memory.

  I was confused and thinking that it might be the Crucial problem of the new memory, then I install only a SINGLE memory of 2GB each time. They can enter the system and be recognized as 2 GB. So the new Crucial memories have no problem. Then I combined the old 1 GB memory and new 2 GB Crucial memory to boot. Windows can also recognize 3 GB ram but only 2 GB of it can be used.

  It seems that 2 GB is the threshold of this system, any combination of greater than 2 GB can be recognized but cannot be used. However, it should not be like this since Windows Server 64-bit, theratically it can manage more than 512 GB of memory. That's happened? What should I do to remove this threshold? Windows problems? T61 problem.

  BTW, I've updated the BIOS of the laptop to the latest version. 01/07/2008

  This is the snapshot of the screen, my Windows is the Chinese version, but the crucial information is in English.

  http://farm3.static.Flickr.com/2194/2949357419_857717624d_o.jpg

  How dramatic is... It seems that I can use all 4 GB right now. I made a few changes and changes of the last

  Boot, however I don't know that we are contributing to the problem.

  During the last closure, I

  (1) switched the 2 Crucial memory slot,

  (2) put on the battery (it has been disconnected since the first time I changed the memory).

  (3) disabled windows virtual memory (now my laptop only works on real RAM, Yes...)

  something like this works now, thank you wjli2!

• Installation of Windows Server 2008 R2 SP1 problems

  Since the recent release of Windows Server 2008 R2 SP1, I have since downloaded the ISO from Microsoft (SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO) and tried to install it on my sandbox (ESXi 4.1.0 260247) and I will have questions.

  The problem is that Windows does not have a driver for the SCSI controller device.  I tried to change the type of "LSI Logic SAS' to 'LSI Logic" parallel "and it does not solve the problem.  I tried to download a Windows 2008 LSI SAS of LSI driver directly (http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html) and use it, and still have had no luck.

  I was wondering if anyone has had any success in installing Windows 2008 R2 SP1 on ESX or ESXi 4.0 or 4.1?

  

  See you soon,.

  Ken

  Hi Ken

  It is the same as the previous one:

  SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO

  concerning

  Pieter

• Windows Server 2008 - advanced sharing problems

  Hello

  I maintain a small server of Windows for a laboratory on a College campus, and we currently meet a few mistakes when you share a folder called 'students '. We use advanced permissions to share the folder with the name of 'students' shared network It worked for months, but now students are no longer able to access the folder. The permissions are correct, and by another action called "students2" (pointing to the same folder on the server with the same permissions), it worked. My question is, what would cause the inaccessible original share (show on the network, but deny access) to the groups of users who need access? Thank you for your time, I look forward to your responses.

  Gareth

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• 0xc000000f \Windows\system32\ntkrnlpa.exe kernel is missing or corrupt - windows server 2008 r2

  After restoring the Windows partition boot flag, I got:

  0xc000000f

  \Windows\system32\ntkrnlpa.exe

  kernel is missing or damaged.

  I use Windows Server 2008 R2 installed on 70 GB primary partition & active with appropriate MBR.  It is not the consumer - it is installed on the laptop.  After the repair broken BCD (Windows 7 installation DVD, DVD server doesn't have this tool :() this problem.) I know that this (ntkrnlpa.exe) file does not exist, and it should not. System could not start any mode (even Safe Mode base).

  The disc is perhaps the problem because PARAGON Hard Disk Manager 2011 has problems with the editing of this partition but it it sails well (as other tools). The files seems good. Also, CHKDSK has not found no serious problems such as bad sectors - it fixed only tiny problems.

  What should I do?

  Hello

  I suggest you to post the question in the forum below and check if it helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen

  It will be useful.

• If we have 2012 window microsoft license server can then we able to install Windows server 2008

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I bought windows server 2008 R2 standard and Enterprise edition to install incorrectly, how do I activate windows?

  I bought windows server 2008 R2 standard and Enterprise edition to install incorrectly, how do I activate windows?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How should I / can I install Windows 8 policies on a Windows Server 2008 system.

  Hello

  I am currently working on a customer's server that is running Windows Server 2008 R2. They are trying to upgrade their machines to Windows 8.

  The problem they have is that they don't want all the extra tiles on metro screen, so I exported a model of how they want it to look. The problem I have at the minute is to install Group Policy settings 8 windows on their server, so that I can put the filter pattern of departure for all machines in the domain.

  How to properly install Windows 8 strategies on the system? I downloaded them as files admx on the MS site ready to go, but it is not as simple as I thought.

  Thanks in advance,

  Kaelan. IARC - Smith

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• When installing ha6 on windows server 2008 R2 compatibility issue

  Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

  I tried the steps below:
  1. right click on "setup.exe" and select "Run as Administrator"
  2. run in compatibility mode, such as windows XP sp2.
  It does not, someone who can help on this? Thank you!

  Hi Weihe,

  The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

  Hello.

  I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

  I use the 32-bit version of Windows Server 2008 in thw.

  Hello

  You can view this issue in this help link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• Install Windows server 2008 r2 blue screens before

  I try to install windows server 2008 r2 on my system and it blue screens right after that the disc is loaded in the ram.  I don't not even to the selection of installation phase. It crashes just after the windows logo charge. IM receives the stop error 0x0000001e.

  my system is as follows
  Asus rog crosshair iv formula
  processor AMD 1100 t blacke edition x 6
  16 GB of ram
  ATI radeon hd 6950 graphics card
  and several discs hard digital western
  If someone has a possible solution to this problem would be great because I won't have a chance to make it work. Windows 7, it works, boots and install perfectly on this machine, but I need to put the server on it.

  Hello

  Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel