Win 10 for C30 driver matrix

Similar Questions

• Win 7 USB controller driver for Pavilion 500 - 217

  Hello, I recently spent again PC of my mother to win 8 for Win 7 64 bit. I can't either driver (Intel or AMD) crystallized under drivers available for the controller USB to work. The hardware ID is PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03. I also need a driver for the SM Bus controller unless the driver of the usb controller works for both.

  I should be grateful if you would help.

  Thank you...

  Hello:

  Install the AMD Chipset Driver and restart.  You want to download the chipset 49.7 MB file.

  Who should install the two devices.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If it does not install the USB 3 controllers, please install both of these drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• HP elitebook 840 g3: need driver Win PE for hp elitebook 840 g3

  Hello

  I need driver Win PE for hp elitebook 840 g3.

  I download ftp://ftp.hp.com/pub/softpaq/sp73001-73500/sp73204.exe

  But I don't have the driver of WinPE.

  Where I can finf them?

  Thank you

  HP Windows PE 3.0 Client x 86 and x 64 package driver

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/SoftPaq/WinPE3.html

  64 bit

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KEKB2\Flat\Win7-x64\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KGXB2\Flat\E1D\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00JPKB2\Drivers\E1D62x64.inf

  32 bit

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KEKB2\Flat\Win7-32\E1D6232. INF

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KGTB2\Flat\E1D\E1D6232. INF

• WIN 7 32 BIT DRIVER CHART FOR PAVILION DV9823CL

  I DON'T THINK WIN 7 32 BIT DRIVER CHART FOR PAVILION DV9823CL

  Hello

  You can try the driver from the following link.

  http://laptopvideo2go.com/NVIDIA/195series/19581_win7x32.exe

  Kind regards

  DP - K

• Please help find the driver win 7 for sharp AM-400 MFP

  I have Windows XP driver for my Sharp AM - 400 multifunction printer. I tried to install it in different compatibility mode to work on win 7 but without success.  Please help find the driver win 7 for sharp AM-400 MFP. Regarding the LEP

  Think that its too old. I think its time to get another printer

• I can't connect Photoshop Elements 10 for canoscan lide 110 with win 7(64 bit) driver

  Hello I recently bought Photoshop Elements 10, so that I can have the Photoshop Elements program compatible with win 7(64 bit)

  I installed Photoshop Elements 10 (Spanish edition) and apart from the scanner seems to question, it works well. But when I had searched and found a win 7 (64-bit) driver scanner STILL does well with Photoshop elements 10. Sound so much, that I've got an old pc from xp win with Photoshop Elements 5 and it works perfectly, but I bought a second and more recent laptop with win 7 Home Premium (64-bit), when I install the driver, windows shows, that its been installed correctly, but when I want to open driver (scanner) in Photoshop elements 10 y NO LINK TO OPEN IT!

  Please see the 2 attachments, where you can see, there is a link in Photoshop elements 5, but WITHOUT LINK in Photoshop elements 10. What is the problem, I really do not know? In both cases, I installed ONLY scanning-gear not a pilot program called Navigator canon, and I don't want that and don't think its necessary. When working in the old 5 elements with scan-gear driver only, it must be the same in 10 things I guess. Someone has a bright idea, and can you help me? I would be very grateful.

  

  You just install the plugin from Twain for the EP 10, since it is not installed by default as if it were in ESP 5.

  https://helpx.Adobe.com/Photoshop-elements/KB/TWAIN-installed-Photoshop-elements-11.html

• Win 7 / T500: no driver for Serial Port PCI

  I have what I think it's all Lenovo installed software after an upgrade to Windows 7. This includes the touchpad and Intel AMT drivers. However, I show still no drivers for "PCI Serial Port" in my device manager.

  No idea how to solve this problem of exceptional pilot?

  Thank you!

  _Bruce_

  The manufacturer is Intel and here is the link for the driver you need:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-73567

  I think that you just install this driver in case you have Intel AMT active. If Intel AMT is disabled I do not think that this device will be shown in Windows.

• Satellite A100 can't find Win 7 ATI display driver

  Hello

  For my toshiba satellite A100, I can't find the Windows 7 ATI display driver.

  Please help me. As your site we choose the A100 product type and OS win 7 it will display no driver for him, only the driver wireless lan.

  Please check and advice.
  Regarding the Satellite A300, the driver is available but it is Intel Dual Core and the A100 is Pentium Dual Core.

  Please check and advice.

  Thank you.

  Hello

  As much as I know page driver Toshiba UE does not all drivers Win 7 for Satellite A100 series. you need get the graphics driver from some other 3rd party pages

  What A100-xxx you have exactly and what graphics card does support the laptop?

• Re: Need to win 7 for my L750 Pro Satellite recovery disk

  Hi all

  Could someone tell me where to download or get a copy of the OEM Win 7 for my L750 Pro Satellite recovery disk? The laptop has a new HARD drive without a job recovery partition and I don't have the recovery CD.

  Help please.

  > If you have not done some recovery disks, toshiba very kindly will give you some... for $66!
  Of my knowledge in Europe you can get it for 30

  However, as you say, there is an option to create recovery disk _For free_ and this must be done on the first day of the purchase. In case something goes wrong with the HARD drive, you can use these recovery disks to reinstall the _For free_ system.

  By the way: the license at the bottom of the device key belongs to the version of Windows OEM preinstalled on your laptop. Its share of the recovery image.

• Search for USB driver for Satellite Pro 460 CDT

  I own an old Satellite Pro 460 CDT including enhanced Port Replicator III (P1, 166 MHz), installed is Windows 2000 SP 4.

  Manager device shows me there is a problem with the USB controllers, there is an "unsupported NEC USB-to-PCI-Openhost-Controller", the driver has not been installed by Windows. Uninstall and new material research will not change anything.

  USB is necessary for the intended use.

  Then, is less for a driver job?

  Hi, Ralf

  Problem is that this device is not supported for Win 2000 and load on the Toshiba download page, you will not find anything. I know, this unit is about 10 years old and I think you expect a little too much of this good old classic.

  If you want to use with a maximum and preinstalled well performance install support OS Win 95. For Win 95, you will find all the drivers and tools on Toshiba download page.

• BIOS update failed - where can I download BIOS for floppy drive?

  Hello

  After the BIOS update fail by Windows I need to reflash.

  Where can I download the bios for floppy drive files '?

  Thanx

  Hello

  Update of the traditional BIOS cannot be downloaded.
  Only focused on winning BIOS is available on the European driver Toshiba page.

  In your case, you will need to contact a local ASP.
  The technician can help you and able to reflash the BIOS using a disc of crisis of the BIOS.

  Good luck

• a6560t usbstor.sys win-7 64-bit driver

  It was initially a 32-bit Vista system. A few years ago, that I've updated for Win - 7 64-bit with Microsoft upgrade DVD. A few months after apply a Microsoft Update, it crashed. I couldn't go back. Then I tried to get reinstalled Win - 7. The installation is not complete. It happens to prepare it for the customization of the user screen (something like that) and restarts. I enabled boot logging and the latest driver to load was the USBSTOR. SYS driver. So what I've seen, it's that I need to replace the driver for Win - 7 by default. Any help for this driver would be greatly appreciated.

  HP Pavilion A6560T. KZ852AV prod # #ABA

  Thank you.

  Hello @Topcat-17.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you're looking to update your drivers on your desktop PC HP Pavilion a6560t CTO to other than the default Windows 7 drivers. Unfortunately, there are no Windows 7 drivers for your computer other than the default drivers available for your HP computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Run CHKDSK /F to check for hard drive corruption. STOP: 0x0000007B__Blue screen

  I have a Vista 64 bit OS.  I tried to do a system restore to the last checkpoint to interrupt a Service Pack.  Restore failed (don't remember exact error), now when I try to boot Vista, I get a message saying to run CHKDSK /F to check for hard drive corruption.  STOP: 0X0000007B
  My questions are:
  (1) do I need Vista recovery CD in order to enter the menu advanced at this stage startup options?
  (2) if I decide to upgrade to Windows 7 now, made the stop: 0x0000007B have a problem with that?  or could I fall in Windows 7?
  Vista 64 gave me many problems and I think its time to make him... Thanks in advance... Mark

  Hi Markgod5,

  Thank you for visiting Microsoft Answers.

  It seems that the hard drive is damaged if we get this error message to running chkdsk.

  You can start the computer in safe mode with command prompt and see if you can start.  Then run the chkdsk command.

  To do this follow these steps:

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  (d) use the up/down arrow keys to select Safe mode with command prompt.

  (e) in the command prompt window, type the following command and press enter Chkdsk /R and Chkdsk /F

  Using recovery DVDs, you cannot switch mode winRE (Windows Recovery Environment) to run chkdsk. You need DVD full version (Win 7/Vista) or Vista repair disk.

  You probably won't be able to install win 7 because the problem is with the hard drive and chkdsk should be run for the error.

  Hope the helps of information. Please post back and we do know.
  Joel S

• help for 'compress drive c to save space' [or another similar term]. I continue to experience an error trying to post here, so please bear with me [frustrated!]

  recently, I tried to win more space for my drive almost full c.  somehow, I came across an option to compress the drive.  He showed that he would take an extremely long time, so after I started, I thought that I have would end at a later date.  Well, I have been unable to get back to where I left off-in fact, I can't for the life of find me.  all the research developed '0 results '.  help and support has been no help - I'm so frustrated that I don't know what to do!  can anyone help?  PLEASE?  I'm not computer illiterate by any stretch of the imagination, but am out of resources here...

  First thing first: DO NOT compress any drive.

  Here's a tutorial for you to shoes:
  1 disk cleanup (from step #1 to #11)
  2 remove all except the most recent restore points (starting from step #12).

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  That must be restored a lot of disk space fpr you.

  t-4-2

• questions about the decommissioning of win 8 for Win 7

  I plan to install Win 7 Pro on my Win 8.1 on my desktop computer. My computer came preloaded with Win 8 and then I upgraded to win 8.1 by using Windows Update in Control Panel. So I have the computer manufacturers 64 bit Win 8 Support disc that came with the computer, but no Win 8.1 disk. I also have my old drive for Win 7 64-bit. My main concerns regard the problems potential decommissioning and also possible future problems if I decide to come back to Win 8 (regardless of the version then in force).

  I have two questions:

  (a) there will be problems if I decide in the future to upgrade Windows 7 Pro to whatever the current version to win 8 given that I only have my Win 8 of the manufacturer of the computer drive?

  (b) in addition to needing all the drivers for Win 7, are there other problems by going win 8 for Win 7?

  If you want to downgrade to Windows 7.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer.

  If there are native drivers for Windows 7, there should be a problem.

  Prior to decommissioning, I highly recommend facility backup the Windows 8.1 currently on the disk, so if you decide to go back to Windows 8, you can simply save your data in Windows 7 and restore the image of Windows 8.1. Learn how to:

  How to create the System Image in Windows 8.1

  Decommissioning:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp