Win 10 "threshold 2' very strong use of the processor by process"system and compressed memory.

I did a clean install of Windows 10 threshold 2 (aka version 1511) on my MBP 15 "2015 and I encountered a problem. Well two actually:

1. installing the Realtek driver hangs when you install the software in support of BC. This is easily fixed by killing the process RealtekSetup.exe.

2. the process of "system memory and compressed" now use constantly one of the eight nuclei which ruins the life of the battery. I had to actually change the power management in Windows to allow the CPU to only go to the maximum frequency of 60%.

Some research on Google, I have gathered many suffer from this problem on other brands and it is usually linked to a bad driver. I was not able to find the culprit yet unfortunately.

Now, here's my question: did someone suffering from this issue as well and if so, where you be able to solve it?

Thank you!


Try / sleep or hibernation.

Tags: Windows Software

Similar Questions

  • Very heavy use of the processor because werfault.exe

    My machine is extremely slow due to werfault.exe.  Manager tasks shows the use of the CPU to 100% all the time.  The processes tab shows 2-3 instances of werfault.exe using all of the CPU resources.  This continues indefinitely and a reboot does not fix it.  The only way I could do my usable computer is by stopping the Windows error reporting service.  However, I fear that this eliminates simply a symptom and not the underlying problem.

    I also met the very high disk activity.  I disable 'Run on a calendar' in the fragmenteur disk (after I did a full defragmentation) and I've also eliminated Super Fetch.  He did reduce significantly the disk activity, but there are always times when the hard drive is busy and I see no reason for this.

    You go to 'Services' to disable werfault.exe.  Click on the Windows button or what it is called in Vista (the thing that replaced the 'Start' button in XP).  Enter 'Admin Tools' in the search box.  Right click on "Services" and then click "Run as Administrator".  After that 'Services' opens, search for "Windows Error Reporting Service".  Double-click it, and then you can stop it and turn it off.

    I'm not having any luck with either.  Now as I type this, there are 2 instances of werfault.exe race and each consuming more than 40% usage.  "Problem reports" and Solutions show nothing.

    It started shortly after I had installed Vista.  I had finished not even install all applications - perhaps began after installing SP2.

    I think that I will reinstall Vista.  If the problem comes back, I'll have to go back to XP.

  • How to find the reason for the high use of the processor - shared server process?


    I have a Linux server with instance and an oracle The database is configured for shared server. I do not know the application using the database, but they have performance problems. When I check the server I see, that ora_s001 use a processor Core with 90 to 100%. Is there a way to know the reason for the high CPU load? I'm not very adept at finding bottlenecks or bad sql statements. What I found ist, that some users have very high logical_io and the same users have much cpu_usage.

    What can I do next? Thanks for the tips.

    You must Server multi-user shared for this number of sessions. The main objective os using MTS is reducing the memory usage on the server for the UGA and PGA of sessions.

    About the CPU usage, you must session which uses this server shared at the time, with process $ v and v$ session to trace. From there, check the SQL_ID running and then get his stats. This is probably one or two SQLs with large number of I/o logic. This happens most of the time due to incorrect cardinality estimates and/or bad statistics on the subject which causes suboptimal plans to generate.

  • Control / limiting the use of the processor

    Operating system is Windows XP PRO with SP3 installed; specific computer is HP 8100 Elite w / Intel I5 VPRO processor; 4 GB OF RAM.

    Are there options in Windows XP PRO, where the user can specify 'how' CPU usage is allowed, either by individual program or total usage?

    If so, where they are updated?

    I looked into different parts of logic; and can not find a way to do this.

    Thanks in advance for comments and suggestions.

    The use of the processor of the computer never seems to be "maximized" (rarely exceeds 30-50%) and I wonder if some setting somewhere preventing this use.

    I ran MalwareBytes, SuperAntiSpyware, and ESET. and no malicious software is present.

    Another thing to consider is that if you have a quad or a dual-core CPU, a single task tends to operate on only one heart.  So if it takes 100% of the CPU on one of four cores, the CPU meter will result in a reading of 25%, assuming that the other cores are idle.

    Instead of the Windows Task Manager, you might want to try [freeware] Process Explorer.  It gives you much more information on what is happening in your computer.  Once you use it, you will never return to the Task Manager.

    Process Explorer: <> >


  • Determine the maximum use of the processor for a virtual computer in the custom user interface

    I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

    If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

    Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

    1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

    2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

    Top - N analysis

    Weather map

    Analysis of distribution of data

    Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

    3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

    4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

    5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

    6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

    7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

    8. This is a bit of a mix of all your questions, put in place.

    You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

    Take advantage of...

  • Windows 7 CBS huge log files, very heavy use of the disk during Windows Update passages and plenty of RAM used by svchost

    Since I installed and then uninstalled windows 7 display language pack (it is thus more no record of it in the locale), namely for the Chinese, I get my CBS.logs (reaching several hundred MB to each race) filled with lines like these:

    "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~ar-SA~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.
    2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~, no found parent, go away
    2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present
    2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~, no found parent, go away
    "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~hu-HU~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.

    and these:

    «2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b...» OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_cs - cz_91faa7482cc099d9, raise: 2, applicable(true/false): 0
    2015-07-18 22:07:35, CBS Appl info: Selfupdate, component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_0.0.0.0_da - dk_5074e001f3d72380 (6.1.7601.23002), altitude: 2 lower support of revision version:
    2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_da - dk_2f34876f230695d8, raise: 2, applicable(true/false): 0 ''

    Now, it seems that windows is searching for updates on all the available languages and that really cripples my PC whenever Windows Update for new updates, what can I do to stop this?

    Thank you

    After the installation and the removal of the update of Chinese language (even though he was again through regional settings because I could not see it in the installed applications or updates, and if I used the windows update install) and after the windows update service modules and removing all CBS connects the problem seems to have disappeared.

    Thank you all for your help.

  • Credentials used in the installation of SRM, VUM and vConverter servers


    Whenever you install a Crossover, the vConverter or the SRM, it will ask you a name of user and password for the server vCenter Server. For this, these three components (VUM, SRM, vConverter) uses all the time or only during the installation? What happens if I'll change the identification information after the installation of these components, this means that my servers VUM, SRM and vConverter will no longer work?

    Grateful if you can give me feedback?

    Thank you

    Yes, it is better to create a permanent service account. It will still work after the change, but it will be a very messy process.

  • e/s logical and physical i/o with regard to the use of the processor

    Hi guys,.

    I understand that

    LIO = logical cache buffers. LIO peut incurred a PIO in order to get in the first place in the cache.

    PIO = physical disk read

    I understand that the physical i/o reads disc causing increase of disk IO and translate into long elapsed time.

    My question is if pure LIOs (read data detected in the cache, memory) or physical IOs will consume more cpu?

    I'm just curious about whether an increase in cpu high ulization is due to the high number of physical i/o, maybe due to lack of ram allocated to the db or more to the high number of pure LIOs (memory enough to cache the data, very less PIO).

    Thank you

    It is not either / or.

    The call for an e/s also requires the use of the cpu. So an IOP will use more cpu, but it will be spread over a longer time waiting for i/o. between the copy of things about the SGA and all locks and mutexes involved, it becomes a complex interaction. So the best approach is simply to minimize LIO, since this will drive pio sometimes, and with all the other current stuff, it is often the largest amount of work to reduce. Then, if you do not see the paradoxical effects of modification of the allocation of bottlenecks, you can work on those if you need to.

    Remember, the copy to give you your own copy of block for the lio and all the other stuff takes cpu.

  • How to change the style of the icons used on the tool bars mainly forward and back arrows

    He there always used to be a way to change the appearance of firefox arrowws ect for the moment I saw just type arrows forwards and backwards, I'd rather the older green arrows much easier to see and look much better how can I cange this now
    This is on Firefox 9.0.1 64 bit on Arch Linux current

    Under Linux, you can also select a pack of different icons like Tango such as used by the current theme.

    • GNOME: System > appearance > appearance > theme > customize
  • What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

    I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

    Hey Fed-Up-with-HP,

    Try using the brush included in the CD or download. Let me know what you find?

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    9 download drivers and full software features

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    9 download drivers and full software features

    10. run the download to reinstall the printer

  • Should what version of SyncToy 2.1 I use for the XP 32 bit system?

    SyncToy 2.1 site has 2 exe files.  Which one should I use for a 32 - bit XP system?

    The second x 86 hope I could help

  • I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

    I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

    Hi dude, on average

    A. from when what happens?

    B. recent changes made on your computer?

    C. you get any error message?

    First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

    Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

    Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    Type the following command and press ENTER: sfc/scannow

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Bindu S - Microsoft Support
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • PC worked 100% use of the processor from the beginning

    For awhile now, my PC worked 100% boot CPU usage, die down for ~ 50% to65% after about an hour, give or take. I have hunted high usage a bit of svchost.exe running these services: application, information from application, transfer of int background experience, client strategy group, IKEE + auth ip, sharing, support IP, multimedia class, remote access, system event notification connection Planner, Scheduler tasks, themes, user profile system service & windows of Internet management.

    If I stop the responsible svchost.exe strand, it goes up to level 50-65%, for some time and reappears, but if I stopped him once or twice more, he no longer appears, and the CPU usage will eventually pass to the 5% below normal for when I brought my PC.
    I wouldn't mind knowing three things: 1) is safe, 2) is permitted using the internet after using the method above and 3) is there a permanent solution?

    Hi Isabelle,.

    Thanks for posting your query in Microsoft Community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    When you run programs, the CPU usage reaches 100 percent. When using the processor reaches 100 percent, programs run slowly or stop responding (hang).

    Method 1
    I suggest you to run the fixit from the following link:

    Difficulty of Windows system performance slow computer problems

    Method 2
    I suggest you try the steps from the following links:

    Ways to improve your computer's performance

    Optimize Windows 7 for better performance

    Note: When you perform an anti-virus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

    Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

  • "Poor performance" VM, but the use of the processor and memory are OK!

    A colleague told me that his poor VM performance. I checked in vCenter, the CPU (Maximum in the last month) and the memory (Maximum in the past month) use two values below 75%.

    Ready CPU (over the past week maximum) stood at 83968.

    The virtual machine has 1vCPU and 4 GB of RAM

    What should I do?

    Any help would be appreciated

    If approve you the CPU, up to now, you will have claim on the CPU.  We keep our cluster around 25% in average usage of the CPU.  We push higher in 3.5.  V4 may allow a higher value, but it remains to be seen.

    Try reducing this ratio vCPU/CPU.

    Charles nights, VCP

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  • Satellite P300-1GK touchpad works very well using only the AC adapter

    Hello world

    I have some problems with my touchpad and I'm not the only one.

    When my laptop is on battery, the touchpad works fine, but when is on current alternative the touchpad works very badly. (it works 1 sec after he block 5 sec... etc.)

    I search on this problem and I find this thread:𢪘

    My one year warranty with toshiba is finished, now is a year with the seller, I guess, there is no reason to ask toshiba to solve the problem, right?

    Sorry if my English is not perfect, but it is not my mother tongue.

    How will the seller the problem I guess he contact toshiba because it can solve the problem by itself, no?

    What do you think of this problem?

    Thank you


    It seems that the touchpad issue faulty adapter.
    The other user solved the similar problem, replacing the adapter.

    If the guarantee is no longer valid, then you will have to pay for the new component.
    I am recommending in contact with a local Toshiba service partner for the new component or to check the AC adapter

    You will find here all the FSA all over the world:> supported downloads &-> find an authorized service provider

    PS: Usually the standard warranty is valid for one year. But the guarantee could be extended for an additional year after that the laptop was listed on the page of Toshiba.
    I did it in the past and I have two years warranty

Maybe you are looking for

  • Downloading from the Internet - unknown Publisher error message

    HelloI have problems when I download from the internet, I get an unknown Publisher saying the error message windows, my internet pages show also error on the page, a part of the page is missing or it's full of garbage. This happens only for the last

  • Equium A60-692-power - laptop gets no power

    Hey My Equium A60 - 692 has ceased all powered by the AC adapter (though I measured it and its give a good 19v). I noticed the end of the adapter (the end that goes into the laptop) is different from the normal ones. Rather than having a hole in the

  • No sound from speakers (E310)

    I uninstall the software today (against the wishes of my husband) and I think I uninstalled a driver that controls the speakers.  I hear that the system generated beep, but nothing from the speakers.  No music, no   Please hel

  • DVI-d cable

    I have a new hp monitor 2211 wled full HD Ireceived a vga/SVGA cable and dvi cable d...  I don't know if I should use the dvi or vga cable.  When I created the new Tower and the monitor, I used the vga cable since I was familiar with that one. Which

  • Paper settings shows only the leaves and the CD/DVD.  No roll paper option is listed.  Any advice?

    Paper settings shows only the leaves and the CD/DVD.  No roll paper option is listed.  Any advice?