Win 7 64 bit HP recovery CD does not work

Similar Questions

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• Data Recovery Advisor does not work

  In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

  The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

  https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

  1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start.

  2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start.

  Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD.

  I tried and does not work:

  -different, another USB port USB cable

  -new installation of 64-bit Win10

  -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall

  -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it]

  Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work.

  Any idea or suggestion?

  OK, here's the solution that works for me:

  YouTube

  In brief

  -check out you the shape of the package files (winrar will be required)

  -HPZstub.exe (NOT run Setup.exe)

  problem solved...

  I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2.

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• Problem of Pavilion dv67023tx, drive damaged, recovery system recovery cd does not work

  Hi all! I really need help

  I bought my computer hp laptop Pavilion dv67023tx July 2012.  When I bought it, they gave me a set of recovery disks. January 2013, I did a system restore. It was fine then.

  Later, after some software hp update my cd player began to eject automatically. The light of the hp on the lid logo disappeared also. My audio jack went wrong from the beginning. So for all these problems together, I took it to the service center, and as it was in warranty period, they sent to hp. 3 months later I have my laptop back, I was informed that hp has changed the hard drive, motherboard, cover, screen.

  There is a month Itried to install some of my software I used earlier, but they were not working. If I had no other way than a system recovery using this link

  http://support.HP.com/us-en/document/c01867418

  Then the main problem occurred. I couldn't do a system recovery from disk on my laptop. Then when I tried to do the recovery disks and he says, the system recovery disks do not support this computer. You are not able to restore this system with these discs.

  http://support.HP.com/us-en/document/c01868346

  This link said, maybe its because hp has changed the motherboard.

  Now what should I do? I need a factory. But recovery in my laptop drive does not work, my recovery disks do not work. Please help me out of this. Or give me email ID so I can contact HP directly with problems, I do not find anything.

  Others suggesting me to install a pirated Windows 7, I don't want it. I had a real windows 7 pre installed, why should I?

  I'm sorry but I can't help you with recovery disks not working is not on your computer, but I don't have an alternative. If you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Premium using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Win7 64 bit freezes & arrow function does not work, do not click to navigate anywhere

  Win7 64 bit PC crashes & arrow function does not work, do not click to navigate anywhere, exceptionally after being on ~ 2 + hrs. I can only turn off by pressing the power switch for about 5 seconds.

  Hello

  You did changes to the computer before the show?
  
  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:  If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Also provide an observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer