Win 7 Ater lost backup,

Similar Questions

• Flight Simulator 2000 works on Win 7? Lost disc 2 MS will replace it?

  Flight Simulator 2000 works on Win 7?  Lost disc 2 MS will replace it?

  Sound Windows not listed on Microsoft 7 compatibility Centre, but given its age you are unsure it will work fully, or not at all. A quick search on Google shows that some people have had limited success. You can try Compatibility Mode to see if that helps:

  http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .

  Regarding your drive lost, please see:

  http://support.microsoft.com/kb/326246 .

• Win 7: incrementing error backup and restore previous "Windows backup has not been implemented" and that "Windows cannot find a backup for this computer".

  * - Title original - Win 7: incrementing previous backup and restore

  Last week, I did a "backup and recovery" on my Win 7 64 bit computer, create a folder WindowsImageBackup 118 GB on an external HARD drive.

  I like incremental backup the same material on a base weekly, I tried to do the first incremental backup this morning.
  However, my "Backup and Restore" menu control configuration\systeme and securite\ tells me that "Windows backup was not put in place" and that "Windows cannot find a backup for this computer", even if the external HARD disk is attached and recognized.
  How can I set B R & to realize progressively the same backup that I did last week?  I don't want the schedule to run regularly, but will do it manually.
  Thank you
  Colin

  Hello

  Did recent changes to the computer?

  I suggest you to refer to these articles and check if they can help you.

  What backup settings should I use to maximize my disk space? : http://windows.microsoft.com/en-NZ/windows7/What-backup-settings-should-I-use-to-maximize-my-disk-space

  Backup and restore: frequently asked questions: http://windows.microsoft.com/en-us/windows7/back-up-and-restore-frequently-asked-questions

  For more information:

  Windows backup does not an incremental backup media when the Windows Media Player Network Sharing Service is enabled in Windows 7: http://support.microsoft.com/kb/981470

  I hope this helps.

• If I delete an IPad to my icloud account it its never lost backup?

  I got so confused with the help of icloud password recovery FRO my Ipad I erased my ipad instead of recovering it. Now, I've lost my last back for my IPad? ****

  Remove Apple device ID will not delete any iCloud pre-recorded backups

  After you remove the device to Apple ID, you cannot use find my iPad option

• doesn't win vista failed no backup

  I have a lenovo y510 thinkpad, it fell.

  It came with a legitimate copy of win vista Home premium (or whatever it came with).

  Now don't boot, mode economy remains stuck at the same point several times (maybe a hard disk damaged)

  Tried the restore partition C lenovo, it finished but no difference.

  I have no backup disk or boot - I can get my dos operating system?

  Hello

  The operating system installation disk is provided by the OEM of the computer. I suggest you to contact the Lenovo support site for assistance.

  http://support.Lenovo.com/en_US/

• WIN 7 x 64 backup fails with the error 0 x 81000019

  My backups using Windows 7 backup & restore used to work flawlessly until a few weeks back when they have started to not give the error code 0 x 81000019. I've tried everything suggested online ensuring that VSS & SPP to automatic and started. I even went a step further because I had a personal copy of all my files on my backup drive (WD My Book Studio Edition 1 TB) - I did a clean reinstall of WIN 7 thinking that would solve the problem but nothing is done - I have always the same error message "a SHADOW copy could not BE CREATED - please CHECK VSS & SPP APPLICATION of the EVENT LOGS FOR MORE information. "DETAILS: INSUFFICIENT STORAGE TO CREATE THE SHADOW COPY STORAGE FILE OR OTHER SNAPSHOT DATA.

  My backup disk has 822 931 GB free GB!

  Many others have had this same problem... Help, please!

  Mike

  Hello msab,.

  Thanks for posting on our forums.

  Please check that the hard drive is formatted in NTFS.  If you think that the updates may be the cause, unstill them one at a time to see if that solves your problem.

  I hope that this answer to your questions, if you need further assistance please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Import of PSE9 Win to PSE9 Mac backup

  Hello

  I was just having fun with my new Mac when I tried to import backup edition of Windows 9.0 PSE.

  Version Mac said that "there is no correct backup hard disk!

  The backup was made a few minutes before with version 9.0 of PSE.

  The catalogs of the victory and the Mac version are not completely compatible?

  All pictures are on an external hard drive. The PSE catalog is on the computer - but where? I tried to copy the catalog file only. But I have not found it. A does anyone know where to find the catalog file in Win Vista only?

  Now, how could I bring my catalog based on Win or the backup of the version of PSE - Win for my new Mac?

  Thanks for your help!

  They are compatible, but there is a witch hunt. You must find the .tly, not the whole file and point to restore.

  More details here:

  http://barbarabrundage.com/2010/10/07/moving-a-catalog-from-Windows-to-Mac/

  EDIT try not to move the catalog separately. It does not work.

• OfficeJet Pro 6830: After winning 10 ipgrade lost the Scan from the printer function

  Update Win 7 Pro.

  Digitization of works normally in the HP Support Assistant (fully updated) and inside my desktop (the .bin file) application where I have access to all the functions of the printer.

  Scanning initiated by the product of the printer normally but in the end, it fails with an error message.

  The error message reads:

  "The HP scanning Application could not save the file to the specified location.

  It is same location Assistant support and the decstop succesfully registers, namely

  C: Users/username/documents.

  Is this a form of rights issue administrator/access, I wonder because he is obviously not a driver issue or a printer.

  Thank you very much in advance for any wisdom.

  You know @Scarguts, I have to be honest, I don't know if it is a question of rights, or if there is something wrong with the destination of your choice. I choose a new destination and try to scan the image. You can make this change in the printer Assistant software.

  This will help isolate the problem.

• Lost backup utility from One Care to Windows Live Essentials?

  I recently transferred to Windows Live Essentials after my subscription to One Care became unavailable, the transition was easy and I found that Essentials is a great alternative, how ever when I realized that he was not back up installation included in the package, I returned to the accessories of Windows to back up my computer to my external hard drive.

  Only to find that the backup facility had been removed when I removed One Care? I searched my machine and looked at restoring to an earlier installation of date back to the utility originally stae, but have had no joy.

  Because all my back up to external hard disk refer to One Care (which is now removed) my machine does not recognize the back ups, and because One Care isn't here, too, there is no possibility to restore from the hard drive.

  One has the same problem and is there a solution to restore Windows backup utility with doing a full reinstall and lose all my programs, files, data, ect? help urgently needed please!

  I had the same problem after removing a care. Found the original disks supplied with the Microsoft XP Home Edition computer, browsed the disk and found the backup utility program it and reinstalled.

  However, I think that the problem should not have occurredit the first place. I hope this helps.

• I have win nt and lost my administrator pasword is there a way to bypass the pasword signon. I would like to upgrade to xp but can't with signature, the.

  lost SignOn password for administrator need suite works around the problem in the Windows NT operating system

  You can't upgrade from Windows NT to Windows XP - a "clean" Windows XP installation is necessary.  Please see: Clean install Windows XP Carey Frisch

• Lost backup directory

  I have several bare hard drives that I use for weekly backups of archives in an external dock using synctoy. In one of them, disappeared from the backup directory. I know that the data is still there, since the properties sector chart indicates the amount of space used, and I've just recovered from this situation once before. All that shows in windows Explorer is the trash, information of the system, a folder of Diskeeper volume containing old data defrag and a couple of files found.xxx chkdsk runs. All these files except the diskeeper and $RECYCLE. BIN are inaccessible and show 0 bytes in properties. $RECYCLE. BIN contains the file of 0 byte S-1-5-21-622440268-1636185174-4238469710-500

  It happened once before, but I don't remember if I did anything other than restart to solve it. Given zero had no effect this time.

  Other facts:
  -We have abnormal defragmentation endings in the past, due to training dismantling suddenly for no apparent reason, and it could have happened the last time I backed up.
  -It is a 2 TB drive which is full of 82%.

  Thank you for the comprehensive answer. Unfortunately, the hidden folder was not the problem, nor was there a restore point previous versions...

  But: Shortly after the announcement the problem, I have messed around with explore for awhile, and somehow the c:\found.001 file became available. Don't know what I did. I was not connected with administrator privileges. There was a bunch of files under named dirxxx.chk. I've highlighted several of them to random file names and little recognized, but explore shows 0 bytes for them. I tried to copy a couple of them to work in the car to see if they were valid file types, but they weren't, so I abandoned that effort.

  But after trying your suggestions, I decided to go back to the .chk files more methodically. BINGO! dir001.chk had the content of the missing backup directory full of files intact. I created the correct folder and moved them to her, removed the files found and everything is good. Now I'm happy I made the hour long chkdsk yesterday before trying anything else.

• Need to reinstall Win 8 and lost the set up file.

  I bought the download Win 8 line for $39.99 and it worked fine. I had trouble with one of my hard drives and had to reformat. Now, I can not find all of the files on my computer. I'm sure that I have from somewhere. Is that what I can do to find this file? Does anyone know the setting up the file name or where to find?

  Thanks for your help.

  Ed

  Go to the order summary page, you can find your product key:

  https://www.mswos.com/

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

• R61i (7732-7EC) win xp sp3 ~ lost audio

  I left my laptop, cut volume: returned to find no audio signal.

  I have no sound. I have reinstalled audio drivers twice (first soundmax UN-installing the Add/Remove Programs Control Panel). When I play the media, the software seems to work very well, do not detect any malfunction.

  When I try to adjust the volume of the panel\sounds ctrl and devices audio, all sliders work, but when I go to the Audio tab and choose the volume of medium, sound recording and playback - I get "windows cannot execute sndvol32.exe. Use ctrl to add or remove installation Panel. but I don't think that's the problem, because it has always been like that.

  my microphone works very well and people can hear me on Skype. My speakers are working and so is the audio line to the front - Jack, I hear of your system, for example when the power cable is removed or inserted.

  i ' v done everything I can think of, short of checking the status of my warranty.

  What should I do now?

  Thanks in advance for the same reading on my problem.

  Hello

  I have the solution... and it affects all pc isn't just R61is

  Follow these instructions to the T...

  1. press start.
  2. click on run.
  3. Type "c:\windows\system32\.
  4 and find "sndvol32.exe".
  (a) If you can't find it, then download it here! http://tinyurl.com/2qch9c
  check out this "c:\windows\system32\" file and if you get a prompt to overwrite, just allow it.
  now repeat steps 1-4
  (b) If you can't find it, go to step 5.
  5 double-click on sndvol32.exe,.
  6. lift all the sliders upwards, and if you find the mute sliders - "reactivate" by clearing the check box.
  7. play music! Yay!
  8. If this does not work, go back to snvol32.exe.
  9. click on options in the menu alt, then select Properties (press alt, p, key)
  10. in the "show the following volume controls"-, select all.
  11. Repeat steps 6 and 7.

  I want to thank everyone, but esp couriant Tech Support Guy forums. the link to the file is his, and it's beautiful.

  I would also like to take this opportunity to encourage people to respond and update the forums as much as possible when you have technical questions. Finally, the world will be a great place if all we have is only for the benefit of the other.

• HD crashed, new laptop, having the backup drive, lost prouduct key, cannot download to new laptop

  HD crashed, the new laptop, have lost backup disk prouduct key, can not download again portable prouduct key need.

  Hello

  If your copy of Windows is preinstalled, then the copy of the product key should be on a sticker on the side of the Tower (for desktop computers) or on the bottom (for desktop computers) and the certificate of authenticity (COA). If you no longer have this sticker, then contact the manufacturer of your computer to help with the key, you can check out the link below to get contact information for computer manufcaturer associated with MIcrosoft.

  http://support.Microsoft.com/default.aspx/GP/oemphone

  If you have the disc at retail, then you can check the link below on how to identify, locate, and replace a product key for Microsoft products.

  http://support.Microsoft.com/kb/811224

  Or you can contact the Microsoft Customer Service by phone to request a replacement key.

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm