Win 7 (Pro) - cannot install - Intel HD graphics adapter WDDM 1.1 and 1.2 of WDDM (39.5 MB)

Dear Sir.

I use a Win 7 (Pro) PC Dell Optiplex 390 to my office.

This HD Intel adapter comes from the window of Microsoft Update. I have failed to install it in many times.

Windows 7 error code is 8007013.

I followed instructions from Ms Website for this error code, but still not managed to solve this problem.

Grateful if someone knowledgeable could help me solve this problem.

Thank you

Low

Utility update Intel drivers allows you to get the latest drivers for audio, network, other components: http://is.gd/jQGR7

Tags: Windows

Similar Questions

  • Win 7 Pro cannot install the upgrade of Vista 64

    I bought Windows 7 Pro on the Microsoft.com site my Dell Studio 540 had Vista 64 when buying back about 4 years ago. I also bought the dics of Microsoft backup at the same time. The Win 7 Pro disc has the number 6/11 X 15-60651-03. I bought the UPGRADE, so I wouldn't have to start over with a new facility. What should I do to perform the UPGRADE?

    When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

    If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

    Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate

    Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate

    Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition

    Windows Vista Business > Windows 7 Enterprise

    Windows Vista Ultimate > Windows 7 Ultimate.

    http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  • Cannot install Intel Extreme Tuning Utility

    Cannot install Intel Extreme Tuning Utility, I run the exe file, it shows it's installation and then error pop up: Setup doesn't have one or more problems caused the installation program fails code blah blah blah error 0 x 80070643

    Hi Airidas,

    Intel Extreme Tuning Utility is not compatible with Windows 8. For more information, see this Windows 8 Compatibility Center link:

     http://www.microsoft.com/en-in/windows/compatibility/win8/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=win8&Type=Both&CurrentPage=0&TotalPages=1&SortCriteria=Relevance&ShowCriteria=2&Compatibility=All&TextSearch=Intel%20Extreme%20Tuning%20Utility&ProductName=Intel%20Extreme%20Tuning%20Utility&LastRequested=7&Locale=en-in

     

    I suggest trying to install the Intel Extreme Tuning Utility in compatibility mode and check if that helps:

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    I hope this helps. If you need help on Windows please let us know.

  • Paper textures Adobe pro cannot install module: general error message. Help

    Paper textures Adobe pro cannot install module: general error message. Help

    Hello Stephen,

    If you have upgraded your version of Creative Cloud Deskop App in the last 24 hours (to build the 2.1.1.110), you may experience installation problems with some modules that contain the locale specified in the MXI product. I believe in that paper textures Pro has a which may explain the error message.

    Please note that we are aware of this problem and are working on a fix so please bear with us for the predictable a few days until we iron out the bugs and problems arising from the new version. Sorry for the inconvenience caused.

    During this time if your Adobe applications are still on the 2014 CC or MORE (i.e. you have not improved their 2015 CC) then you can select the method 'install another way' described in the troubleshooting step and download the ZXP which allows to install by using the extensions Manager, as before.

    I hope this helps.

    Krystal

    -Team - Add-ons

  • Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

    Hello!

    I have several lenovos windows 7 with this update

    Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

    I'm trying to fix it with the original driver?

    http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

    all the solutions out there?

    THX

    Peter

    You can download the driver from the Intel website (search on your model number of graph, then Windows 7), read the notes first check it is correct for your hardware, uninstall the graphics drivers (Windows will return to a default basic driver), restart and install the new drivers.

    If this does not work, the Lenovo Web site will be older (but certified to work) drivers for your system model.

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    Hello LisaQuaranto,

    I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

    To perform a clean boot on a computer that is running Windows Vista:

    a. Click Start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    b. on the general tab, click Selective startup.

    c. under Selective startup, clear the check box load startup items.

    d. click OK.

    e. When prompted, click on restart.

    f. after the computer starts, check if the problem is resolved.

    If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

    http://support.Microsoft.com/kb/929135

    In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

    You can download the update following the link below:

    http://support.Microsoft.com/kb/968930

    Thank you
    Irfan H, Engineer Support Microsoft Answers

  • Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted (zip also does not work)

    Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted

    This question is unanswered.

    artistichooves artistichooves February 6, 2014 06:31

    I've only had 3 programs installed with the two cd I got with my adobe creative suite 6 (edition education, student and teacher)

    It didn't load any further when I insert the second cd. (tried several times) on my windows 8.1

    I got a license number, but it does not work on the creative cloud

    I tried to download the zip file, but it did not work

    I have ragequited (sorry)

    and now I want to try again.

    -J' have the license but I can't use my cd or download the zip

    -are there a cd I can buy again or something?

    It seems that my series works more :/

  • Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

    Hello.

    Another problem.
    When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
    Whenever the error message: the driver is not validated by your system, please contact your producer.

    So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

    Hi mate

    You can install this driver, but you need to use different installation procedure.
    You must install it in the Device Manager.

    Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

    But note; I read here that the use of non-Toshiba drivers is always at your own risk

  • HP Pavilion dv6-6b57sa - cannot install intel wi di update

    I have the HP Pavilion dv6-6b57sa Entertainment Notebook PC drivers.  (Windows 7 Ultimate 64 bit SP1, Intel (r) Core i3 - 2330 M CPU @ 2.20 GHz, Intel HD Graphics 3000)  I've updated all the drivers on the HP site.  The laptop came with a connection wi - di installed but it's up-to-date for netgear push2TV 3000.  When I tried to upgrade wi - di I kept getting the following error message.

    I finally managed to install intel di wi.

    The HP Pavilion dv6-6b57sa Entertainment Notebook PC is installed with graphics cards that are not fixed.  On the HP site I found a response to a similar error message that says that the graphics driver is incompatible.  The answer said updating the bios at startup until drivers graphics.  I updated the bios to fixed.

    Then, I updated all the drivers with the first update of windows, updated intel and HP update.  Some updates of HP were already obsolete because the HP updates were not up-to-date.

    Then, I uninstalled and reinstalled the ATI Catalyst Control Center.

    Then, I uninstalled and reinstalled both drivers graphics.

    Finally, I uninstalled and then installed the intel widi set pro software and driver from intel.

    This still does not allow me to install intel di wi.  In intel support di wi I noticed a response to a similar error message and it seemed to suggest the intel my share of fi wi of the intel pro set software did not work.  Change of programs (Control Panel) I disabled my option of WiFi intel box in the intel pro set software and restarted.  Change of programs, then I checked my WiFi intel and rebooted.

    Intel software di wi finally worked.

  • Win 7 Pro 64 install, after good connection install & internet Microsoft Update hangs forever

    A failed hdd on HP 6515 b required new hdd & install Win 7 Pro 64. After the proper installation & connection internet Microsoft Update hangs forever. Otherwise the computer works fine. We need .net updated for special application.

    Unfortunately, this happens to a lot of people lately.

    Windows Update problem (new)

    The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

    I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

    NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

    1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
    2. Start and end the re - install Windows 7 SP1
    3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
    4. Install KB3083710 and reboot manually.
    5. Install KB3102810 and reboot manually.
    6. Restore the Internet connection, and run Windows Update as usual.
    7. After a few minutes, you should have a lot of updates to download and install.

    Thanks to Ken Morely

    Note: When you search for the 64-bit version of these KB specify 64-bit.  The 32-bit versions do not say what version they are.

  • key error for win 7 pro, re-installed on the solid state drive

    Hello

    I installed an SSD and win image did not work so I reinstalled my Windows 7 PRO on CD
    at startup, I got error key for win 7 pro
    I spruced up several times product key
    How this can be fixed
    Help, please
    Thank you
    James

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Premiere Pro "cannot install properly.

    I installed the trial of the latest version of Premiere Pro on my Windows 7 laptop. I checked, I had the system requirements to run the program. After downloading, I got an error message that the program didn't install correctly when I tried to open it, and the pop-ups saying the program had crashed and must be closed. I restarted my computer and closed all background startup programs and tried again. I then uninstalled and restarted my computer and then reinstalled after the download and installation, I tried to open the application from inside of CC, then separately from without. Here is my error code since the crash of Windows window:

    Signature of the problem:

    Problem event name: APPCRASH

    Name of the application: Adobe first Pro.exe

    Application version: 9.1.0.174

    Application timestamp: 564dce25

    Fault Module name: DNxHR.dll

    Fault Module Version: 2.1.0.9

    Timestamp of Module error: 55352343

    Exception code: c000001d

    Exception offset: 000000000000f4c9

    OS version: 6.1.7600.2.0.0.768.3

    Locale ID: 2057

    Additional information 1: b14f

    More information 2: b14f0bb255ff1fda75b2218f14e23e1b

    3 more information: 1a8d

    Additional information 4: 1a8d695bd80513a1d5d2f39f3606178d

    Application error

    Cannot start properly (0xc000001d).

    If anyone can help me understand what to do with it, I would be extremely grateful. If I missed information I can give it, no problem.

    uninstall all cc on your computer

    clean a http://www.adobe.com/support/contact/cscleanertool.html

    Restart your computer

    install the application of office cc, https://creative.adobe.com/products/creative-cloud

    Use the desktop application to install first pro.

  • Adobe Application Manager does not update on Win 8.1-> cannot install apps

    Since the update PC Windows 8.1, Adobe Application Manager that manages creative Cloud applications will not update, that is why we cannot install or update apps CC (specifically, Acrobat).

    By clicking on the download button on the Acrobat of CC page, Adobe Application Manager begins to update, and then stops with error:

    We encountered the following problems:

    Adobe Application Manager cannot install.

    [Quit]

    Repeated attempts fail.  It is urgent to admin several CC apps so to be forced to use the App handler brings us a break of substantial activity.

    /SRC illuminating NYC

    Hi illuminantpartnersnyc ,

    Close all Adobe application, browsers running at the back and try to install again. If still the same error please follow the mentioned steps:

    1. go to the Files(X86) C/Program Files/Adobe/OOBE /Common and rename to OOBE.old

    Please go to C/user/User Name/App date/local/Adobe/OOBE and rename it to OOBE.old

    Log on to CC Office: https://creative.adobe.com/products/creative-cloud and run as administrator to install it.

    If still the same error then please activate hidden admin: http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windo ws-8 - a.html and try to install again the hidden admin account.

    Please check if the log: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html if the error still persists.

    Kind regards

    Romit Sinha

  • Satellite Pro A10 - cannot install Intel graphic driver

    Hello

    I m wondering I ve been on the Intel site to get the disc for my graphics card that Toshibas is old Intel have a 1 latest release for my view controller and when I download and try to install it, it says cannot continue please contact the manufacturer of your computer.
    Can you help me please because there must be a way to get it?
    Thank you

    Hello

    As a general rule, you should always use the Toshiba drivers because they are specially designed for these graphics cards.

    Good bye

  • Cannot install Intel graphic driver on Satellite Pro A40

    Please could someone help me.
    I download the graphics driver updates for my computer toshiba laptop. The brand drivers are INTEL a. I downloaded the drivers from the site to intel. All the requiments that are correct are correct.

    When I went to install the drivers an error message came up saying "the driver cannot be installed on this computer, please contact your computer manufacter.

    Please can someone help me.

    Thank you
    Greg

    I put t know what is the problem? Why you n t use graphics drivers on the Toshiba site?
    The graphics card drivers, manufacturers are not designed for laptops, so you can not install it.

Maybe you are looking for

  • OfficeJet 6600: officejet 6600 will not be installed

    I have a computer that is running Windows 7 (updated) with a 6600 Officejet attached via the USB port. It worked fine for 3 years, BUT I had to reinstall the printer 7 times in the last 2 weeks. When I turn off the computer at night and turn on the n

  • DataSocket PSP data buffering

    I have a VI that writes to a shared variable of network using DataSocket.  The URL DataSocket using PSP.  I have an another VI that reads the variable shared network also using DataSocket.  I'm experimenting with buffering to see when data is lost if

  • HP M6 1279el - graphic in Metro App win 8.1 is corrupt

    Hello. I have HP ENVY m6-1279el laptop with AMD Radeon HD 7670 M (2 GB dedicated DDR3 memory) and Intel HD 4000. My OS is Win 8.1 and I have a problem with Metro App. When I started some graphics programs is corrupted. Sometimes I get black screen an

  • What does the COODOFEA error code? How to fix?

    I can't download and then play wmv files - the bar at the bottom of the page request what to do - you select - it does nothing and then freezes on the screen. Shoul I use a hammer on this machine?

  • Creating a CSR using the motorway

    Hello community. I'll put up a solution of telepresence with Expways and AAU/IMP. There will be a few G2 MX300 and SX20 but Jabber 100-200 guests. I am trying to set up the area between Expway Core and Edge using TLS, so I have to create CSIS for CA.