Win 7 Setup error

Similar Questions

• HP solution center v13 Win 7 Setup error

  Hello

  I have a Deskjet d2360 and I lost the installation CD. I tried to install the driver from the hp site v13 for my windows 7 but I can't install it, almost at the end, it gives an error! I tried several times...

  Someone can give me a link to a v12 of older HP solution Center (or more) for windows 7 so I can try to install?

  Thank you.

  WOW! After MANY trials MANY MANY, I managed to install the SOLUTIONS CENTRE successfully!

   

   

  
  Here's what I did:

  I ran the unsintaller of level 4.

  I noticed in the Windows event log (Event Viewer on Type 'Run... ("and goto Windwos Logs-> Applications) an Installer error: could not access network location % APPDATA%\?  and I added the variable %APPDATA%\microsoft\windows\sendto like this: http://forums.techguy.org/7785747-post35.html

  Then I started regedit.exe and deleted all traces of printer HP. I used to find them and sought a "HP\'"\HP"and most importantly"Hewlett-Packard"and deleted the keys (and parent keyes) if they were related to the printer.

   

  Then I installed normally, and it worked. After 3 days of trying I finally managed to install the software... beautiful HP programming.
  

   

   

• Windows Automation api. Setup error: cannot update your XP files because the language installed is different from the update.

  Installing Win AP Automation! 3.0 to accelerate VB Express 2010.

  Warning message:

  Update for MS Wim (KB971513) Setup error

  Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  My XP language is Norwegian. The rest of my 'stuff' MS is English.

  
  

  • What you have already tried to solve the problem

  Hello

  I suggest you to check the article mentioned below.

  Error message: Setup cannot update your Windows XP files

  http://support.Microsoft.com/kb/555042

  I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Presenter Setup error

  My computer. Window 7, MS Office 64, Win 64

  Donwloaded evaluation version only available to Adobe Adobe Presenter (for windows) specifies no 32 or 64 versions available.

  Setup error:

  Presenter of 32 bits, can be installed with little power poitn32. System can't find Powerpoint 32.

  This means what he says. Read the system requirements:

  http://www.Adobe.com/products/presenter.html

  Mylenium

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• DAQmx Setup error

  I have a brand new with Windows7 - 64 bit.  I installed LV 2010 RT, FPGA and all drivers. No problem.  I then installed LV 2012 with RT, FPGA, a few tools and drivers.  I got an error when installing on DAQmx.  I told him to continue.  Then, I got an error at the end saying that something was not installed correctly.  The two messages are attached below.  I have uninstalled all NOR associated and repeated.  Same result.  I can open and run LabVIEW 2010 and 2012.  I can open MAX.  However, when I attach a USB-6008 to the computer, it is said that the driver is not loaded.  MAX can't see the 6008.  Which, of course, corresponds to the Setup error.  Any ideas how can I fix?

  Thank you

  DaveT

  Hi Dave,.

  This problem is often related to anti-virus software. You have any antivirus running on your new computer software? If you do, please try to uninstall DAQmx, disable the active virus scan utility and install the drivers as administrator.

  I hope this helps! Thank you

• Why do a "not a valid win 32 application error when you try to download service pack 3 for xp? How can I fix it?

  Recently, my computer crashed and had to be reloaded with XP. Kinda weird Explorer that all text is very very low. I tried to adjust the resolution and have implemented the automatic updates. I thought that installing service pack 3 could help, but I can't download. I get the Win 32 application error. Can anyone help?

  You download the SP3 on the website?

  try to get SP3 installed using Windows Update utility (start > all programs > Windows Update) and see if it will install that way.

  Hope this helps

  Response if it did not work

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• Windows 7 Ox80070017 Setup error

  Good then I got an installation disc that made the files it contains and appear on my computer but I have a new problem now in which an error pops up saying that some files are not which is really unfortunate. The error code I get is: Ox80070017

  original title: Windows 7 Setup error

  Hi Mohamed Kebbay,

  Error code 0 x 80070017 means generally bad media. I would recommend that you download the file again, you may have corruption in ISO itself. So if possible, download the file again. After you download the new copy, try burning at a lower setting 4 X or 8 X speed. Once you burn the disc on a lower setting with the new ISO standard, and then see if you can install Windows 7.

  See installation and reinstallation of Windows 7 for more information on installing Windows 7.

• BlackBerry World: "application setup error".

  I made a simple program called "Custom dice. When I launch from the NDK BlackBerry on my Dev Alpha, it works fine. However, when I try to install my application on BlackBerry World, I get this rather vague error message: "application setup error". Is attached a screenshot of this error. I have absolutely no idea what could cause this error. Someone has any advice how to solve this problem, what I could do to find the cause of this error? Thank you!

  I can confirm that the application now installs fine. What gives some help apparently contributed time

• Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  I'm trying to reinstall Google Chrome on my Windows 7 Home Premium Service Pack 1 computer laptop.  I uninstalled google Chrome and tried to reinstall it on my Windows 7 laptop.  I can download the installation file or install dynamically without having to download the file.  The installer of Google Chrome runs, but at the end of the operation, I receive the error message 'unable to cache the installation program downloaded. "Error: 0 x 80070002.  I tried to install Chrome with IE9 and Firefox 10.0.3

  PC: Dell Studio 1557
  Processor: Intel Core i7
  RAM: 4 GB
  System type: 64-bit operating system

  Hello

  1. are you able to install any other program normally?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Put the computer to boot and then try to install Google chrome.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: after the troubleshooting steps, please return the computer to start as usual (see step 7 link mentioned above)

  Method 3:

  Follow the instructions in the link below.

  http://support.Google.com/installer/bin/answer.py?hl=en&answer=126299

  I suggest also please contact the support team of Google for assistance.

  http://support.Google.com/chrome/?hl=en

• Windows Media Center Setup error: setup parameters for your region could not be determined.

  original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

  windows vista operating

  Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

  The configuration settings for your region could not be determined.  Restart your computer to solve.

  Things I've done:

  restarted computer several times

  run system restore

  disabled the norton 360 firewall settings

  has ran norton pc tune up

  still can't media center to work Please HELP

  Thank you

  Hello

  The problem may occur if the Windows Media Center components are not registered correctly.

  I suggest to try the following steps to solve the problem.

  The registry Windows Media Center components

  =========================

  1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

  2 type the following commands, press ENTER after each line.

  REGSVR32 ATL. DLL

  CD C:\WINDOWS\EHOME

  EHSCHED /UNREGSERVER

  EHSCHED/SERVICE

  EHRECVR /UNREGSERVER

  EHRECVR/SERVICE

  EHREC. /UNREGSERVER EXE

  EHREC. EXE/REGSERVER

  EHMSAS. /UNREGSERVER EXE

  EHMSAS. EXE/REGSERVER

  We can open Windows Media Center now?

  It will be useful.