Win 7 - shared folder - sharing turns off sometimes

I shared a folder in Win 7 PC. At any given time when customer accesses to / / ip-address, it's keep on request for credentials. When I turn off and turn on the network in Windows 7, it works fine. What is the real problem. ?

Hi Mathieu,

Thank you for your response.

Have you tried the methods mentioned in the previous answer?

Complementary to the previous response methods, you can see the following information.

How can I troubleshoot network card?

http://Windows.Microsoft.com/is-is/Windows7/fix-network-adapter-problems

Hope that this helps, please update the State of the question, we will be happy to help you.

Tags: Windows

Similar Questions

  • Satellite M40X turns off sometimes

    Hey people,

    My M40X turns off sometimes. I don't know what causes it. I don't know why. I do not think that the dust in the fan, because I have just 2 months. I got the latest bios of September and the last chip drivers together, I think.

    What can I do?

    Hello

    You said that your laptop turns off sometimes.
    This problem only occurs if you use a particular software or it s a general problem?
    I ask because sometimes 3rd party software may have had a bad influence on the operating system.
    But it could also be an overheating problem.

  • Y580 with Win 8 Wireless keeps itself turning off during sleep - new edition.

    I have a newer Y580 with Windows 8.

    I've had this computer for months and the wireless worked perfectly well. I did no new changes and updates that I can remember recently have run.

    Whenever I close the lid on my laptop, the wireless connection will turn off. Windows displays the airplane mode is DISABLED and it shows no networks available in the section 'Wi - Fi '.

    Wifi works only after disablng of the wireless device, the reactivation of the device and then clicking on "Diagnose" from the popup menu of the device.

    Any advice would be appreciated.

    Thank you!

    Hi jaharris,

    Thanks for posting. Please try the suggestions below.

    > Go to control panel
    > Open center network and sharing Center
    > Click on "Change adapter settings" (located on the left panel)
    > Right click on the "WiFi" icon and select "Properties".
    > Click on the button "configure."
    > Select the tab "power management."
    > Uncheck "allow the computer to turn off this device to save power".
    > Click OK

    Hope this helps and do post back with your results.

    Concerning

  • Satellite Pro 6000 display turns off sometimes

    Hello

    I hope someone can shed some light on a problem with a laptop Toshiba Satellite Pro 6000 that I can't seem to get to the bottom.

    The laptop has Windows XP Professional installed and works fine, except for the fact that intermittently (could be 5 minutes, maybe 90 minutes) the display screen is what I can only describe as 'blocks '.

    The o/s plant (I ran BACK and Tests of diagnosis when the problem occurred) I would say movement of waves of mouse to the screen and activity HARD drive software continues running, except the screen is unreadable with blocks of color scheme.

    Any ideas or suggestions as to what this could be, and how I could go about repairing it?

    Hello

    It's very strange question.
    Have you tried to update the graphics driver? If not then please select this option.

    Besides if the update doesn't fix this eventually it there something wrong with the hardware. In this case, it is not easy to say what could be wrong.
    In your case, I recommend you connect the external monitor if the problem occurs.
    If the color blocks will also appear on the external monitor so eventually the graphics card or motherboard is corrupt.

    But, if the problem occurs only on the internal laptop display, so I would say that there is something wrong with the display or the FL-inverter.
    In this case, you should contact the technicians to solve this problem, because guys have more experience than each common user like me and you.

    Good luck

  • Sometimes the Satellite A210-16F cannot turn off

    I have laptop Toshiba Satellite A210-16F and it won't turn off sometimes.
    Happens to the window "Stop", but it wont close and stays like that until what I stopped it manually by holding the POWER button.

    What could be a reason for this problem?

    Sometimes I can't stop my laptop or closing procedure crashes as impossible to close some of the processes that are running in the background automatically.

    In my case, sometimes it software Adobe acrobat reader crashes and I have to manually close this process (in the Task Manager).

    In most cases, the operating system cleaning can help I use the program known. CCleaner. It s free and you can clean the system and the registry.
    There are also other applications that could do the job so but I m satisfied with this program.

    Maybe this will help you too

  • Windows XP does not turn off computer

    I have an old laptop that I put the upgrade of Windows XP win 98.  Win 98 will close and turn off the computer without any promps me.  This upgrade Windows farm but dosnt stop the computer.  I get a message, ok to shut down the computer now.  Then, I struck my switch to turn the computer off.

    Anyone know a solution to make Windows XP close and turn off the computer?

    Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/xpinstall/threads 
    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Canon t5i lcd turns off after taking pictures

    I just got my Canon T5i... I noticed that the LCD screen turns off sometimes after taking photos or videos. I don't know why... I did not press the "info" button and it will not turn back even if I press the shutter button to halfway... I know that the camera is still on though because if I press on the screen it will take a picture and this picture is stored on the card (after that I turned off the camera completely and wait a few minutes and turn it back on)...

    When the LCD is turned off, I can't get it on... I will touch the screen and try to press the display button to see photos, but it will start...

    and Yes, I disabled the auto lcd off etc...

    Here is a little video I made sure to show you what I saw. http://www.YouTube.com/watch?v=TroZa5xLduM

    Should I have a defective camera?

    I noticed in the video that she has Lieview, take a picture and then the picture does not appear, and there is more no Liveview display.  She then press the Liveview button and nothing happens. There's no other option I can think of that allows you to turn off the LCD screen back when you're in Liveview. That tells me that the device is defective.

  • Windows Firewall turns off automatically.

    Windows Firewall turns off automatically at startup, sometimes. I use Trend Micro Internet Security and Windows Security Center. They both have a firewall. (1) I always here you can only have one firewall at the time, is why that Windows Firewall turns off sometimes? (2) if so, why only sometimes? (I don't have Windows OneCare.) (3) should I manually turn off the Windows Firewall and just use the Trend Micro firewall? (4) that I will protect? Please answer 4 questions.

    I'm sorry, I wasn't clear enough in my question. I'm not asking for possibly a recommendation on what AV I have to use. I know not if I have to choose only one I'll choose Trend Micro. I wanted to ask what is the right way to turn off the Windows Firewall and make sure it stays off. When I open the Windows Security Center it shows firewall as YOU, but she does not have an option to OFF.

    Start button > in the search box, type windows firewall > look up, click onWindows Firewall > in the left column, click turn on or off Windows Firewall > the rest is self-explanatory.

    t-4-2

  • Sharing files and printing turn off the coast

    I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

    Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.

  • Move a virtual machine to turn off between two hosts, shared storage

    Dear Experts,

    Please guide me for the next case. There are two hosts of Esxi, host 1 is Esxi 4.0 and host 2 is Esxi 4.1. There are store data SAN storage that is visible to both hosts.

    I watched solard winds VM monitor utility that hosting 2 consumes 90% of the memory while its processor is ok. On host 1 is normal. So, I want to spend only a few VM of to host 1. So please correct me if what I think are OK. I will turn off the virtual machine to be moved from host 2. Then I it will remove host 2 inventory. Then on host 1, I'll go to the data store in the folder that VM and do a right click on the file 'say add to the inventory' and now I'm going to see this virtual machine in the inventory of the host list, just turn on and everything is perfect, is this correct?

    Second question on the same hosts, there are a few other data stores that are visible to a host. As if this is the case there is a virtual machine on a data store that is visible to host 2 and I want to spend this VM to host 1 to reduce load on host 2. How to move this virtual machine because this data store is not visible to host 1? Will I have to copy this VM files in a data store that is visible to host 1? If YES then what real required to copy files?

    Kindly help me.

    Kind regards

    From your description I m assuming that you use not vCenter to manage your hosts, correct?

    If you have a store of data shared between two hosts you can do the steps you descripte (power off, remove the inventory etc.).

    For your second case there are several ways, it depends on where you want to place the virtual machine in the future. Wouldn't be on the shared data store that already exists or can in the local data store on the other host? Or is there an option to also display the current data store to host 1?

    If you want to copy the VM files copy the whole folder of it.

    Kind regards

    Mario

  • Turn off iCloud, photo sharing

    On my iPhone I have iCloud library & My Photo off steam but iCloud Photo Sharing turned on.  To be honest, I don't know how iCloud Photo Sharing turned on - I do not use it.  I would like to disable now iCloud, photo sharing and return to the way it was with my own storage original iPhone. My question is, when I go to turn off button iCloud on my iPhone photo sharing, he says that it will remove pictures of Commons of my camera (which is now all the photos I have on my iPhone).  Is this really the case? Can't just go back to the way that was on the device front of iCloud, photo sharing has been enabled?

    iCloud photo sharing creates copies of your photos, if you turn it off the originals will always be there as long as you have not deleted or they aren't someone else first.

    If you disable the iCloud photo sharing, you can reactivate again and will return all pictures that have been deleted.

  • Centre network and sharing that network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything

    just noticed on my network and sharing center that the network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything thank you.

    If you do not share with another PC or XBOX Media Center, then your file and media sharing must be turned off.

  • Why can't turn off password protected sharing

    Why can't turn off password protected sharing?  I use a Vista SP2 64-bit computer.  When I try to turn it off, I uncheck the button but when I click on the app it changes again to on.  I googled this question and tried many solutions, but so far nothing has worked.

    I am connected to a home network.

    I tried to delete the guest account, enabled the guest account and set up a password for the guest account, which none helped.  I am alo tried to change the IPsec to the manual.  Finally, what makes the work was when I got to a page that seized me add an Everyone permissions. I don't remember how I arrived at this page, but after that I added the new authorization and returned to the page network and sharing, password protected sharing was turned off.

    Thank you for your help.

  • The setting of file sharing and printer in my LAN adapter is being turned off when I reboot. Why? What could be responsible for this?

    I put the file and printer for Microsoft Networks share on IT in my LAN adapter properties. When I reboot it has itself turned off.

    My PC running Windows 7 64 bit.
    With leader & Printer Sharing, I am able to access the files on another PC 32 bit Windows 7 and the PC can access mine. After a reboot of my PC is possible - file & print sharing has set itself off the power in the properties of the adapter on my PC (the other PC is still OK).

    In Control Panel / advanced sharing settings I also file and the specified printer sharing option - and which remains lit on a restart. But it seems that it is not enough to allow these two PC to see each other.

    When I turn on sharing in the properties of the adapter to the printer & file, the two computers can then see each other (restart is not required).

    On the other PC, file & printer sharing survives through a reboot without reinitialization.

    I removed the two PCs of our homegroup yesterday evening to try to identify where the rub.
    My PC is to use the standard Windows Firewall current t.

    It is an aspect of various strange problems, I was 'enjoying' with Windows 7.  Following suggestions of the other forums, I turned off of packages jiumbo and created a connectionid identical on both systems. The Intel web site confirms that I have the Intel network adapter driver.

    It's very strange. Any suggestion will be highly appreciated.

    I think that I found the cause of the problem.
    It is a Lenovo Thinkpad and it comes with 'Logins', software to help manage network connections.
    Buried deep in the settings is a security option disable file and printer sharing.  I disabled that and will test by restarting later.

  • How can I turn off the "always off-line" property on a specific folder or share?

    Hi, I use Windows 8 on two machines with a home group. On the smaller machine, I use Sync Center to keep an offline copy of some of the files that are stored on the big machine. I can then work on those out-of-home and sync when I come back. I do not use the cloud, just the home network.

    I can choose any folder and ask to be "always available offline". It works very well. But I can't turn this setting off. The cache on the smaller machine becomes too full so I want to selectively remove some of the files of it.

    I tried the following none of which:

    (1) in the file Explorer, right-click on the file and look at the context menu. There is no other choice "make always available online.
    (2) even again and look at the properties. There is a checkbox indicating "always available offline" and it is not gray - but it won't let me click on it. So I can't remove the tick from the box
    (3) in the file Explorer, select the file, and in the tab "Home" watching 'Easy Access'. The "always online" option is grayed out.

    No experience with this problem? It doesn't seem to appear in google searches

    Hi and thanks
    the problem seems to have "solved itself" and I will describe below the steps that I actually took.
    But first, just to clarify, this isn't (I think) a problem of skydrive, unless the policies and procedures of caching are the same regarding networked files (which I'd be interested to hear about). I'm not using skydrive. I'm just a home group in which wholesale laptop has two 500 GB drives and small laptop has a 250 GB drive. Great hosts of all mobile files for the House and a small laptop computer via a homegroup. Both machines are running Windows 8. I have improved in December to 8.1 and then is a complete Windows 8 resettlement, so that they are both pretty clean.

    "Access all offline files" is turned off on both machines, and all actions are defined to allow network users to decide which files they want to store online (I think this is the default)

    Just to complete the picture, it is the only user on each machine, which has administrative privileges on this computer.

    When away from home, small laptop can continue to use the shared files because while that connected small laptop, I mark it as "always available offline". Then when I come home, I just sync (with the network, not with SkyDrive shares). However, I have to do this selectively, because there is not enough room for all of them. So I just keep offline files copies I'll work on all away, about 34Gb.

    This solution is fine for me, I don't really have a use for Sky Drive yet.

    The problem is that while I can turn on "keep a copy offline" selectively, I couldn't turn off selectively. If one day I put a huge folder by mistake to be readable while offline and then discovered that offline files had gobbled up space on the drive of the laptop little almost all the. But I couldn't pass this backrest to remove from the cache offline files. The relevant menu options were all grayed out.

    In the world stopping or disabling 'offline files' did not help, because as soon as I have reactivated the, small laptop "remember" what she should be cached. I guess I could have reduced the cache space something much smaller, but then what I would do is remove the functionality that I needed because Sync would fall on complain there is not enough room.

    When I searched on the web, I found that it was possible in Windows 7 to reset the cache, by adding an extra key in the registry (see, for example, http://support.microsoft.com/kb/230738/en-us).

    But this doesn't seem to work in Windows 8 (see http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/how-to-re-initialize-the-offline-files-cache-and/9e785cc9-d8ad-42fc-b772-36ac01db18e4). So I wanted to know how to do the same trick in Windows 8

    What has worked (don't know too why) are the following steps:

    (1) the big laptop, move all the files that are used to be in the huge file in a temporary store
    (2) on big laptop, use the tab share offline on the properties of the file once - huge, to deny the user the right to keep a cache online.
    (3) make the shareable temporary store
    (3) close big laptop and restart
    (4) close the small laptop and restart
    (5) sync small computer laptop once again, making sure not to request a copy of the temporary Bank offline

    Grayed links seemed to 'wake up' and I was able to delete all cache offline except the files I wanted. But I have no idea why.

    Hope this helps someone, and I think it would be useful to publish, somewhere, a "how-to" article telling how to reset the offline files cache.

    Chiffchaff-faced apologies if the skydrive also corrects work for offline networking files.

    A

Maybe you are looking for

  • How can I see netflix on my apple first generation tv

    How can I see netflix on my apple first generation tv

  • Simulation of temperature

    This is a homework problem Yes, I have summer through readings and I can't figure out how to do this. We are able to use the temperature simulated in the activity file, I don't see where comes the thermometer and I want fills the degrees right now (F

  • error on windows vista \Device\Harddisk2\DR2

    I keep coming up with the error for many programs, I try to run, some wont even load due to this no matter how many times I click on try again or click on continue he keeps coming up with this error. Please find a solution to what its stopped me usin

  • Microtek scanmaker i320 driver

    Know of a driver that will make this useful scanner?  Microtek answer is to buy a new.  I scan maybe 2-3 pages per year... it is easier to keep a copy of XP available.  For Win 7 64 bit please

  • 2 downloads to one account?

    HelloI know that a single license entiles two facilities. ?For example, an installation on my Mac and the other on my windows PC.  This month I buy a new Mac, how do I manage to get the installation on my new Mac? Is it enough to remove the installti