Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Windows update does not install the updates below!

  I was informed of the following updates Windows Update didn't work: KB953297, KB973636, KB975958, KB973443, KB973705, KB973475, KB974554, & KB972580 I followed the instructions with free space for updates, but they still fail to download.  Why?

  Check to see if the service "Intelligent Service" background, "Cryptographic Service" and "Windows Update" work "services.msc" which you can launch from 'run' under the start menu. Also check the error message Windows runs from the 'Windowsupdate.log file', which you can follow the article http://support.microsoft.com/?kbid=902093

  You can also try the measures available to the title of article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602.

  Thank you.

• Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year; want a more recent version.

  Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year (February 11, 2013); want a more recent version.

  Cannot find a lot on the standalone viewer, except in the docs of Flash Builder, who says a .swf can specify to use. I can't find a download link.

  Thank you, Doug

  You can download the standalone player (projector) since https://www.adobe.com/support/flashplayer/downloads.html

  Note that the download is the player, not an installer, you will need to manually .swf file association.

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• My Windows Installer does not work and I want to reinstall Windows. How can I do this?

  original title: Windows install

  My windows installer does not work. How can I reinstall my operating system?

  You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

  Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

  Hello Monica and DuaneWolfe,.
   
  
  Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
  
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-the-Windows-Installer-service-could-not-be/354c393e-CCCA-42AD-9952-4aa70bfdb336
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.

  
  Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• Impossible to uninstall the windows installer does not properly

  I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support

  Have you tried to install the latest version of Windows Installer?

  Otherwise, try to run the following from start-> Run:
    msiexec /unregserver
  Then,
  msiexec/regserver
  
  
  
  

• Windows Installer does not work... Windows 7 Home Premium 64-bit

  Hello!

  I am unable to get the windows installer to run.  I get the message:

  "The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Contact your support team. »

  The Windows Installer program can be repaired or replaced?  I couldn't find a download version for my operating system.

  Any suggestions would be greatly appreciated.  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?