Win 7 VPN client cannot access remote resources beyond the VPN server
I have a Win 7 laptop with work and customer Win 7 VPN set up, and through it that I can access everything allowed resources on the remote network.
I built a new computer, set up the Win 7 client with the exact same parameters everywhere, connected to the VPN with success, but can not access any of the resources on the remote network that I can on my laptop.
Win 7 64 bit SP 1
I did research online and suggestions have already had reason of my new set up. In addition, I have a second computer that I've set up the VPN client, and I'm having the same problem. VPN connects successfully, but is unable to access the resources.
Tested with firewall off the coast.
Troubleshooting Diagnostic reports: your computer seems to be configured correctly, distance resources detected, but not answered do not.
I created another VPN client on the new computer to another remote network and everything works perfectly.
Remember the old VPN connection to the remote network that does not work on the new computer works perfectly on Win 7 64 bit laptop computer.
So, what do I find also different between identical configurations "should be" where we work and two new machines is not?
It must be something stupid.
Hello
This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking
Please let us know if you have more queries on Windows.
Tags: Windows
Similar Questions
-
Cannot access remote resources - Cisco VPN Client
I'm having a problem with my Cisco VPN Client. I am new to VPN configuration, so this is probably something easy I'm missing. I have a my internet gateway for my LAN 2611XM router and my VPN server. I do all my tests of a society with a high card laptop mobile broadband. VPN connects, but anytime I ping anything in the network Cabinet, he returned with the public IP address of the external interface. I have NAT overload configured so any network can access the internet, inside which it looks like may be causing my problem. I don't know how to fix it. My config running is attatched. No one knows what might happen.
Oh, almost forgot to add. When I remove the nat overload on my interface fa0/1, the vpn will connect to any resource on the inside.
Your nat configuration seems to be the origin of the problem. If you are using an ACL to match the source for NAT, then it will be necessary to add the line 1A refuse for the local ip pool for your vpn clients to one only. try that to see how it goes.
Sent by Cisco Support technique iPhone App
-
VPN clients cannot access remote sites - PIX, routing problem?
I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)
Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.
Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.
Very good and works very well.
When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.
However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.
On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.
Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?
(Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)
with pix v6, no traffic is allowed to redirect to the same interface.
for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.
with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".
-
SOLVED: PC Windows 7 cannot access remote shares or the
Head, meet wall. Wall, meet the leader.
I have a W7/64 PC that cannot access network shares. He has been installed from the original CD (simple installation) but never worked. Resettlement is not a preferred option because the client already has tons of data and applications on it.
Other machines can access the local shares of this PC, but it can access any remote shares (on any other PC W7) or his own - in short customer service around file sharing does not work properly, although this machine can see all available actions... She just can't access. Other PC can access machines that cannot do this. Ping works fine in all cases.
"Remote machines appear in the list of"Network"in Windows Explorer, but trying to access them produces an error: the specified network provider name is invalid.
No software anti-virus or firewall is currently installed or running.
Troubleshooting output (the local computer is named GARRYDMK-PC):
-[snip]-
Trying to NET USE shares on the local computer:
View C:\Windows\System32>net
Server name remark
--------------------------------------------------------
\\SERVER
\\DEREK-PC
\\GARRYDMK-PC
\\RECEPTION
\\WAYNE-PC
The command completed successfully.View C:\Windows\System32>NET \\garrydmk-pc
Shared resources to the \\garrydmk-pcShare name Type used as comment
--------------------------------------------------------
Canon iP4200 print Canon iP4200
Romeo & Juliet disc
Shared disk
Users drive
VIDEO_TS disc
The command completed successfully.C:\Windows\System32>net use g: \\garrydmk-pc\Shared
The workstation service has not been started.More help is available by typing NET HELPMSG 2138.
C:\Windows\System32>net start workstation
The requested service has already been started.More help is available by typing NET HELPMSG 2182.
C:\Windows\System32>net view \\server
Shared resources to \\serverShare name Type used as comment
------------------------------------------------------
Disc of company Documents
COMPUTERS-software disk
The command completed successfully.C:\Windows\System32>net use g: \\\server\Company Documents.
The workstation service has not been started.More help is available by typing NET HELPMSG 2138.
-[/snip]-
I'm trying to access here to all actions are available to all other machines of W7 in the network. (All machines are W7 boxes).
Note how the workstation service is said not having started, but in fact has already started summer (which I checked in the list of services). In short, this does not appear be related to a service does not...
I went through all the standard movements as posted on the Interwebs, including the verification of services, local policies, home groups, convenience stores, and which do not. Note that I tried to start the workstation service via a DOS box as an administrator; If I'm not I get a "system error 5 has occurred" and and "access denied".
In short, I am completely puzzled. I start the troubleshooting of this PC, but now I want to just pull it. Please help before something bad happens... :-)
Any suggestions would be greatly appreciated!
FvW
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
Hope this information is useful.
-
View client cannot access virtual office over the Internet
Hi all:
we can access a virtual desktop by IE Internet. https://202.XX.XX.XX:443 . Virtual office works very well.
However, when we try to office virtual login of client from view in the same situation. virtual desktop screen turns black and then this session is dispeared.
All ports should activated?
Thank you in advance.
hihiy
Hello
Maybe this article can help you with your problem.
MCP, VCP
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
-
The VPN Clients cannot access any internal address
Without a doubt need help from an expert on this one...
Attempting to define a client access on an ASA 5520 VPN that was used only as a
Firewall so far. The ASA has been recently updated to Version 7.2 (4).
Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot
ping any address on internal networks, or even the inside interface of the ASA.
(I hope) Relevant details:
(1) the tunnel seems to be upward. Customers are the authenticated by the SAA and
are able to connect.
(2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it
appears that the packets are décapsulés and decrypted, but NOT encapsulated or
encrypted (see the output of "sh crypto ipsec his ' home).
(3) by the other related posts, we've added commands associated with inversion of NAT (crypto
ISAKMP nat-traversal 20
crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our
Configuration.
(4) we tried encapsulation TCP and UDP encapsulation with experimental client
profiles: same result in both cases.
(5) if I (attempt) ping to an internal IP address of the connected customer, the
real-time log entries ASA show the installation and dismantling of the ICMP requests to the
the inner target customer.
(6) the capture of packets to the internal address (one that we try to do a ping of the)
VPN client) shows that the ICMP request has been received and answered. (See attachment
shooting).
(7) our goal is to create about 10 VPN client of different profiles, each with
different combinations of access to the internal VLAN or DMZ VLAN. We do not have
preferences for the type of encryption or method, as long as it is safe and it works: that
said, do not hesitate to recommend a different approach altogether.
We have tried everything we can think of, so any help or advice would be greatly
Sanitized the ASA configuration is also attached.
appreciated!
Thank you!
It should be the last step :)
on 6509
IP route 172.16.100.0 255.255.255.0 172.16.20.2
and ASA
no road inside 172.16.40.0 255.255.255.0 172.16.20.2
-
AnyConnect client cannot access external sites
I am installing AnyConnect VPN with no split tunneling. ASA 5505 v8.2. It seems that it should be really easy. I must be missing something.
I can get AnyConnect users to connect very well and they can access internal sites and on other sites in IPSec tunnel. But no access to internet.
Internal 10.1.1.x pool VPN is 10.1.1.251 - 253 (list of Temp for the test). I have published the following plotter:
packet-tracer input outside tcp 10.1.1.253 12345 69.147.125.65 80 detailed
The last reported point (where it fails) is:
Phase: 7
Type: WEBVPN-SVC
Subtype: in
Result: DROP
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xda7e9808, priority=70, domain=svc-ib-tunnel-flow, deny=false
hits=364, user_data=0xcb000, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip=TempVPNPool3, mask=255.255.255.255, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Which means by SVC-WEBVPN?
A relevant config:
No ACLs, filters or limitations of policy group on HQ customers.
Security-same permit intra-interface
Global 1 interface (outside)On advice, I've added: nat (outside) 1 10.1.1.0 255.255.255.0, then I can get no tunnel guests outside guests, but then no IPSec.
Kind of a weird, that with this, the tracer of package does not change. Continue to deny shows, but the site is accessible.
When you say tunnel IPsec sites... is that the tunnels IPsec Site to Site on the SAA?
The command:
NAT (outside) 1 10.1.1.0 255.255.255.0
It should allow the AnyConnect customer pool for PATed to Internet.
If you need clients AnyConnect to access the Internet and the access to remote IPsec tunnels as well, you can do it with policy NAT:
access-list anyconnect deny ip 10.1.1.0 255.255.255.0 x.x.x.x
access-list anyconnect deny ip 10.1.1.0 255.255.255.0 y.y.y.y
access-list allowed anyconnect ip 10.1.1.0 255.255.255.0 any
NAT (outside) 1 access list anyconnect
Global 1 interface (outside)
With the above configuration, you are bypassing NAT for AnyConnect customers when they want to access remote sites through the IPsec tunnels (assuming that x.x.x.x and y.y.y.y for remote networks through these tunnels).
And the rest of the AnyConnect (10.1.1.0/24) pool will be PATed to Internet.
Federico.
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Sail back to a remote resource in the Visual Studio plug-in
Environment: 32-bit Windows 7, latest development environment Sun's Java, Visual Studio 8 most recent plugin beta BlackBerry 9700 Simulator works very well in the white list remote .NET/ASP/SQL Server 2008 to use as remote as possibly .asp page direct service calls, XMLHTTP and server applications.
I built a skeleton plugin widget. It has 7 menu options that call a message box to confirm the menu item pulled. The menus are loaded from JavaScript on the onload of the index.htm. I can navigate to a remote resource using the blackberry.ui.menu function which sets the location.href. The remote site was whitelisted, so he gets up, badly formatted, but it is another question.
After navigating to this remote web page using location.href... blackberry.ui.menu items still show, but they died, probably out of context. They don't pull the confirmation message boxes as they do since the start of the page index.htm, and there is no way to return from the remote page back to the local index.htm.page. At least not in the menu items.
I tried adding permissions to the resource for blackberry.ui.menu and a lot of other elements in the config.xml file and nothing seems to help. I have tried on the menu add a htpp:///index.htm 3 slashes to return to the local resource I've seen in other posts, but since the menu, I think, is out of context, it ignores or simply impossible to find the function.
Any suggestions?
I need to change the remote web site and handle menu events?
Is it possible to make menu items available to the application in the world so it doesn't matter where I go, the menus are always available?
I don't know what to try next.
Kind regards
Scott
If you want that menu items that are used around the world for local and remote content, you will have a link in a JavaScript file in each of these occasions and save your menu items.
It is a bug that the menu items are persistent after you navigate to another page. You can work around either by:
(1) delete the menu items before moving on to the next page
(2) on the loading of the next page, clear the menu items.
If you change the location.href, and then use the back button on the device, it should return to the previous page in history.
-
Cannot access Windows Gadgets because the message only the administrator is permitted.
Original title:
I am logged on as administrator (only 1 person on this computer) but I get messages that only an administrator can access some files (for example the Windows Gadgets))
I have Windows 7 Ultimate, only one person has this computer (me), I installed as admin (no other account on this computer). Cannot access Windows Gadgets because the message only the administrator is permitted. I AM THE ADMINISTRATOR! Why is this happening?
Hello
1. you only receive the error message when you try to access the "Windows Gadgets"? What is the full error received?
2 have you made any changes to the computer before the show?
Method 1:
Step 1:
Check if you are able to access to the files and programs into account administrator in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Restart the computer to return to normal mode
Step 2:
If you are able to access all files and programs to the account administrator in safe mode then I suggest that you create a new user to the administrator.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Method 2: Try the steps from the following link and check:
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
-
Hello
I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases. Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.The error in the log file of report Service:Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)Any ideas?Thank you.-PhilJust, I solved the problem I had.
It turns out, there, there were two questions... first concealing the second.
SQL Web browser has not been activated. solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.
Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server. This works.
Everything unfolds right now.
-
Is node/host usually means a client computer or it means that the window Server computer?
Is node/host usually means a client computer or it means that the window Server computer?
Hi stuckfree,
The question you posted would be better suited for the TechNet community. Please refer to the link and post your request for more information.
-
original title: error number: 0x800CCCD2
Can anyone help with this issue:
Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2
Thank you!
Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.
Best, Douglas
-
Cannot access network resources - Cisco VPN client
Please see attached the network topology.
I can connect using the Cisco VPN client and access to all resources of the 192.168.3.0 network
I can't ping / access to all hosts on the network 192.168.5.0.
Any ideas?
Thanks for the help in advance
AD
Quite correct.
Please add has the access list:
CPA list standard access allowed 192.168.5.0 255.255.255.0
Maybe you are looking for
-
Re: Tecra M11 - cursor jumps to random locaation when entering
Does anyone know how to turn off the trackpad when you use a mouse, or advise on what the problem is - when I type happily away and I'm fast enough, I suddenly find I type in the middle of what I typed already, instead of at the end of the line as us
-
Hello My sister has a HP dv6-1234se model number. When she is on, it does not go beyond the Welcome screen that says HP press escape... at startup. the warranty has expired. I need to know if we should be investing in a new laptop or if the damage is
-
My wife has a hotmail account that she has actively used for years. In recent days, she can't access her e-mail to * address email is removed from the privacy *. Trying to connect gives a message "The Windows Live ID is incorrect" and it cannot reset
-
account temporarily suspended and groups of invitations.
y at-it sort of can I send invitations to my client without being as spam in hotmail... incidentally that my account has been temporarily suspended for 24 hours now and I have got it on all my advertising materials. How long before you can start usin
-
My Windows Movie Maker collapsed in response. How can I save my project?
I worked on this project for five hours, and I need it for a class. I don't want to redue it again, because its 10 min long. I finished it all, except the credit end. I really need to save it so I don't lose. Help, please.