Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

Similar Questions

• I'm having a problem of system image backup. Whenever I try a backup I get the following response "there is not enough disk space to create the volume shadow copy on the storage location.

  I use Windows 7 Pro.  My target drive is drive ext WD 2 TB MY PASSPORT and my source drive is an internal 1 TB WD drive, I also tried to make a copy of the image using a 3 TB external drive Seagate Replica.  Two targets readers have had a least 1.5 TB of free space.  The source drive has 720 GB of free space.  My computer has 16 GB of memory.  In addition, while I am now using Windows backup and restore I tried also to use the Seagate Software.  I was able to make a copy of clone of my partition to the C drive on a 1 TB Passport drive

  [Moved frm comments]

  Hi Steve,.

  You get an error code?

  This error comes usually when the system reserved 100 MB hidden partition created by Windows 7 does not have enough space to store a cliché. Please check the free space on this volume. Follow the following steps:

  I suggest you perform the steps mentioned in this similar discussion.

  Not enough space on the backup discs to use VSS.

  http://social.technet.Microsoft.com/forums/Windows/en-us/b3b6ec73-A747-4025-9397-4e9c7fd1c24e/not-enough-space-on-drives-for-backup-to-use-VSS

  Hope this information helps. Response with status so that we can help you.

• Limit Max SGA on Oracle 9.2.0.8 on Win Server 2003 SP2 (32-bit)

  I am trying to increase the total SGA to 4 GB on an instance Oracle 9.2.0.8 on Win Server 2003 SP2 32 bit version. Is this possible? I tried to find something on google and metalink but has not found any post answering my question.
  
  In my attempts:
  I did 4 or 5 attempts every time try a step further, as explained below. On the issue of a start command, whenever I get the following error and the instance would not start.
  ORA-27100: memory realm already exists to shared
  
  (1) I changed the sga_max_size in the spfile to 4 GB using
  * "alter system set sga_max_size = 4294967296 scope = spfile" * "
  & stop instance successfully. It will not re-start and ORA-27100 I.
  (2) I stopped and restarted Windows Oracle service using the Task Manager, but no luck and I have seen the same error.
  (3) I tried to restart the server, but that did not help either and I got the same error.
  
  Whenever I have to start the instance with the ORA (pfile) init file and recreate the spfile to restore the old settings.
  
  Links or suggestions?

  On Note: 225349.1, it is stated that you need to use ' / EAP ", or" / 3 GB/PAE "switches to the boot.ini file, but there is a restriction:
  "It is important to note that this extra memory can ONLY be used by Oracle in the form of an increase in the value for.
  DB_BLOCK_BUFFERS.
  Read the Note: 373602.1 is also recommended, he concludes:
  "It should be noted that this is at best a short-term band-aid and the.
  real long-term solution is to upgrade to a version of operating system 64-bit"

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

• Unable to backup because of the volume shadow copy error 0 x 80042302

  Hi all

  I'm trying to backup to an external hard drive and I keep getting the error 0 x 80042302. It is said that "a volume shadow copy service has met an unexpected error.check the applications for more information event log"
  I did what the other threads have said services and shall ensure that the shadow copy service and the service backup Windows are automatic and started but still nothing. I also ran a check with run with the/scannow command but nothing... I really need help everything would be appreciated.

  Hey kiran thanks a lot.

  I talked to my uncle today who knows a little about the PC and he said that it maybe the tune up utilities that could be the problem. with some services that it turns off, it may have caused a problem. I uninstalled it but still nothing... so I watched your first suggestion that was the very audience who gave a more detailed error code. I then googled that error code that led me to believe that there is another service "Microsoft Software Shadow Copy provider (SWPRV)" which I had not enabled and once I did here! its market so now my message would simply be that you should be careful with programs that take control of the pc! Thank you very much!

• Win Server 2003 Sp2, "port 808 is in use"

  I tried to install Oracle XE 11.2 (after the abduction of Oracle XE 10.2) and I get this error "Port 808 is in use... ", but I get this error for any port I choose...
  
  How to solve this problem?
  
  concerning

  Also, make sure that there is no antivirus or anti-malware software.

• Hi I was just wondering I play GTA IV and most recently an error return continually in the appearance of game the game at the end. The error is (GTA IV FATAL ERROR: OUT OF VIDEO MEMORY).

  Any help would be much appreciated

  Try to update the display drivers and check. Also check the compatibility of devices (graphics card) display in the Web site for the application.

• ESX 4.1, Win Server 2003, ESET NOD32 Server Admin

  Greetings!

  I moved my ESET NOD32 physical server so that it became a virtual machine running on ESX v4.1

  I used the VShpere customer, importing machine tools to achieve this.

  My virtual machine sees the network and the internet very well and has

  no significant errors in the server log.  It is currently running Win serv 2003.

  My ESET NOD32 client machines (PC, servers) now States, the server cannot be contacted.

  We will use the default port, 2223 for admin server for example.

  The Windows Firewall is DISABLED on the server of ESET NOD32.

  Is there something in ESX / VSphere that prevents certain ports to be used? A place for 'open port '?

  RSVP

  Thanks in advance...

  Checking configuration of the customer as a client to connect to the ADI of server - name or ip address, verify a network connection to the server (ping), also check the status of the blink of an eye on the Server service.

  ESXi is not any firewall between VM and the rest of the network.

• Win server 2003 machine starts file system error

  My Win Server 2003 has suddenly got a C:\Windows\System32\system file is missing or corrupt error. We were able to replace the file in the repair folder and got the server up and running.

  However, Active Directory seems to have disappeared. The server has not yet a domain listed in AC. All entries are simply not there.
  How is it possible and how can pick us up or recreate AC? A backup copy of the AC, unfortunately, had not been done.
  Any help is appreciated.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your question in the Technet Forum. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• WIN server 2003 and CF administrator

  I installed my server. Another is running WIN Server 2003 instead of the old Server 2000. I upgraded to 8.0 with all patches. I'm currently running Sun Java 6 (update 3). When I click a button 'Browse' in the cgi Director the browser closes. The fix for this knowledge?

  The problem turned out to be the Java JRE version. I uninstalled Java 6 and installed 1.4.05 and the problem solved.

• Essbase 9.3.1 and Windows Server 2003 SP2

  Is anyone Essbase 9.3.1 successfully under Windows Server 2003 SP2?
  
  The documentation I have mentions only SP1, but we would like to upgrade to SP2 providing that there is no problems to do.
  
  Thank you
  
  Svejk

  There is no problem running on SP2.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Driver Officejet 4620 Win Server 2003 32 bits

  I want to install the Officejet 4620 in my network with a Win 2003 (32 bit) server, is there a driver, I can use?

  Hello

  I see that you have a question about a certain driver for Win Server 2003. Unfortunately, there is not a driver available for it, but you can install an alternate driver such as the 990 c driver.

  You can follow this thread made Shane and install the 990 c driver.

• Unable to connect to win 7 ultimate laptop for win server 2003 r2

  I have win server 2003 r2 ent to connect to the internet through a router - wired.

  Win 7 laptop holiday connected wireless to the router.

  I am not able to connect win 7 to the server.  I can RDP server on the laptop.

  I tried to connect laptop plugged into the router, wireless disconect and see if I could connect to the server. no luck.

  any help is appreciated.

  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  It will be useful.

• Net work with Win Server 2003 Logon

  I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system?  are there procedures that could help maintain the system in his?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio