Win32k.sys

Similar Questions

• How can I stop getting the win32k.sys error blue screen?

  This computer in the Shop 3 times ($$$) and still not fixed.

  . I've updated drivers, corrected the registry errors, changed the CMOS battery, had card mother replacement and addition of RAM maximum.

  Thank you

  David

  Hi, David,.

  Check the solutions proposed here

  W7 Bluescreen: system_service_exception

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/ad2b7744-4118-4e36-9d79-9ba25e73318e

  http://www.howtofixbluescreenofdeath.com/Win32k-sys-blue-screen/

  http://www.SevenForums.com/crashes-debugging/39979-BSOD-Win32k-sys.html

• Win32k.sys BSOD Intermittent problem

  I got a problem for several months with my computer all of a sudden stop and will the BSOD. The problem seems to occur when something on the InterNet, such as; From IE8/Google Chrome, access to a new tab, using the link that begins the new tab, change the pages and even beginner Email (Outlook Express). My system, in its current form, has run flawlessly since 2009. The complaint of BS is still the same: PAGE_FAULT_IN_NONPAGED_AREA, then that indicates a problem with win32k.sys. This question IS NOT preceded by a power interruption. I have a genuine XP installation with Service Pack 2 CD (because it is upgraded to SP3).

  I tried to find the fault using MemTest 86 (boot from CD when you run the test) and my RAM memory test. No defects found in 10 run tests.
  I had once an indication that there may be a flaw in Z: drive.  Drive Z: is a physically separated, HD 20 GB which stores much of the things of the InterNet as cookies, graphics, etc., and all files downloaded from the InterNet are stored on this drive (to avoid infecting my system drive). I ran CHECKDISK tool with Scan for and attempt recovery of bad sectors checked options and Auto-Fix file system errors. Connected the CHKDSK boot by following the instructions. No problems found.
  I also use CCleaner v4.09 to remove most of the detritus left by the InterNet (especially on drive Z :) and also check the register of questions.
  I have also four Minidump.DMP zipped files (using 7-Zip [file .7z]), but do not have the installation on this page to send the files damaged by arches. I file before, but not SkyNet or whatever is the sharing of files also mentioned elsewhere.

  System Specs:

  Make & model: Auto built in 2008

  Motherboard: ASRock 4Core1600-D800

  Processor: Intel Celeron CPU 430 @ 1.8 GHz, pin 775

  RAM: 3.0 GB of installed Ram (2 sticks [?])

  Video: ATI Radeon HD 2600 Pro (256 MB RAM DDR2)

  DVD installed: HL-DT-ST DVDRAM GH24NS90 R / W DVD

  System:

  WINDOWS XP HOME v2002 SP3 + w/SP2

  Antivirus: Trend Micro Titanium

  News of the blue screen:

  PAGE_FAULT_IN_NONPAGED_AREA

  STOP: 0X0000008E (0XC0000005, 0XBF905FAE, 0XA8BA29F8, 0X00000000)

  WIN32K. SYS - ADDRESS BF9005AFE BASE AT BF800000, time STAMP: 521ea476

  Has occurred @ 10:10, 04/12/13

  #2

  PAGE_FAULT_IN_NONPAGED_AREA

  STOP: 0 X 00000050 (0XE15F001C, 0X00000001, 0X00000000, 0XBF84B3D0)

  WIN32K. SYS - ADDRESS BF84B3D0 BASE AT BF800000, time STAMP: 52706e3f

  Was held on 15/12/13

  Proteus

  Worked well but had to respond to survey questions to continue.

  It was final but related to memory.  I doubt it's the memory itself, so I'd start by Driver Verifier.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  1-Memtest. (You can read about running memtest here)

  2-Driver Verifier (for full instructions, see our wiki here)
  
  
  If you encounter problems or get stuck at any point, feel free to ask questions
  
  
  If you are unable to Windows because it crashes too early, try safe mode.
  
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
  Co-written by JMH3143

• STOP: 0x0000008E (0xC0000005, 0xBF9568C8, 0xA6864C00, 0x00000000) win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

  Hi, I get a blue screen frequently with the below error message.
  "Technical information:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  
  
  STOP: 0X0000008E (0XC0000005, 0XBF9568C8, 0XA6864C00, 0X00000000)
  Win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633
  
  
  Beginning physical memory dump.
  Complete physical memory dump.
  For more assistance, contact your system administrator or technical support.  "
  I am using Packard bell Easynote MX45.
  XP Home edition Version 2002
  SP3
  Inter (R) CPU [email protected] GHz.
  3 GB Ram
  could someone help me fix it please.

  N

  You are better able to tell us if the problem is resolved.  Continue to run Malwarebytes about once a week.  If the BSOD ceased and MBAM does not show any other infection, you're probably good.

• Blue screen... STOP: 0x0000008E (0xC0000005, 0xBF8B6C11, 0xA9538368, 0x00000000) win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  I have a Dimension 3000 bought in 2005, upgraded to 2 GB of RAM.

  I recently implemented almost from scratch, because Opera program and profile would be repeatedly corrupted, making me lose the email. (This reappeared even after reinstall opera clean, do not use old messages or other profile files). Therefore, I restored a backup of the C: partition Ghost (there are others for my data and downloads) I did shortly after the purchase, after which I had installed only Ghost and two games (I uninstalled the games). I installed SP3 and ran Microsoft Update. I was trying to reinstall other programs that I use now. It's Rhapsody; one of my kids 'synchronize' a player MP3 Sansa Fuze with Rhapsody.

  A few days ago when closing Internet Explorer, I got a message that should be closed and I could send a report to Microsoft. It is also used to happen before, from time to time.

  Then, more recently, when I closed Rhapsody, I got a blue screen with a message that there was a problem. He said I could try to change some settings in the BIOS. I remember what happens before I restored the ghost of 2005 BU. I looked in the BIOS and not able to find the parameters referred to in (something like memory cache). I wish it were possible to print these messages on a blue screen. I didn't copy the entire message, but I write these references:

  STOP: 0X0000008E (0XC0000005, 0XBF8B6C11, 0XA9538368, 0X00000000)

  Win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  This means almost nothing to me. I hope that someone on the forum knows what this means and can suggest what could be the problem.

  So far, I have not had more wrong with Opera, so there may be two distinct problems. OTOH, I reinstalled only Opera on 10/12/10; I can still have problems with it.
  

  Hello

  Here is more information on the bug 0x8E control: http://support.microsoft.com/kb/945658/

  The 0x8E KERNEL_MODE_EXCEPTION_NOT_HANDLED can be caused by a faulty service/driver, damaged hard drive or defective display card not enough space, or memory, Hardware/software incompatibility and third-party remote control software. So to get started:

  1. test your memory. Run Memtest you can download from http://www.memtest.org/#downiso. Download the ZIP file, extract the ISO and write on CD. Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run by at least 3 passes or until it gives errors. If you have more than 1 memory module, run the test on each module separately. Try running Memtest from a cold - start unplug your PC for an hour to cool down, then immediately run memtest again when you next turn on the. This way memtest will run when the memory is cool and after the 3rd pass when the memory is hottest.

  2. update your display driver. Reference Dell seems to have highlighted 3 different models of Dimension 3000 and so there is 3 different Intel display drivers. See if you can find an updated driver on the Intel Web site. If you use a graphics add-on card try to find an updated driver from the manufacturer's website. If you have any trouble finding a driver let us know what brand and model of graphics card you have.

  3. update the Rhapsody software. (I think it's the software you using http://www.rhapsody.com/-software ?). If it's Rhapsody software I think it seems to integrate into your Web browser and it's perhaps why Opera and now IE are mistakes? You can uninstall Rhapsody for a while just to see if it is the reason for your BSOD.

  4. when the 0x8E BSOD is caused by win32k.sys, yours, is it then possible, it is caused by control software remote third. It can include programs such as VNC, PCAnywhere, etc. of Teamviewer, RAdmin.  If you use one of these programs, uninstall it and see if the PC stops mistakes.

  5 run a scan on your hard drive. You can check your hard disk for errors by going toStart ->Run -> type chkdsk c: /r -> clickOk . When asked if you want to force a sayNodisassembly. When asked to plan the audit at the next startup, Yes. Reboot your PC to allow running chkdsk.

  Alternatively, you can run a diagnostic on your hard drive. This by downloading the diagnostic program from your hard disk manufacturer. A list of manufacturers and their diagnostic tools can be found here: http://www.tacktech.com/display.cfm?ttid=287. Once more, download the ZIP file, extract the ISO and write to CD. A time written on CD, boot your PC with the CD and run the test Advanced/extended.

  Also make sure you have enough hard disk space. It is always recommended, if possible, to have at least 15% of your free hard disk capacity.

  6. Finally, take a look in your event viewer when the BSOD for possible errors. You want to look especially in the system and Application logs (and maybe Internet Explorer connects). You can run Event Viewer by going toStart ->Run -> type eventvwr.msc -> pressOk -> event viewer screen opens. If there are errors listed in one of the newspapers type them in your next post if you are not right.

  Reading your post I see 3 specific issues, that you might want to focus:

  -The memory you added (run Memtest) and hard drive (run Chkdsk)

  -The Rhapsody program - try to update or uninstall.

  -The software was initially corrupted until you make the first image after the purchase. So you just ghost the problem on.

  I hope this helps. Good luck.

• STOP 0x0000008E in win32k.sys after update may 15

  Running XP Pro 32-bit on Dell Latitude D830 laptop computer.

  Receive a STOP 0x0000008E in win32k.sys for the first time ever today - may 17, 2012.
  Watching updates of security that has taken place and have been installed on my machine, on 15 may (2 days), I see that at least one of these updates installed a new copy of win32k.sys
  The latest version is dated April 11, 2012 14:12:06 (hour GMT)
  And the size of the file is 1 862 272 bytes
  Also has anyone seen this problem?

  Hello

  I suggest you to follow these steps and check if the problem persists.

  Step 1:

  Perform the System Restore to the point before the update and refrain from settling the problem causing updated in the future unless it is important.

  Step 2:

  You can try this "hotfix" "" and check if this solves the problem.

  http://support.Microsoft.com/kb/834450

• laptop won't start windows xp up.error win32k.sys?

  My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

  Claire

  As you probably know Evesham closed to the public in 2008.

  I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

  Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

  I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

  As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

  If a factory restore does not work I would then test the memory.

• Run Windows XP. is problem win32k.sys address: base BF821E12 at BF800000, Datestamp 4bdd0c20

  Machine started this last week.  The title is exactly what I get.  Windows update does not.  Stripper Macious tool will not install.

  Tried to install sp3 to see if that could fix the problem, but it would not install say could only install the most recent sp1.

  Win32k.sys address problem: base BF821E12 at BF800000, Datestamp 4bdd0c20

  then the full dump

  Hi VeldaHooper,

  1. when exactly you will receive this error?

  2. what happens when you install updates?

  3. you receive an error when you install the malicious software removal tool?

  4. What is the exact error you get when you install Service Pack 3?

  Step 1: Check the version of the Service Pack installed on the computer.

  Step 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Step 3: Check to see if this article helps you.

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• Blue screen with win32k.sys

  Hello

  I have a blue screen in vista and do not know why, would you have an idea?

  My minidump file is here: https://skydrive.live.com/redir?resid=1872AFA84B39A1FF! 112 & authkey =! AKVJyN2tsgCGsUY

  last blue screen, like BlueScreenView:

  Mini091413 - 01.dmp KERNEL_MODE_EXCEPTION_NOT_HANDLED 0x1000008e 0xc0000005 0x96eb4ee8 0x814e1ae0 14/09/2013-23:35:20 0 x 00000000 win32k.sys win32k.sys + 94ee8 driver Win32 multi-user operating system Microsoft® Windows® Microsoft Corporation 6.0.6000.16386 (vista_rtm.061101 - 2205) 32-bit win32k.sys + 94ee8 + 128995 win32k.sys win32k.sys + eab25 win32k.sys + eaca6 C:\Windows\Minidump\Mini091413-01.dmp 2 6002 143 192 14/09/2013 23:36:43

  It seems also apparent in 'win32k.sys + 94ee8' & 'ntkrnlpa.exe + ff0abcdc' (in BlueScreenView)...

  Thanks in advance :-)

  Chrome has initialized the call that crashed. Looking at the call stack, it seems to be releasing a police in memory that is not or no longer exists.

  Chrome update, update drivers video (and possibly print drivers). You use a third-party program of fonts?

  I'm not Chrome, but IE has trouble shooting modes such as disabling addons.

  See https://support.google.com/chrome/answer/187443?hl=en

  https://support.Google.com/chrome/answer/3296214?hl=en

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 96eb4ee8, the address that the exception occurred at
  Arg3: 814e1ae0, frame trap
  Arg4: 00000000

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.

  FAULTING_IP:
  Win32k! PFEOBJ::vFreepfdg + 4 has
  96eb4ee8 66f741200080 test word ptr [ecx + 20 h], 8000 h

  TRAP_FRAME: 814e1ae0-(.trap 0xffffffff814e1ae0)
  ErrCode = 00000000
  EAX = ff4b70b8 ebx = 00000000 ecx = 0010291a edx = 00000000 esi = 814e1b78 edi = ff4d50c8
  EIP = 96eb4ee8 esp = 814e1b54 ebp = 814e1b64 iopl = 0 nv up ei pl nz na po cy
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010203
  Win32k! PFEOBJ::vFreepfdg + 0x4a:
  96eb4ee8 66f741200080 test word ptr [ecx + 20 h], 8000 h ds:0023:0010293 a =?
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X8E

  Nom_processus: chrome.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 96f48995 to 96eb4ee8

  STACK_TEXT:
  814e1b64 96f48995 fa7334c0 00000000 00000000 win32k! PFEOBJ::vFreepfdg + 0x4a
  814e1b84 96f0ab25 00000001 00000000 00000000 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  814e1bbc 96f0aca6 814e1be0 ff504a7c 00000000 win32k! vRestartKillRFONTList + 0x7b
  814e1bf0 96ebfc96 ff504a7c 00000003 00000000 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  814e1c1c 96ebf898 fb7dc308 00000000 00000000 win32k! vCleanupPrivateFonts + 0x4d
  814e1c34 96ebc02d fb7dc308 00000000 00000000 win32k! NtGdiCloseProcess + 0x16c
  814e1c54 96ebbb6c fb7dc308 8ccc2030 00000000 win32k! GdiProcessCallout + 0 x 145
  814e1c70 8264ea48 861b3d90 00000000 06C 06974 win32k! W32pProcessCallout + 0x5d
  814e1cdc 8262b47f 00000000 86271d 78 86271d 01 nt! PspExitThread + 0x4a0
  814e1cf4 824e9e8e aaaacf60 814e1d20 814e1d2c nt! PsExitSpecialApc + 0 x 22
  814e1d4c d 82480 00000000 00000001 42 814e1d64 nt! KiDeliverApc + 0x1dc
  814e1d4c d 77635 00000000 00000001 14 814e1d64 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x77635d14 001ef7dc

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! PFEOBJ::vFreepfdg + 4 has
  96eb4ee8 66f741200080 test word ptr [ecx + 20 h], 8000 h

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: win32k! PFEOBJ::vFreepfdg + 4 has

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: win32k

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5202f818

  FAILURE_BUCKET_ID: 0x8E_win32k! PFEOBJ::vFreepfdg + 4 has

  BUCKET_ID: 0x8E_win32k! PFEOBJ::vFreepfdg + 4 has

  Follow-up: MachineOwner
  ---------

• Win32k.sys caused BSOD IRQL, looking for likely causes

  While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys.  I have debugged the minidump file and am looking for a reason why it happened.  I don't see anything obvious to said in the report that is generated if:

  Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
  Computer name:
  Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
  The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
  System Uptime: 5 days 2:05:24.971
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .........................................
  Loading user symbols
  Loading unloaded module list
  ..................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}

  Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 9f5fffe4, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: 820cbc5b, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
  Cannot read MiSystemVaType memory at 8214d 420
  9f5fffe4

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! MiUnlinkFreeOrZeroedPage + 87
  820cbc5b 890c 10 mov dword ptr [eax + edx], ecx

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: pcsx2 - r4600.exe

  TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
  ErrCode = 00000002
  EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
  EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
  NT! ExpAllocateBigPool + 0 x 231:
  820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9

  STACK_TEXT:
  cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
  cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
  cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
  cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
  cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
  cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
  cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
  57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
  00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
  cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
  cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
  cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
  cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
  cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
  cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
  cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
  cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x77d75ca4 085a803c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! Win32AllocPool + 13
  5 d a21664c9 pop ebp

  SYMBOL_STACK_INDEX: 9

  SYMBOL_NAME: win32k! Win32AllocPool + 13

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: win32k

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa

  FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  Follow-up: MachineOwner
  ---------

  So far, this was the only time where I had it coming, but I have not tried from new record yet.  Actively running programs are FireFox, Pcsx2 and Fraps.  However, I ran these before without this issue arise.  I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Win32k.sys on Vista blue screen crash

  Every time after that I start the laptop, sometimes it hangs after 5 minutes (or more) and restart.  Even, it crashes when it is waiting for me to enter the password for the connection, and then restart.

  There is a blue screen indicates:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  Win32k.sys
  PAGE_FAULT_IN_NONPAGED_AREA

  Technical information:
  Stop: 0 x 00000050 (0xFDC53002, 0 x 0, 00000000 00000001, 0X970BC8FF)
  Win32k.sys - address 970BC8FF base at 97080000, Datestamp 498f9e9d

  The message is always the same.  I guess that I have this problem since I tried to restore a backup file and it failed.  My computer is running Windows Vista Home Premium service pack 1 (32-bit).  1.73ghz Acer 5570z.  2 GB of Ram

  PS. the reason why I tried to restore a backup file was that: when I use the browser (it happens on IE, firefox or google chrome) to search the Internet for a while, it just stop working.  It shows the page not found.  However, I still can send and receive e-mail.

  But now the blue screen is more afraid of losing the internet connection on browser.  We know any solution?

  Thank you
  Chris

  Thanks Chris

• Infected by a dangerous virus! (inline hook win32k.sys)

  Hello. I have a 64-bit windows computer 7. My computer has been acting strangely, so I checked my computer for infections and viruses with AVG free anti-virus. He picked up the so-called inline hook win32k.sys and he couldn't remove it from my computer. It's amazing how AVG always deletes and secures the threat automatically when parsing. This virus, it wasn't able to do. I need help to remove this threat from my computer because it is really dangerous. Here is a link to more about the virus:

  http://www.avgthreatlabs.com/ww-en/virus-and-malware-information/content/generic-virus/?name=Win32k.sys&utm_source=TDPU&utm_medium=scan&PRTYPE=AVF

  Will you please help me to remove this virus as soon as POSSIBLE because I use my computer for work and don't want any information on this subject, damaged or stolen.

  Please help me get rid of this virus. Thank you.

  David,

  You have scanned your system with your Antivirus (to date) in Mode safe?

  ^ v ^

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://www.SUPERAntiSpyware.com/onlinescan.html>

  ^ v ^

  TDSSKiller Rootkit Removal Utility free download

  http://USA.Kaspersky.com/downloads/TDSSKiller>

  ^ v ^

• Need help with BSOD PAGE_FAULT_IN_NONPAGED_AREA win32k.sys

  Hello

  How it started:

  I turned on my com and the screen was obscured for a few minutes, I force shut it down by pressing the start on my laptop and tried to back button - turn on the laptop, and it came on the screen

  Which was posted on the bsod:

  Win32k.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF901C06729B4, 0 X 0000000000000000, 0XFFFF9600006CCA3, 0 X 0000000000000005)

  win32K.sys - address FFFFF9600006CCA3 base at FFFFF96000000000, Datestamp 53c5df64

  It's probably something that I installed, however I have not installed any new devices to my com, what I did was clean by removing unwanted programs (Non-windows) and clean my com through defragmentation and free disk space.

  I can't seem to find a solution on the forum who can solve my problem, I restarted my com and tried to start in safe mode, safe mode with network, safe mode with command prompt all brings back me to the BSOD. Most assistance in the forum would require me to start working on Windows, but I'm unable to access the windows because regardless of the command I run the com will return to the BSOD. Then I tried pressing F8 startup and select "System, restoration" and by running the backup, the computor invites you to me, ' the selected backup could not be found. System Restore is looking for a restore point that is located on your backup. Choose a different restore point. "I tried to run the backup of all and the same mistake has been invited.

  Finally, I did a system recovery Image so I can't use any device to restore the computor to previous state, while it was working fine.

  Any help is appreciated, thanks for reading.

  Hello

  Thanks for the reply.

  For you to get the dump files the computer should start first and then only you can provide us with the dump files.

  I suggest you follow the steps in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7#section_2

  Note: Please ignore the steps under System Restore and reinstall Windows 7.

• Windows 8 Pro - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys) - Blue Screen of Death

  Hello

  I get a blue screen with the following error: PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys). This happens whenever I start. My computer will be turned on and be normal for the first five minutes, and then all of a sudden, I get this error.

  The computer I use is that I built myself. Here are some features:
  MSI - card mother B75A-G43
  -Processor Core Intel i5-3570
  -RAM Kingston 8G
  The computer is running Windows 8 Pro with Media Center (32 bit). I'm also using AVG Internet Security.
  I have not installed new hardware recently and the only software I had installed before this error was Adobe Reader XL
  Any help would be great.
  Thank you
  Vince

  http://www.Avg.com/us-en/utilities AVG Remover, I would like firstly, uninstall AVG, restart the computer, and then run the AVG Remover and restart another.     Try to run a day or so... on the default windows Defender.     AVG can be reinstalled quite simple if this is not the cause.

  Typically when its saying Page fault in nonpaged area... makes me think it could be bad memory, or some installed program writing to the wrong places.    Remove 1 stick of 4 GB? and swap to test each?

• Win32k.sys BSOD on launch of the first

  Until yesterday, Premiere Pro (CS6 and CC) worked very well. Whenever I try to launch the first now, it freezes at the end of the start screen and hangs my computer with system BSOD win32k.sys "page_fault_in_nonpaged_area" error None of my other Adobe products have had this same problem. After Effects, Photoshop, Lightroom - all loads very well. No updates have been tested, either. I tried the boot safe mode with networking and the same accident occurs. Anyone have any ideas?

  Hi Bhonik,

  Please try to rename the link dynamics and links Manager preferences Dynamics media server from 7.0 to old7.0. You can go to C:\Users\username\AppData\Roaming\Adobe

  and check these folders (make sure that you have display hidden folders). Once done, restart the machine and try to relaunch the products.

  Kind regards

  Vinay