Win7 and nVidia 6150SE 430 motherboard

Are they really compatible? When I run video games like Civ 3 or 4 the processor starts to run high and the fan runs at full speed as the machine is about to take off ;-). The games can be run in full screen mode and even with a window frame and the animation set as low as possible, the set of parameters 'Global' or low nVidia, I still I have this problem.

I downloaded updates (280) recommended driver from nVidia for compatibility and problems with the windows leaving 'trail' when they were displaced the other. This seems to be a question of resources.

Can I solve this problem with a separate graphics card? And if yes how heavy duty a card can the system handle?

Yes, Windows 7 and Nvidia 6150SE/430 chipset are compatible. Probably you are in need of a discrete graphics card to offload processing card video system. If your system has slot PCIe x 16, almost any PCIe x 16 graphics card should work your power suplly provided is large enough to power the new card.

You don't mention what HP/Compaq computer, you have, so we can only speculate about the extension and power connectors that has your computer. Please provide your number of HP/Compaq exact model or product number for more specific help with your question.

Frank

Tags: HP Desktops

Similar Questions

  • need driver NVIDIA GeForce 6150 SE and NVIDIA nForce 430

    I can update this driver because I can't go back or get help from Nvidia\ and it seems that there are 2 pilots of different type from the Manager of devices for widows update instalation I don't know why NVIDIA GeForce 6150 SE and NVIDIA nForce 430 is what in my device manager and my control panel , it shows an another nvidia drver tha a ge force 6100 nforce 430. someone please help me with what I think if I resove this then it will update this driver can then I can update BOF IE7 and IE 8

    Find you the driver you need?

    SP2 is usually delivered via Windows Update

    To find out if SP2 is already installed

    • Click the button start , right click on computer and then click Properties.

      If Service Pack 2 is listed in the Windows edition section, SP2 is already installed on your computer and you do not need to follow the instructions below.

    You can install it manually using the link here

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  • Engine reading Mercury and NVIDIA cards

    I assumed that this has been discussed in the past, but my research turned up empty.

    I run CS4 body for a while but am upgrading to 5.5 organization and I also want to go ATI to NVIDIA to get CUDA mercury reading improving.

    I'm glad I checked that I discovered that only a very few cards consumer (no Quadro) is listed.

  • GeForce GTX 285 (Windows and Mac OS)
  • GeForce GTX 470 (Windows)
  • GeForce GTX 570 (Windows)
  • GeForce GTX 580 (Windows)
  • I want to go with the consumer line because my PC is also used for other things and is not a PC edition devoted.

    If it's true that these are the only ones that work?  Or is that a lot of PC of areas where things work (such as memory and motherboards), but not everyone is put to the test...

    I saw a site where it said that you had to hack a file or something in order to get other cards NVIDIA Cuda to work in the mercury with Pr Pro mode even if they were equal to or greater in power than these...

    Thanks for the help,

    BJBBJB1

    I guess the question is if you think Adobe is likely to reduce the number of cards taken in charge or he hard code in the program.  Personally, I think CS6(+?) could fully support CUDA cards.

    FWIW, I just do the hack with my GTX 560 Ti card and it worked.  I'm running the PPBM right now.  Unfortunately, my AMD Opteron 165 system based, RAM DDR (not number) based has a LARGE number of bottlenecks that kill performance, BUT it's much better with the 560 card than without!

    The previous card, I had was an ATI Radeon X1950XTX.  However, I gave up on them after that they don't provide for her drivers for Win7.  Yes, the Vista 64 drivers worked, but without support, I have a quite expensive anchor point.  IMO, Nvidia, however, is much better than ATI in driver support.  So I will stay with them for a while.  Just my experience, though.  Hey, I have a few old 6600GT cards and Nvidia has drivers for Win7 64-bit available.  And it's an old card.  In any case...

    The GTX 570 should provide more than enough power for the current iterations of first.  ATI provides an 'equivalent' (OpenCL), but Adobe, for some reason, is not support.

    I hear you on Adobe supporting a larger number of CUDA cards.  I know that CUDA programmers and they tell me that the code is not limited by the cards.  You call the driver/CUDA features card and it works.  So I'm at a loss to understand that.  It simply limits their customer satisfaction.  It is not like they are not big enough to test.

    FWIW, the GTX 560 it seems to work well with CS5 and I guess would work well with CS5.5.

    Good luck in your adventures.  As I buy the additional hardware, I'll try to update here.

    Scott

  • How can I recover my favorites after having reinstalled Win7 and Firefox?

    I had to reinstall Win7 and Firefox and now need to find my bookmarks file and put it back in Firefox. What is called, and where is it located?

    These backup files are compressed and not human readable. You can use it to completely replace your current set of bookmarks using the rollback feature (see beyond the dates at the bottom of the menu "Choose file...).

    Important: A restore completely replaces your current set of bookmarks. If you have saved any new bookmarks you need, add a few steps:

    (1) export current bookmarks to a file as HTML: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
    (2) then do the restore
    (3) import this file in HTML format: import bookmarks to an HTML file
    (4) move the Bookmarks imported into their correct locations (they should be a folder of bookmarks imported somewhere on the menu bookmarks or Unsorted bookmarks)

  • Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

    Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

    I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

    Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

    I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

    Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
    Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

    If someone could have some drivers or set which will slow down the fan under 64-bit windows?

    T.

    Hello

    You can set Windows Power plan settings in order to improve the cooling system.


    Changes in the operating system:
    --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

    Changes in the Bios (power management):
    Intel Turbo boost Technology

    Changes in the operating system:
    TOSHIBA HW Setup--> the CPU frequency mode

    Try this settings:
    Plan (Toshiba power save) optimised battery
    Technology Intel Turbo Boost (BIOS) - disable
    The CPU always low frequency

    From my experience, this should reduce the noise.

  • maximum resolution of OEM nvidia 6150SE

    I have the HP p6402f with the nvidia 6150SE integrated graphics card oem desktop.  I'm trying to find what maximum screen resolution it will support. I want to use a 22 '' with 1920 X 1080 but would like to know that it will work at this resolution, before buy you.  Any info is much appreciated.

    Le HP p6402f specifications on the portal only shows as having been delivered with nvidia 6150SE integrated graphics card.

    Graphics Intel GMA X4500HD is listed as the integrated graphics card. Intel says it is capable of full HD 1080 p 1920 x 1080.

    Where did you find oem nvidia 6150SE integrated graphics card?

  • Lenovo Intel HD 3000 Z570 and Nvidia GT 520 questions

    I'm having a lot of trouble with this laptop recently, it has the optimus nvidia with the intel hd 3000 and nvidia gt 520, I can't get either the nvidia gpu not working at all I can see in my device manager and it has the message "Windows has stopped this device because it has reported problems. (Code 43) "in the properties of the device, also when I click on the Nvidia Control Panel I get the message"Display settings not available - you are currently not using A display attached to A Nvidia Gpu NVIDIA", I know that there is a switch on the front of my laptop which is supposed to enable the gpu from nvidia, but when I use the switch nothing happens , except that the light next to the switch is still on, the nvidia card worked very well and I had no problems with it, but I restarted my pc one day and BAM, nothing works, I tried a lot with this, I uninstalled my graphics drivers and re-installed both of them, I looked in the BIOS and it is set to "Optimus" I updated the BIOS and all my computer drivers I also tried to reinstall windows today, but it still doesn't work, when I run Dxdiag it recognizes only Gpu Intel HD and not the Nvidia one, it's incredibly frustrating, above, I have not used this card and it is not any visuably wrong with it everything on my computer works perfectly well, that's just the gpu from nvidia , the reason why I am so angry over this is I really need the gpu nvidia working I'm on a college course which requires me to have a good graphics gpu to run programs like photoshop and cinema 4 d and they work better with the nvidia gpu. If anyone has any idea at all so please please tell them to me, I'm willing to try anything at this point.

    Never mind to this subject, but if someone come across this topic and has the same problems. Here's what I did.

    Shut down the laptop computer

    At startup screen press F2 to enter the BIOS settings go to display and change of "Optimus" to "UMA" only save and exit and continue boot

    When back on desktop close the laptop once more and get into the BIOS, even once, once there change everything back to default settings then save and exit. When I did my control panel nvidia and card worked once more and I have not had problems since when restart everything worked again.

  • P1102w wireless printer will not print until you stop win7 and restart

    I have a Gateway PC with win7 and when I print a document, it does not print. If I shut down windows, and then restart it prints the document.  No idea as to what needs to be corrected to make it print while remaining in windows?

    Well, after the third time to remove all HP p1102w devices and software I am tp in print. When I select a file to print I now see status: ready.  Thanks to everyone for their support on this issue.

  • Desperate cry for help - Win7 and SBS 2008 sharing network/disconnections

    Hi all

    I am facing a problem of bad guy who frustrated me for several weeks now!

    Scenario:
    1 Windows Server 2008 SBS Premium Edition (not R2)
    Network share: \\Server\DBShare
    also mapped as J:\ on client computers
    Share contains some databases Access 2002 ("access xp") back-end (BE)

    2. customers: all diversified machines: XP, Vista, Win7, etc...
    ALL have Access XP (2002) installed (runtime) and run a horrible old 13 year front-end (FE) which has been spasmodic developing since 1997. It is mission critical and there is no budget to rewrite is because it is sprawling and has its hooks in each device, procedure, policy and activity that we do.
    Front-end is run locally, lies in the path of users % appdata %.

    Problem:

    Currently 8 x peripheral non-Windows 7 system to access every day, stay connected 24 hours a day and never give disk errors or network.

    ANY windows 7 machine is guaranteed to give disk or network error messages at some point - from 30 minutes to 15 hours by opening the front end and be left idle.

    NOTE: I was sent here on the forum to access because they thought that Win7 forum would be more appropriate. For non-access users, Access is like the Canary in the coal mine
    with regard to the problems of network connection. Even a slight network disturbance causes to complain about errors on the network and to require the connection to database
    to be re-created, data loss and potentially damage this database to the file system.

    I had all the world put in place using j:\variousdatabases.mdb, but read it as one
    Nono so I scripted a change in all the drives mapped to UNC paths in the
    connection of these tables property.  With this change, sometimes I just
    get an "odd" error disk or network, then am able to reconnect - but this
    bothers me terribly because 1. It can do damage to the db, 2. He
    means that I must write to this trap for more than 300 forms and even the management of errors
    so I think that there will be some things that I can't trap and 3. It is also SOMETIMES
    do not reconnect and I get messages repeated... or even an appcrash.

    When I say EVERYTHING, I mean I have 4 test devices: a work station, a Mini PC, a
    laptop and a netbook. This started as a 'test upgrade' to Win7 on the
    post work - but after this Show-stopping number, it became a desperate
    Troubleshooting jamboree, involving more than systems and other tests, because the
    solution seemed just around the corner.

    Now, a week later, I'm ready to give in on computeres forever and go live
    under a bridge, since I am unable to solve this problem and have already invested so much
    a lot of time into it!

    Here's what I think, that I decided to go out and why:

    Not a problem of network infrastructure.
    I can unlug a minipc with vista on it (same exact material) and connect it to the
    the ethernet port on a win7 test evil machines and it plugs.
    Fortunately for more than 24 hours. All the machines are on the same switch 24 ports. All the
    nonwin7 machines work as if in a dream, even when moved to the port/cable
    used by the machines of win7.

    Not a problem of a server NETWORK card.
    See above. Other devices not win7 Purring immediately without disconnecting.

    Not a server problem.
    SBS2008 works * Virgin * for the last 7 months. Only the reason for
    glance has been recently to try to resolve this problem of fools...
    All clients not win7 are happy as can be, always.

    The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
    SERVER.
    EVERYTHING in the driver for the card that could be discharged (and has been by default,
    no problem on other non-win7 clients) has been decommissioned. I also have
    off the chimney and any other devices of automatic setting on the server.
    (FYI - all STILL happy nonwin7 clients, server shows no significant increase)
    in the CPU usage)

    The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
    CLIENTS.
    Doing the same thing again on clients - auto tuning off the coast, where the unloading off
    possible. Latest installed NETWORK card drivers that give many options of unloading
    to turn off.

    No offline files
    These have been disabled on the server, on the client and in the group shares
    policy just to make a point.

    Not the MiniPc / the workstation laptop / Netbook / la
    Seems unlikely that all 4 would not work because of the material error AND
    drivers of offensive, but I ran out of ideas - so I photographed the MiniPC win7
    and put Vista on. To my great regret, the Vista OS on the same device works
    perfectly. Recreate the image of the OS Win7 and BOOM - same problem.

    No IPv6
    Disabled on the clients and the server

    No IPX/SPX
    Not installed on the server

    No network traffic
    (happens when I'm all but 5 computers off tension and nobody in the)
    Office as well in the middle of the day when users are 'use'.)

    Not the time of day
    Sometimes after 15 minutes in the middle of the afternoon or after 6 hours to
    04:32 - does not coincide with the events of on the server or the client error log, does not
    coincide with DHCP renewals (which are in 2 weeks)

    No server autodisconnect
    The value - 1 both server and client (I know that's irrelevant on the client))
    I also tried to add a ffffff keepconn regentry (I know that the stated max is
    64 k, but it doesn't help me have the connection after 18 hours.)
    FYI - no effect with or without the keepconn registry entries.

    Not be able to save
    4 machines, 4 different ranges of stuff randomly to stop turning out - of
    NICs for windows power plans to simply disable acpi. Problem
    continues

    Not my version of Windows 7
    Tried our company VLK Win7 and my personal copy of win7 ultimate
    and the NetBook win7 Home premium. SAME SAME SAME

    Not my drivers up to date
    MS stock on old machines drivers that are not built for Win7 show me the
    same error
    Laptop and Netbook (the latter preinstalled by the vendor) also give the same problem

    It is not that I do not use the drive\UNC.
    I ran a separate script that does just a DIR() on file every 10 seconds
    and yet, I finally get disk errors.

    It is not that I am not query the database and the connection is time
    There is a database search all 2 minues in PA to check new data in a table

    This isn't a field/roaming profile issue
    I tried logged as a domain with the profile user roaming user admin not now
    the area, officially added to the domain and even laptops PCs
    not registered on the domain.

    It's not the system restore
    Disabled on clients

    Is not SMB signing
    This is disabled in server group policy and still the same problem...

    Help, please!

    Any ideas would be much appreciated!

    Thank you in advance to help improve my new year! & Happy holidays to those of you luck is not to be this troubleshooting!

    Alex

    Thanks diana,.

    I tried my luck in the Technet Server forum you suggested.

    For others who want to follow my progress, here is the link:

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/0527a084-1953-47f0-ae83-febb52af14fc

    Happy new year!

  • Sharing printers between Win7 and XP

    I'm trying to share a printer connected to my XP desktop with my laptop Win7 and having problems with the drivers.

    I talked to Epson and they say that it is only possible to share printers if Win7 is the host and refuse to look at what if this isn't the game to the top.  Microsoft doesn't offer any support that you don't pay for, what is the situation?  You can share a printer XP welcomed with a Win7 machine?

    If your XP system is the 32-bit version and your Windows 7 system is 64-bit, then you might have some problems unless you install a driver 64 bit on Windows 7 system.  You can do on this side of the WIndows 7 form creating a port of the form \\xpsystem\printer and 64-bit printer installation.  "xpsystem" is, of course, name of your XP system and "printer" is the part of the printer. Brian Tillman [MVP-Outlook]

  • I have a toshiba laptop (4 GB ram) with Win 7 64 bit. Can I format with 32-bit win7 and after that the 32-bit system reads all the 4 GB of ram?

    I have a toshiba laptop (4 GB ram) with win7 64-bit can I format all the 4 GB of ram with 32 bit win7, and after that can read 32 bit system?

    [Moved from comments]

    Original title: decommissioning

    W

    64-bit can but 32 bit can only use concerts of ~ 3.25.  Why would you want to change (which would require a complete reinstallation including all apps) 32-bit?

  • XPS Intel HD 4600 Graphics and Nvidia Geforce GT 750 2720 m

    Hello

    For about 3 weeks and a few updates to the Windows and Nvidia driver in may 2015, it seems that the Nvidia graphic card is no longer used by the Dell PC XPS 2720.

    I tried to just reinstall the drivers of two first from the website of dell and alternately of each Web site from intel and Nvidia.

    The two cards are included in the device (Device Manager) Manager, but each time, the graphics card intel HD is the only graphics cards that really works and used by the PC for an application or a game.

    I can check with software such as speed of the fan or CPUID, CPUID HW Monitor.

    Similarly, if I forced systematically into the control panel NVIDIA, the Nvidia card for the global or individual parameter, the Nvidia card is not used.

    Normally the Nvidia should be better for 3D application or games.

    Comments, solutions or justifications will be very appreciated.

    Thank you and best regards,

    PS: I have read all the previous posts on the subject and I know that the two graphics cards usually work together and have been in the past subject to a number of positions or problems related to their 'recognition' by the PC. I have Windows 8.1.

    Hello

    Thanks for sharing the solution. If you have questions in the future to write us, we will be happy to help you.

    Sincere greetings,

  • RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

    I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
    All the 4 sticks of RAM are the same brand and compatible with my motherboard.
    I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
    I got a few BSOD - 0 x 00000109 - errors that I work.
    I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
    These memtest errors concern the bars invisible RAM or the work those?
    Any ideas as to what should I do next?
    See you soon!
    Data sheet:
    Windows 7 Home Premium 64-bit
    Intel Core i7-3820 @ 3.6 GHz
    ASUS P9X79
    GeForce GTX 650
    Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

    Thanks Joel,

    I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
    I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
    I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
    So that's one mystery solved at least.
    I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
    Thanks again.
    Nick
  • How can I copy book addess of outlook express on your laptop running xp, to a new laptop running win7 and office outlook

    How can I copy book addess of Outlook Express on your laptop running xp, to a new laptop running Win7 and office Outlook 2007.

    I don't know if Outlook will import directly a stand-alone WAB. He could.

    You might try that first.

    If this does not work, you have two easy options.

    1 export the OE address book to CSV file and import that into Outlook. (Make sure you check the mapping of the fields before making the final import)

    2. install Outlook temporarily on the XP machine and import the addfressbook. Transfer the pst file that result to Outlook on the new, open and copy all contacts in all.

  • First 10 items does not work with the latest NVIDIA drivers, and adobe and NVIDIA will not solve the problem, why should I pay a fee to upgrade to the latest elements when you fix it, and I find myself with old drivers that affect the game?

    I have the question well documented with newer NVIDIA drivers impacting on the preview of the videos in the first 10 elements. Download driver of 5/2013 has solved the problem, however, there whims... which I do not think that I would have to pay for an upgrade of the elements to get rid of the question with my video card. What can we do about it? $89 for your problem is not something that I like...

    This is a user to user forum, so I'm not sure how to answer your question.

    Problems with the version 10 and nVidia drivers began about a year or two ago - when version 10 was already on two years and two generations of old. So I'm not sure that adobe is going to offer a fix for an old version of the program. Particularly when the nVidia drivers seem to be originally.

    Certainly, you can contact Adobe Customer Service and see if they go on you some sort of agreement on another version of the program. Or you can take a copy of old or second-hand version 11, 12 or 13 on Amazon or eBay for pretty cheap.

    I heard about people who work around this problem by loading a previous version of a driver from nVidia. But those who seem to be options. The least likely scenario is that Adobe will award a fix for a four-year program.

Maybe you are looking for