Win7 has exchanged information on the material between the integrated video card and add on video card - need to share in return. Registry hack?

Similar Questions

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• HP Pavilion a6551nl: HP Pavilion a6551nl how to activate the integrated video

  I have a HP Pavilion a6551nl and the video card is a failure. I spent with a Compaq desktop, I have, and here he also fails. Compaq video card works fine in my HP Pavilion a6551nl. I read that the HP Pavilion a6551nl has integrated video, but that it is not available when a video card is installed. Now, my video card has no I would like to know how I can activate the embedded video.

  The system must detect the absence of a video card installed and return to the integrated video.

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• Always comes back to the integrated graphics card

  Link to the pc I have: http://www.bestbuy.com/site/Alienware+-+Desktop+-+6GB+Memory+-+1TB+Hard+Drive/4819186.p?id=1218535466777&skuId=4819186&st=alienware&cp=1&lp=2

  Specifications are in the article, but for the sake of speed...
  SP1 Windows 7 64
  CPU i7-2600 @3. 40 ghz
  6 GB memory
  Graphics GeForce GT 545

  I bought a computer with the integrated graphics card intel and a dedicated graphics card.   I use my RCA HDTV as a monitor for my system.  There is no VGA port on the Tower, so I have to use the HDMI port to get on television.   The problem I have is that it seems to always return to the integrated card intel and not good graphics card.   First thing I noticed when I hooked it up and the resolution of the screen is cut off at the ends.  I could go through and set it so that nothing has been cut, but the only way I can get it to work on the NVIDIA card is if I go in the resolution of the screen and set it as if I had two monitors.

  When I go into the resolution of the screen / monitor settings, sound as if he thinks that I have 2 different monitors hung.  When I identify, the flashes '2', so I know she feels the one I use is the second.

  If I use these settings I get this - .pic (http://i46.tinypic.com/2n718rc.jpg), I get the error message "you are not currently using a screen attached to a Nvidia GPU... pic (http://i47.tinypic.com/1zvg80l.jpg)»

  But if I use this - photo (http://i48.tinypic.com/o53oyt.jpg) link, it works very well.   Until I start Steam, once a game is loading, it jumps on the integrated map and we start chugging along.

  It wouldn't be that big of a deal, but one of the biggest reasons that I bought the thing was so that I could play on it.  I go to a game and while its on the integrated map, just of becomes mud and does not move.

  Hi, Tom.

  This is an old article but can be of Help.

  How to connect a tv to a pc with Nvidea

• Longevity of the integrated graphics card

  Is the integrated graphics card Intel Iris ok to run LR/PS for ~ 5 years? Assume the Haswell i7 3.0 GHz, 16 GB RAM chip. In addition, what running 4 K and 5 K watch?

  Will probably not answer your question. I use Lightroom CC 2015.4 on Windows 10. My computer has Intel integrated graphics card, no separate graphics card. I don't know any specific number, there is a given number when I check. Lightroom is running smoothly on my computer. However, this slideshow does not work correctly. By people of the Adobe staff, I was told that the slideshow module depends on a compatible graphics card in the latest version. Here is a link to a site that might have some answers for you:

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

• Alienware 17 - integrated graphics not detected in BIOS - cannot switch to the integrated graphics card

  As the title says, I own an Alienware 17, bought around November of 2013. My NVidia GeForce GTX 770 M runs like a champ. But I can't go to the integrated graphics card (should be Intel HD Graphics 4600). I tried the Fn + F5 (several times). It is said that it is "optimal". Tried with the laptop plugged in and not plugged. I looked in Device Manager and there is only a single index card (NVidia) view. I then booted the BIOS and it said: 'Integrated Graphics - undetected. " I have the latest BIOS version available on the support Web site.

  Don't know what to do at this point. I should have integrated and discrete, but only discreet is detected. I want to be able to switch to the Intel card, so that I can mess around with things like the Intel WiDi and want to also DO NOT perform my NVidia card all the time, and because I'm not playing games all the time.

  Any ideas? All support staff out there who can help out me?

  Cub... I think I might have answered my own question... My laptop has the option to display 3D 120 Hz. For this reason, 'Optimus' technology is not available (I think I say this right), and so I can't go to the graphics card Intel because of the way the 3D display is wired. There is a YouTube video that I saw what explains the all (link below).

  "Alienware 17 with 120 Hz 3D display has no integrated graphics":

  https://www.YouTube.com/watch?v=RJ3IRvCkllg

  Then... Not sure that I'm too happy with Dell right now. One of the advantages that I looked forward had to be able to change maps and play with some of the features of the Intel WiDi map in particular. When I bought the laptop, I was not made aware that I would lose the functionality of upgrade of the screen to get the 3D option. Would have been nice to know, so that I know what are the trade-offs.

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• Different in the integrated graphics card as says compney

  I bought HP 15-g002AX a month... before you buy I read the specifications carefully... everywhere I found that the integrated graphics card is AMD radeon hd 8570 m 2 GB, but after you buy and check the graphics card it is Amd Radeon Hd 8500 m and graphics Amd Radeon (TM) R5

  Dishant99 wrote:
  I bought HP 15-g002AX a month... before you buy I read the specifications carefully... everywhere I found that the integrated graphics card is AMD radeon hd 8570 m 2 GB, but after you buy and check the graphics card it is Amd Radeon Hd 8500 m and graphics Amd Radeon (TM) R5

  "Amd Radeon Hd 8500 m" is the series to which belongs an AMD HD 8570 m.

  You can download and run CPU-Z to correctly identify the discrete graphic card installed in your laptop. The Graphics tab as shown in the picture. You can use the Catalyst Control center first select the Radeon HD 8570 m. Switchable graphics on HP laptops

  

• No sound work of the integrated sound card since the withdrawal of another sound card

  When I bought my pc from Dell, I installed a map 5.1 sound. However I now need to use the pc for a wireless card slot, so removed the sound card and hoped to return to the integrated sound card. Although he seems to think that all devices are working correctly, when I try to listen, by using the sockets on the back or forward, there is no sound. The audio realtek manages it say that there is no device plugged into the system.

  Hello

  Check with the manufacturer of the sound card documentation to see what this cable.
  (What is the brand and the exact card model - if you need help to find
  the instructions that they should be available on the site and Google?)

  Check with Dell Support, their documentation online, and their forums for
  known issues as this sound more like a hardware issue that some pilots
  (Links above).

  ================================================

  Maybe an upgrade in Place or the repair facility might help. Do not forget to
  make a good backup or three.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• If I have the resell, involving renewals and add as well as the original agreement?

  If I have the resell, involving renewals and add as well as the original agreement?

  Yes, when you as a partner to resell Solutions of Cloud Oracle you participate not only in the original agreement, but also of the renewals and additions to the service. As a reseller, you have the relationship with the end customer and you want that for too long the service continues.

• I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  Disconnection of the step is mentioned in the link below:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Even after disconnection and signing in if you are still having the same issue, let us know if you use Windows or Mac computer?

  We will have to check once a Hosts file.

• Save the file with the data from field and add more information

  I'm looking to create a button that will be a button Save and add the data in a field to it when I save it.  So it would be a click event in javascript and inside of the "saveFile" information adds TextField1 and "text that I make up" which would create the name of the saved file.

  Hello

  Not sure if you have this sorting.

  But this could be done by using the function of trust

  create your form as usual

  then create a further subform and getting in to a record in the box (just add a textfield and little text and a button)

  have the save button on the form simply call the saveas subform

  SaveAs.Presence = "visible";

  then the button in the subform saveas have the following (under the click in javascript event)

  SaveAs.Presence = 'hidden ';

  event.target.saveasFunc ();

  to get this feature work, you must create a Notepad with the following code .js file

  saveasFunc = app.trustedFunction (function () {}
  app.beginPriv ();

  var text1 = event.target.xfa.resolveNode (".saveform form1 [0] [0].") ("TextField1 [0]") .rawValue;
  Text2 = event.target.xfa.resolveNode var ("form1 .saveform [0] [0] .saveas [0].") ("TextField2 [0]") .rawValue;

  try {}
  event.target.saveAs ("/ c/forms /" + text1 + "" + Text2 + ".pdf" ");
  } catch (err) {}
  App.Alert ("Error:" + err);
  }
  app.endPriv ();
  });

  Obvisously properly the objectives and the backup directory

  then save this file as name then place you like .js for example (saveas.js) this file in the c:\program files\adobe\acrobat\javascripts or similar, but with the player if you use adobe reader software.

  If you intend to use this file in the drive then you will need to activate features extended drive on the file using Adobe Acrobat.

  OK above is only available where you can load the .js file in the correct directory.

  I use it by creating a simple installation file that has placed the .js file in the right directory and Ontario form right end users computer.

  It may or may not work for you.

  If I can help others let me know.