WIN8 - no desktop, black screen with the mouse pointer. Manager tasks and the login screen work.

As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?

OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.

Here's what I did:

1. I opened the Task Manager, the Details tab

2. I killed all explorer.exe on the list

3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)

4. I started the new instance of explorer.exe via file > run

And voila, I had the desktop and the taskbar.

It will be useful.

Tags: Windows

Similar Questions

  • I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

    pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

    Wow!

    So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

    Follow the procedure below:

    • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
    • Make sure that there is no entry of Adobe on the inside.
    • Then copy and paste the Hosts file in folder etc.
    • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
    • When you are prompted, the authentication by password Mac,
    • Be sure to select the option Replace ...
    • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
    • In the affirmative. launch creative cloud application and load the list of Apps and check.
  • Display problem multiscreen-cannot configure monitor two (side-by-side) with the ability to work on both

    Hi all

    I am trying to configure Win7 so I can use two monitor (side-by-side) with the opportunity to work on both. For example, to keep the email open on one monitor and use other software on monitor B.

    Here is a screenshot that shows the settings I use. Can someone please take a look and advise?

    Thank you!

    Todd

    The graphics card may have the drive necessary to operate 2 monitors on a split bar but monitors also communicate with the PC to tell him what the monitor can handle using the SDC.

    It cannot accept the two sets of data SDC on the same entry even if theoretically they have the same data to send.

  • 802. 1 x with the login script

    Hello

    Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.

    We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.

    Whatever measures are necessary to make the login script work?

    ISE:2.1

    switch: 3750 with 12.2 (55) SE10

    PC:Win7 (to connect to the ip phone)

    IP phone: 6921 (connect to switch f 1/0/4)

    Switch configuration is to see more:

    !
    version 12.2
    no service button
    tcp KeepAlive-component snap-in service
    a tcp-KeepAlive-quick service
    horodateurs service debug datetime localtime show-timezone msec
    Log service timestamps datetime localtime show-timezone msec
    no password encryption service
    Service linenumber
    sequence numbers service
    !
    hostname ISESW01
    !
    boot-start-marker
    boot-end-marker
    !
    enable password 7 xxxxxxxxxxxxxxxxxxxxxx
    !
    username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
    !
    !
    AAA new-model
    !
    !
    RADIUS AAA server group ISE
    auth-port 1645 10.202.152.91 Server acct-port 1646
    auth-port 1645 10.202.152.92 Server acct-port 1646
    !
    default AAA dot1x ISE authentication group
    AAA authorization network default group ISE
    AAA authorization auth-proxy default group ISE
    accounting AAA periodic update 5
    accounting dot1x default start-stop group AAA ISE
    AAA accounting system by default start-stop group ISE
    !
    !
    AAA server RADIUS Dynamics-author
    customer 10.202.152.91
    customer 10.202.152.92
    !
    AAA - the id of the joint session
    switch 1 supply ws-c3750v2-48ps
    mtu 1500 routing system
    VTP transparent mode
    DHCP excluded-address IP 10.202.21.1 10.202.21.10
    DHCP excluded-address IP 10.202.121.196
    !
    IP dhcp pool testingdhcp
    Network 10.202.19.0 255.255.255.0
    router by default - 10.202.19.1
    10.202.152.21 DNS server
    !
    !
    analysis of IP device
    !
    MLS qos map policed dscp 0 10 18 24 46-8
    MLS qos map cos-dscp 0 8 16 24 32 46 48 56
    MLS qos srr-queue input bandwidth 70 30
    MLS 1 80 90 qos srr-queue input threshold
    priority-queue input bandwidth 2 30 MLS qos srr-queue
    queue threshold 1 MLS qos srr-queue input cos-map 2 3
    queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
    queue threshold 2 MLS qos srr-queue input cos-map 1 4
    queue threshold 1 MLS qos srr-queue input dscp-map 2 24
    queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
    queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
    queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
    -More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
    queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
    queue threshold cos 2-map of MLS qos srr-queue output 1 2
    queue threshold 2 cos-MLS qos srr-queue output 2 3 card
    queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
    queue threshold cos 3-map of MLS qos srr-queue output 3 0
    queue threshold 4 cos-MLS qos srr-queue output 3 1 card
    queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
    queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
    queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
    queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
    queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
    queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
    queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
    queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
    queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
    queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
    queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
    MLS qos all the output queue 1 1 100 100 50 200 threshold
    MLS qos queue of output 1 all threshold 2 125 125 100 400
    MLS qos queue of output 1 all threshold 3 100 100 100 400
    MLS qos queue of output 1 all 4 60 150 50 200 threshold
    MLS qos all the output queue 1 15 25 40 20 buffers
    MLS qos
    !
    Crypto pki trustpoint TP-self-signed-1210376576
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 1210376576
    revocation checking no
    rsakeypair TP-self-signed-1210376576
    !
    !
    TP-self-signed-1210376576 crypto pki certificate chain
    certificate self-signed 01
    xxxxxxxxx
    quit smoking
    Auto qos srnd4
    control-dot1x system-auth
    dot1x critical eapol
    !
    !
    !
    !
    pvst spanning-tree mode
    spanning tree extend id-system
    VLAN spanning tree priority 819 61440
    !
    internal allocation policy of VLAN ascendant
    !
    VLAN 121
    name Voice_Vlan
    !
    VLAN 819
    name 19F_VLAN
    !
    VLAN 888 899
    !
    !
    class-map correspondence AUTOQOS_VOIP_DATA_CLASS
    match ip dscp ef
    class-map correspondence AUTOQOS_DEFAULT_CLASS
    match the name of access by DEFAULT ACL-AUTOQOS group
    class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
    match ip dscp cs3
    class-map correspondence AutoQoS-VoIP-RTP-Trust
    match ip dscp ef
    class-map correspondence AutoQoS-VoIP-control-Trust
    match ip dscp cs3 af31
    !
    !
    Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
    class AUTOQOS_VOIP_DATA_CLASS
    DSCP ef Set
    128000 8000 exceed-action of the police controlled-dscp-transmit
    class AUTOQOS_VOIP_SIGNAL_CLASS
    DSCP Set cs3
    32000 8000 exceed-action of the police controlled-dscp-transmit
    class AUTOQOS_DEFAULT_CLASS
    Set default dscp
    10000000 8000 exceed-action of the police controlled-dscp-transmit
    Policy-map AutoQoS-Police-CiscoPhone
    class AutoQoS-VoIP-RTP-Trust
    DSCP ef Set
    320000 8000 exceed-action of the police controlled-dscp-transmit
    class AutoQoS-VoIP-control-Trust
    DSCP Set cs3
    32000 8000 exceed-action of the police controlled-dscp-transmit
    !
    !
    !
    !

    interface FastEthernet1/0/4
    switchport access vlan 819
    switchport mode access
    switchport voice vlan 121
    authentication event fail following action method
    action of death event authentication server allow voice
    no response from the authentication event action allow vlan 889
    living action of the server reset the authentication event
    multi-domain of host-mode authentication
    authentication order dot1x mab
    authentication priority dot1x
    Auto control of the port of authentication
    MAB
    added mac-SNMP trap notification change
    deleted mac-SNMP trap notification change
    dot1x EAP authenticator
    dot1x tx-time 10
    spanning tree portfast
    !

    !
    interface Vlan1
    no ip address
    !
    interface Vlan819
    IP 10.202.19.11 255.255.255.0
    !
    default IP gateway - 10.202.19.1
    IP classless
    IP http server
    IP http secure server
    !
    !
    IP access-list extended by DEFAULT ACL-AUTOQOS
    allow an ip
    IP access-list extended redirection
    deny udp any eq bootpc any eq bootps
    deny udp any any eq bootps
    deny udp any any eq field
    deny ip any host 10.202.154.192
    allow an ip
    !
    !
    SNMP - server RO Cisco123 community
    RADIUS attribute 6 sur-pour-login-auth server
    Server RADIUS attribute 8 include-in-access-req
    RADIUS attribute 25-application access server include
    dead-criteria 30 tent 3 times RADIUS server
    RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
    RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
    RADIUS vsa server send accounting
    RADIUS vsa server send authentication

    I had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.

    Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.

  • Problems with the functionality of work plan...

    I have trouble getting the right size of the image when I export my work. After that I put my the artboard size, I export the image in Dreamweaver. When the image in dreamweaver, the "cropped" portions of the image are still there. Basically, the height and width of the image, I work with Illustrator is on 3 "x 4", but I only want displayed to 2 in. x 3 and didn't seem to do it with the tool of work plan.

    If you use save for web, make sure that "clip for work plan" is checked under the tab size of the image.

  • H8 - 1330 PC with NVIDIA GeForce GT 630 after windows log in the black window with the cursor of the mouse only has

    Hello

    PC is a h8 - 1330's, and the graphics card is a NVIDIA GeForce GT 630 with driver version 9.18.13.270 dated 29/08/13. connected to a TV through an HDMI cable samsung. It is running windows OS 8.1.

    I installed 1 conc TV tuner card but otherwise the system is HP standard configuration as it was shipped.

    I think that I had a disorder with the pc update as I turned it on and after reaching the windows log on screen and pc connection seems automatic Windows boot in windows and I see only a black screen with the mouse cursor. I can ctrl + alt + delete and check out the Task Manager, but not other windows will appear. I tried to change username, sign in with a different account and get the same question.

    I'm fighting to enter the safe mode or any other mode at startup to the top to see if I can roll back the video driver.

    I tried pressing ESC then f11 to make a restore without success.

    I can't enter the mode without fail to start via shift + f11 or f11.

    My father has the same PC and does not see this issue.

    I was wondering if anyone has any suggestions of things I can try?

    hoping to try a software patch before trying the different video cards/monitors to isolate the problem.

    see you soon,

    Andrew

    Thank you for the additional information.

    Try this to see if it helps:

    To restore your PC to an earlier point in time
    1. Enter in the right edge of the screen and then click on search.
      (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

    2. Enter the control panel in the start search box and press or click on Control Panel.

    3. Enter the collection in the control panel search box, and then tap or click recovery.

    4. Press or click Open System Restore, and then follow the instructions.

    Follow these instructions carefully to see if they will help you.

  • I need help for Windows Vista black screen during the connection, even with the login screen removed

    Hey, I have a problem in Windows Vista:

    I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .

    PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

    Hello

    Follow the steps below:

     

    Method 1: Do the Startup Repair to fix the problem.

    See the following article for more information on the Startup Repair:

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

     

    Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    For instructions, see the following article:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    http://support.Microsoft.com/kb/927392

    Let us know if that helps.

  • Brand new XPS 8700 desktop black screen

    Hello world. I have a big problem with my desktop computer. I just got my computer a week ago. I had problems with a black screen for a while. I read on the site of dell desktop XPS 8700 computers have problems with this (something on the cube map) and he said that updating the BIOS solves this problem, well it's not.

    My computer wont even start until now. All I get is a black screen. I don't know what else to do.

    Hello

    I called Dell and we arrived after that the problem was a default video card. They helped me very well and tomorrow I should get my new video card.

    Thank you for responding!

  • HP Envy 15 black laptop after the login screen.

    The laptop was working OK up to now just get a black screen after login. I can hit Ctrl alt del, but nothing happens

    Hello

    Try the following - this implies that you are under Windows 8/8.1.

    Stop of the laptop and leave it like that for 10 seconds.

    Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

    On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

    Select 'Advanced Options', and then select System Restore.

    Click on yourcurrent system O and then wait as the system restore window opens.

    Pick a point to restore at least 48 hours before that this problem occurred first and then proceed with the system restore.

    Kind regards

    DP - K

  • HP Touchsmart IQ770 Desktop, black screen

    Need help please, old 18 months IQ770, I turned on this morning and have a completely black screen. Blue indicator light is here and will fan but nothing else. There is a beep when I touch the screen, but nothing works. Anyone out there who can help me.

    Want to thank you millions.

    I did exactly as said and boy these all-in-one... I swear that every engineer has designed this crap should get shot.

    AAAAnyway brought back my gfs Touchsmart IQ775 back to life thanks to your advice.

    Took the $% # ^ tried reflow it, video card... eventually burn LOL.

    Changed the cable microphone vga LVDS # 1 to LVDS #2... and Bravo.

    I was able to install windows 8.1 then and now everything seems to work perfectly until now.

    Thanks comrade. Its been years that I've been in these forums, because I stopped using HP for this reason along with their products and the horrible customer service. Just to let you know.

    Peace out!

  • BlackBerry Smartphones Blackberry Desktop Software freezes with the message "Action Engine loading Configuration.

    I have Windows 7 Professional. My Outlook profile is stored on an Exchange Server and my Blackberry had previously beeng synchronization with Outlook in this configuration for nearly a year without problem.

    Recently, the software freezes the message 'Engine Action loading configuration' and is unrecoverable. I tried the following things to remedy the situation:

    (1) adjust the settings Organizer not to synchronize anything except the date & time. Still happens

    (2) remove all data from the device using Desktop software and try to resynchronize. Same problem

    (3) uninstall and reinstall Blackberry Desktop Software and try to sync with all of the original data and the empty deleted data Blackberry. The same problem.

    (4) tried to wipe off the full blackberry using Cmdr of JL, reinstalling the operating system. In this scenario, I can synchronize addresses, but once I sync calendar problems from ever happening and I can't ever sync it again (including later by deselecting the option of calendar.

    At that time I spent hours scouring Google for help and try the above items. This was a disaster for me because I rely on synchronization had given for work and have already from lack of things.

    I do not think there is something wrong with the Blackberry, because it works very well and works perfectly well after re - charging a fee, OS, etc.

    I tried to play with the balls of support, but because the software freezes before can synchronize calendar, there is nothing in the log that indicates if there is a file corrupted in the event calendar. Nothing won't change significantly in my calendar between synchronization worked and the day that he didn't.

    I tried searching the Blackberry forums and have found some info, but nothing useful. RIM does not provide phone numbers and support AT & T has continually demonstrated himself as worthless during my time with them.

    Are there resources left at all that I could try to move beyond this issue, don't waste any more time and be able to solve the problem?

    Thanks for reading and for any input that you are willing to offer.

    Although no one helped me with this I could help I put the steps that I followed down here so that if someone comes on this page of our friend Google, they will be able to try the same thing:

    I ran 'Fix' on the memory card in the Blackberry
    Ran CCleaner on my PC to clean the registry
    Reset synchronization in the Desktop Manager settings

    Finally finally I'm the synchronization again.

  • allow the launch of the desktop computers only with the view-client CLI commands

    Hello

    It is possible to restrict desktop graphical clients (web and non-web) launch and the launch of single command line interface?

    what I want to achieve this, is to restrict access to desktop computers to view associated with a physical location, while allowing "ALL users" to connect to desktop computers only when you get close to those and not distance.

    Looks like using the Kiosk mode to make the broker, authentication and connection of office and then disable the SINGLE sign-on and have instead users connect manually inside the VM, adapt to your usecase?

  • Get a black thumb with the error in the console

    Black inches during the initialization of image. I am trying to download pictures to my computer and then try to create thumbs on Mozilla and then try to download these images on the server.

    QA_User said

    Black inches during the initialization of image. I am trying to download pictures to my computer and then try to create thumbs on Mozilla and then try to download these images on the server.

    Please give more information about your question. Where you try to get rid of it?

    You can also attach screenshots to help us to learn more.

  • HOW TO USE INK BLACK ONLY WITH THE HELP OF THE PHOTOSMART 7520

    I would like to be able to use black ink about 99% of the time. Is it possible to install my HP Photomart 7520

    Default printer in black ink in the more economical printing option?

    Hello

    You can use black ink only for printing however ink color will always be used to service the printer. Once the color ink is too low to maintain the print heads, you will no longer be able to print to the color ink replacement.

    You can set printing black ink by going to control panel > devices and printers.

    Right-click the printer icon and choose Printing Preferences.

    There click Advanced button.

    Set Print as Gayscale as the black ink only and confirm the changes.

    Kind regards

    Shlomi

  • (Redirected) Dimension desktop computer infected with the Cryptowall virus

    My mothers computer has been infected with the Cryptowall virus.  She only uses it for the email there is really no important to worry about file.  However, I don't want to do a cleanup on it with maybe a reformatting of the hard drive and then upgrade its antivirus software.    The computer has been preloaded with Windows 8, but there is no backup disk to reinstall the operating system.  Where should I start?  I contact Dell with all the elements of computer here and get sort of a recovery disk?

    Thank you!

    Best of this post in the Virus & Spyware Discussions Forum here:

    http://en.community.Dell.com/support-forums/virus-spyware/f/3522

    Bev.

Maybe you are looking for

  • extended warranty online

    Hi, I bought a computer hp laptop on 31.10.13. The status of the guarantee indicated on the web is at 25.11.14 while the coverage must extend up to 31.10.16 two years extended warranty online was given in the offer to purchase. I am already registere

  • Photosmart HP 7510: New Samsung Galaxy S5 and eprint

    I got an I phone and it was set up to go to my eprint.  Now I just bought the Samsung S5.  It is configured to send emails to my printer and will do.  But, when I try to send it directly to my printer fails.  How can I configure my phone for eprint. 

  • LV application error

    Hello everyone... I use LV 8.5 (Win XP) code that I had updated to LV 4.0 and Win 98. Some shared libraries are 16-bit that I can't change. So I did file exe in LV4.0 (runs continuously) who communicates with these dll and return data to LV8.5 throug

  • Image garden

    I use Image garden to create labels to DVD I use once a year for graduation DVD. However, I need a way to backup my labels for obvious reasons of hardware failures or operating system. Judging by a few other posts on this, he, incredibly appears as i

  • Computer laptop flickering

    Hello colleagues HP forum visitors! Since last week, my laptop has been uninterrupted flickering from beginning to close down. The glitter is as a sort of contractions every 4 seconds approximately. They tend to be horizontal lines that occur near th