WINBOM. JOURNAL and FBALOG. TXT files are corrupted and unreadable

Similar Questions

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• Message: 'Ehtray' under the (x 86) HP program files are corrupted and unreadable, run chkdisk utility

  Original title: corrupt files and running chkdisk utility

  I get a message (with the yellow triangle) that "ehtray' under the (x 86) HP program files are corrupted and unreadable and run chkdisk.  I do not know how to run the chkdsk utility, but by running AVAST on the HP (x 86) program I have ID had two "unreadable" files, but cannot delete them.  It first appeared when I installed Webshots Desktop on my laptop, but when I tried to uninstall it, it wouldn't uninstall.  My PC just guard close after having been just a short time, so I need to figure this out!  Any help would be appreciated!

  Hi mama mia,.

  1. What is the name of the HP program?

  Try these steps and check the result.
  Step 1: Restore the computer to an earlier time when it was working fine
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Step 2: If the problem persists, then reinstall the HP program and check the result.

  You can get in touch with HP Support team for more help on the HP program.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• Satellite X 200: Toshiba Vista value-added download Pack - files are corrupted

  I downloaded the valuespack severaltimes for my Satellite x 200.
  By extracting, I get a corrupted message that the files are corrupt.

  What is the problem with the file?

  THX

  I can't believe this. The same version is available for several models of different laptops, and of course, you're the only one with this problem. I recommend you use a download manager. Try again.

• Satellite M300 - driver downloaded, the files are corrupted

  Hi all

  I have a Satellite M300 when working there, I bought in Asia.

  HARD drive died and had to be replaced with the nightmare of normal to find drivers, the main problem being the only site that recognizes the model number - PSMD4L Toshiba Asia. Unfortunately the dosent work section download drivers, I tried from different places, different computers etc. but all of the download files are corrupted and there is noway contact Toshiba Asia!

  Frankly I'm amazed that a company like Toshiba doesn't have a handle on all the models produced around the world + support for drivers simply incredible!

  How can anyway sorry yell someone has any suggestions, I get the drivers?

  Cheers for any help

  Rich

  Why do you think that the drivers are corrupt?
  Did you receive any error messages? If Yes, which?

  What drivers did you tried to install?
  What operating system do you use?

• The script files are corrupted in vista on my computer laptop r61i

  Technical support of McAfee said that my scripts files are corrupted in vista on my computer r61i laptop... How can I download and replace on a preinstalled OS

  * original title - scripts to repair files in thinkpad r61i of vista preinstalled v

  Hello DonSchaffer,

  1 script are. what files you referring?

  2. What are the problems you are having with the computer?

  3. are you referring to the file damaged desktop system?

  Please give us more information about the files that you are talking about and the issues you have with the computer. If the system files are corrupted on the computer, I suggest that you run the tool on the computer system file checker. You can check the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Why direct Director said suddenly that my files are corrupt? error 0 x 80070057

  I am able to add trim, split and change all my movie files .avi to randomly Live Movie Maker decides that half of my files are corrupt suddenly and must be removed or I can't even save a project.

  I am using lawless videos and trimming / splitting into smaller files, but it is not just happeneing to files that I changed, it's extremely random. All the files that I use is from the same destination, my SD card in my camera. Do not have problems with the map or the files in any other program.

  :/

  Hello

  The question you have posted is related to Windows Live Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The installation files are corrupted. You can buy a new copy of the program

  Whenever I try to install a new software or games and then permanently in error "the Setup files are corrupted. You can get a new copy of the program.

  Please help me...

  first scan your computer entirely with good antivirus.

• I get this message on my desktop - the Setup files are corrupted. You can get a new copy of the program.

  "The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
  Thanks Jim

  Original title: the Setup files are corrupted

  Hello

   
   
  1. What is the full/exact error message?
  2. When you receive this error message?
   
   
  Follow the steps.
   
   
  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
   
   
  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
   
  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
   
  Perform the virus scan and make sure that your computer is virus-free.
  
   
  Method 2:
  Run Microsoft Online Scanner.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
   
  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.
   
  Also run a scan complete with Microsoft Security Essentials, check out the link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
   

  For further assistance, post back with display of the event logs. Check out the link.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Response with more information to help you.

• Can not install downloaded 12 elements files are corrupt

  This time is costing me more than the cost of the program.  I spent hours to uninstall Photoshop elements 12, installation of Photoshop Elements 10, then my first 12 items was corrupt so I downloaded the installed after cutting in my Adobe, now it will be installed not and says that the files are corrupt.  I need to get this program on my computer, please.

  Windows 8, i7 processor, 16 GB of RDRAM, 3 GB memory graphics, internet access, problems of any assistance from Adobe.

  Hi timmyleeturner,

  Do you have any antivirus, firewall, or other security software installed on the machine?

  If Yes, then please try turn them off and re-download the software from the link below.

  http://www.Adobe.com/UK/downloads/other-downloads.html

  Also check the size of the installer on the website and on your machine.

  Kind regards

  Anand

• all downloaded files are corrupted / custom install

  fresh WinXP install again 500g driveASUS MB A8N - SLI ATHANLON 64 3500 + PROCESSOR amd

  All downloaded files are allegedly corrupt, which means no browser updated (using IE6), no antivirus, nothing.

  No matter what thouhts?

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +: 
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• XP MCE said dll files are missing, maybe others. Starting price. Runs. Must fix. My files are corrupt? Terrified Novice needs help...

  Hello

  Please help me solve this computer.  I am an elderly person, not technical and I need to fix it myself if possible.  I studied the system widely.  I don't have the skills or knowledge needed to implement a fix.

  What worries me, is that my files have been damaged by the problems on this computer.  I don't know how to say.

  The system was custom built, not a branded computer.  I have 3 drives, all Originals Microsoft.  XPMCE disks (there are 2) say 2005 on them, the 3rd disc says Version 2005 updates.  He said not cumulative on the third disc. I don't know what that means... I don't know there was also a cumulative 2006 for XP... final.  XP Pro is 2002.

  I installed updates as much as I could, but am stuck with SP2, and I know that the system is vulnerable because of the missing updates.   I want to fix non-destructive if possible.

  Langa claimed it was possible, but he did not speak MCE, but Pro, and they are not the same.  I know not what integrators were not allowed to provide (food?) discs with this particular Version.  I've never done of all disks (experience, is what you get right after that you need), but I'm not sure that the system was perfect when I got it...  I don't have any other type of disk.  I learned that one must save or image the system, so it can be restored.

  The system starts and runs. But the SP3 update can "t be installed.  A program to work indicating that a dll file is missing.  In addition, the system restore stopped working.  I was told the system restore often confuses things and can 'break' installed AV and perhaps other programs, due to conflicts between Windows restoration files and programs that are not part of Windows in terms of time.

  I've always run AntiVirus and MBAM.  I have the instructions step by step for what I could try.

  I would like to find a list of parameters that should be enabled or disabled in different areas... so I can check that they are correct.  The area called services and to uninstall Windows components, I worry.

  I have not really requires... because I don't know how to get the information on this computer.  I ran the Scan Now command and he said I should put in discs... There are 3?   I'm afraid to do anything until I have found on the backup and the possibility of corruption of my files.  I'll have to print files, rather than risk losing things.  My drive back to stop working, don't know if it is related to the lack of files or settings to be wrong.

  Thank you for reading this... I tried to write paragraphs, to make it a bit clearer, I hope that it appears that way.

  Bonnie

  Try to run, type: cmd cmd type: verificateur auditor files SFC SCANNOW once windows starts, insert the

  XP CD, leave the screen. The File Checker runs automatically, at least with XP home & PRO. Also check this

  link for info MCE & SFC. http://support.Microsoft.com/kb/909059

  In addition, sfc is thru, remove xp cd, type: CHKDSK C: /F agree to restart, exit cmd, restart the pc.

  If the problems persist, open the event viewer & see what problems or specific files are always in need of attention...

• Problems with importing photos using Windows - Photo files are corrupted in the Gallery windows

  I use Windows to import images from my camera (Canon Rebel EOS) to the computer (HP) and display them in the Windows Photo Gallery.  Recently, the photos in the Gallery become corrupt once downloaded, which means they download fine then when I open "Images" to see in the Gallery, they photos each are corrupted with ribbons of various colors, or the image is cut into strips to compensate.  It didn't happen when I uploaded the same photo files to another computer so I know that is not the fault of the camera or individual files.  I scanned for a virus (I use AVAST).  Can I fix this, or is there any other software I should use to download files?  I'm just a MOM ol ' ordinary looking to transfer the zillions of photos that I take my children.  Help!

  Hello

  Welcome to the Microsoft Answers community.

  Try to rebuild the database of photo gallery that should remove corrupted files that could cause this problem. Do follow the steps mentioned below.

  Photo of C:\Users\[username]\AppData\Local\Microsoft\Windows

  Gallery\Pictures.PD4

  Rename the file Pictures.Pd4 to Pcitures.Pd4.old

  Retstart the photogallery program check what is happening.

  Run a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning

  Anthony.

• Backup did not run on a laptop before be recreated now the files are corrupted after recovering the data.

  I ran a data recovery software that has found a lot of the loss of the files but the files are now corrupted. It is very important for these files restored to their original condition and work. Have tried many files repair software, coding and a simple fix with the "Open and repair" feature in XP. What would be the last result and hopfully more here on success?

  I'm afraid that you have learned a painful lesson about the importance of backing up your system.  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is about $90 these days and a very good FREE backup program is the Easeus todo backup free that you can download from
  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.