Window 7 64 bit using 13.4 GB of Winsxs even after speaker

Similar Questions

• Windows 7 64 bit using 3 GB of 8 GB RAM when idle.

  I've noticed recently that Windows 7 64 bit using 3 GB of RAM slowed.  When I start first of all, the use of the RAM is about 1.2 GB or more.  However, after that my computer has been for some time, that number slips slowly up to 3 GB without me all other running programs.  I thought it could be virus/spyware/malware, so I formatted and did a new install.  The same day as the new installation, I noticed the same behavior.

  Is this normal?  Windows 7 is recommended to use 3GB 8 GB inactive?

  Thanks in advance for any help!

  My issue was not with Windows 7 using large amounts of RAM "at random".  The question I saw consisted of RAM usage to leave about 1 GB and slowly creeping up to 3 GB and stay there until I rebooted.

  Through several days of trail and error, I found the problem.  In general, I use a download manager to download files (free download manager, FDM).  There is apparently a problem with FDM and Windows 7 I have observed that the question of the RAM with FDM run and I have yet to observe with FDM, no matter what I do.  Either way, I used this same version of FDM Windows XP and never had any problems with the use of the RAM.  Therefore, I'm not sure if it's a FDM problem or a problem with running on Windows 7 FDM (although my experience with FDM and XP leads me to believe that there is a problem with FDM running on Windows 7).
  Without FDM running Windows 7 RAM use is between 880 MB and 1.5 GB.  Everyone know the RAM on this amount use likely has several processes that run in the background as Windows 7, when idle, should never require more than that.

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• OJ4580 install on Windows 7 64-bit using OJJ4500_full_13.exe fails, 'No driver found'

  Install an OJ4580 on Windows 7 64 bit home edition premium installs all the junk, Center solution, the Manager of documents etc., and then told me there is no driver for the printer in the program that I just downloaded on the website of HP.  Very funny HP, now where the real install program?

  Hello

  It seems more likely that spawn something wrong with installation.

  We will try these steps and let me know if that can help you:

  1. Make sure the printer is powered on and connected to your PC.
  2. Click on the start menu and type %temp%.
  3. Open the Temp folder in the search results.
     
  4. Click CTRL + A to select all files and delete them, no need to worry about delete files as all the content of this file is temporary.
  5. Launch the installation files once more and allow the extraction complete.
  6. You will find a new folder in the temp folder, starting with 7Z.
  7. Open the folder, and then open the subfolder named as the model of the printer until you see the content of the whole installation.
  8. Right-click the address bar and select copy the address.
  9. Go to control panel > devices and printers.
  10. Right-click in the background area, and then click Device Manager.
  11. You will find the printer listed under peripheral Bus USB or other section controllers.
  12. Make a right-click on the name of the printer and select Update driver software.
  13. Select Browse my computer for driver software.
  14. Paste the file copied into the box and click Next.
  15. Follow the instructions on the screen, which should point the operating system to use the correct browser and the installation should appear and complete.

  Please let me know if that can help solve the problem,

  Shlomi

• Installign 7 64-bit windows Vista 32-bit using the upgrade disc

  I have a toshiba satellite running a 32-bit vista. I got the upgrade windows 7 toshiba drive which contained both 32 and 64-bit. When I did a clean install of windows 7 it installed 32-bit. It gives me an option to install the 64-bit. Is it possible to install windows 7 64 bit?

  Windows 7 32-bit and 64-bit are on a separate disk, they are not both on a single disc.

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• The upgrade from 2 XP Machines to Windows 8 32-bit using CD 1.

  I am planning to purchase and install 8 32-bit Windows and then switch to 8.1 by the store.

  I have the new Mobo and parts to come for my laptop and have already spent $300,00 +/-to prepare the desktop computer.

  My office has full-file XP SP3 with a genuine Windows key.

  I also have a laptop that died so hard that I have to do a Complete install with a new key.

  I understand the new key, but;

  Can I use the same installation CD and use the Office XP key that I have to upgrade, without buying another key?

  Both computers are guaranteed officially custom and past.

  Hi Robert,.

  Thanks for posting the request in Microsoft Community Forums.

  You can install Windows XP by using the CD, however it is not possible to use the same product key to activate that has already been used on the desktop. I suggest you perform a new installation of Windows 8 on laptop with the new retail product key. Therefore, you may need to purchase 2 product key of Windows 8 to activate both computers.

  How to perform a new installation of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  Hope this information helps. Response with status so that we can help you.

• y at - it a fix for Flash Player installer does not not on windows 7, 64-bit, using firefox?

  I hit the download link, permission from windows, and the Flash Player installer window comes up, but does nothing. I left every day when I went to work, come home 12 hours later and it was still just sitting there not to install it. Is there any solution for this? I looked everywhere and nothing of what I found worked. even suggestions on the adobe support page does not work...

  And you used on the link offline installers that Andy post:

  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

  If so, please send the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

• Update for Windows 7 64-bit using the 01/05/11

  Hello peeps

  New to Windows 7, as most of us la!

  But after the critical update on 01/05/11 my mouse starts to spin and the and after about 5 minutes truns just make me unplug and insert it again operate

  tried a system restore to that date and a scan to see what that the affected update and the mouse is on the list. but he will restore at this point and it's the only one!

  The mouse is a microsoft USB optical intelliemouse.

  I have also deleted the drivers and restart still same prob

  Help

  Hi Ross1971,

  1. what happened when you try to perform the system restore?

  Method 1

  See the Microsoft article and try the steps mentioned below

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Method 2

  If the previous step fails, see if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also check the update is causing the problem with the mouse.

   

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• [N900 / WNDR4500]-cannot use / access some sites web/services even after reset to factory settings

  Hello

  I just moved into a new home; my old cable modem was damaged during the move, and so I had to replace it (same manufacturer, newer model). The problem started then with messeging (Messenger of the LINE) service not working at all when the wifi - direct connection has worked very well for the PC and the phone worked when using mobile data. Until now, it appeared that this app has been affected that I could still do other things very well (for example surf the web, email checked).

  I tried the firmware update and later reset the router to the factory settings, or even delete the app and reinstalled it, but they've made the app worked part of the time only. However, I noticed recently that I couldn't access certain Web sites via wifi, too. Again, problem has disappeared during the use not wifi.

  No idea on how to solve this problem is highly appreciated.

  Thank you

  b.

  go to settings... internet configuration... Select use PC MAC address... restart the modem and router

• My ram is 4GB (3.8 GB), why windows 7 ultimate 64-bit use 3.8 GB to 4 GB of ram?

  My ram is 4GB (3.8 GB), why windows 7 ultimate 64-bit use 3.8 GB to 4 GB of ram?

  I want a solution for this problem.

  The system still requires little RAM or not 64-bit.

  If your computer has more than 4 GB of RAM installed, Windows 7 64-bit using 4 GB and more which is what it is supposed to do...

  You do not have a problem...

• HP Deskjet 9300: HP Deskjet 9300 driver Windows 7 64 bit

  I have an old HP Deskjet 9300 and it does not work with Windows 7-64 bit using the USB cable.

  I tried alternate drivers 1220C HP Deskjet 6980, but both does not work either...

  I solved this problem...

  Follow the steps in the link

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01796821 & DocLang = in & docLocale = en_US & JumpID = reg_r1002_usen_c-001_title_r0021

  but do not forget steps 3 and 4...

  It's easy...

• Can I put an old computer to Windows 7 (64 bit)?

  I have a desktop PC, HP Media Center m7260n, bought in 2006. At ran Upgrade Advisor: other than the need to do a clean install of Windows XP and an Aero compatibility issue, I respect the basic requirements. I have 5.5 GB of RAM installed, but it currently can only use about 3.5 GB of it. I know that I need a 64 bit OS to unlock the rest, but I clean up can I install an OS 64-bit on a machine with a motherboard ASUS P5LP - THE (HP/Compaq name: Lithium-UL8E)? I guess I am wondering if my computer's hardware is too old to install Windows 7 64 bit?

  Hello

  Mhenick wrote:
  Even if I don't have a 64-bit processor?

  Yes.

  What CPU is installed in your PC? If it's a Pentium 4 Prescott or Pentium D, then it is 64-bit capable.

  Kind regards

  ERICO

  Published by erico on 11/11/2009-10:49

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.