window for vista drive

Similar Questions

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• Update Windows for Vista - NVIDIA GeForce 8400 GS driver errors

  Update Vista Home Basic 6002:SP2.  Secunia Personal Software Inspector and MS Security Essentials confirm the system software is updated.

  Windows Update optional update for NVIDIA GeForce 8400 GS on 4/5 and 4/11.  Updates have been declared as 'Successful' but has caused problems of compatibility with the resolution.  (http://winqual.microsoft.com/support/?driverid=20418057) More details below.

  HW - Dell 530 with GeForce 8400 GS with BIOS 62.98.71.0.5 - 512 MB of memory dedicated - 767 MB shared memory.

  CRT is detected as driver MS running generic PnP 6.0.6001.18000.  The display is an AMW CM1722PF 17 "CRT with a preferred resolution of the 1024x768x70Hz.  (IIRC, MS drivers for Intel 8031 correctly detected VGA display modes, rather than generic report.)

  On both NVIDIA driver update attempts, Windows Update reports the success and I rebooted (despite the lack of obligation to restart).  Display was OK on the screen connection, but limited to 640 x 480 on desktop after login.  Edges of the Office had fallen.

  In addition, Panel-> NVIDIA Control Panel translates "the NVIDIA Display Panel Extension cannot be created... Possible reasons include the incorrect version.  Reinstall display drivers can fix this problem. »

  After the failure of 4/5, I uninstalled Windows Update display drivers and reinstalled on reboot.  Got the NVIDIA Display Panel and appropriate video modes.  Everything was going well until we repeated this Windows Update NVIDIA driver update fiasco 4/11.

  Have not repeated the manual Reinstall driver this time, I'm puzzled why Windows Update can't get this right.    This is a very common piece of hardware and you would think that there is regression tests for driver updates.

  This makes me wary of Windows Update.  Suggestions?

  Hello

  I posted an incorrect link, changed now.

  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  The TechNet post link also has the same information.

  Or here - manually on a single computer

  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Those who work in many cases, I've tried. If you have a current Windows
  Update that tries to update a driver, then right-click on it in Windows
  Updates and HIDE. There should be no other available.

  I hope this helps.

• Qosmio F20: I need NVIDIA GeForce Go 6600 for Vista driver

  I need NVIDIA GEFORCE Go 6600 for windows vista driver. But when I try to put the old driver he know that the driver, but windows vista does not support.
  Thank you all answer me.

  Hello

  Unfortunately, it seems that you will not be able to use the Vista me TV tuner!
  The Toshiba didn't publish all drivers vista for this unit and it seems that the drivers will not be published especially for this device ;(

  Maybe you will test the graphics driver from another source

• Updates to Windows for VISTA

  Have not received updates of windows (VISTA) since August 20.  On the surface it just doesn't seem fair.  I don't have the error codes on the display of Windows Update.  I am out of updates or Microsoft has stopped support for update for VISTA?

  Try the manual operation of microsoft update, try this link, look for the update from microsoft. In addition, more than a dozen

  updates should come from update since August.

  https://TechNet.Microsoft.com/security/bulletin/

• Qosmio F20: I can't complete this NVIDIA GeForce Go 6600 for Vista driver

  Dear Francisco,
  All the friend when I install this driver. It always shows me the message CE DRIVER INCOMPATIBLE WITH THE MATERIAL. Then I try to click the yes button to try again. The installation was carried out, but when I restart the machine then the message appears again. And it is not finished to install the driver. What should I do? I have used the toshiba qosmio F20.
  Here is the message from the print screen.

  http://www.sendspace.com/file/fjvbca

  Thanks for any response.

  Hello Nera,

  I can't find a reasonable explanation for what is happening on your machine. This driver should work with the Geforce go6600.
  The only thing that is different of the G20 is the amount of video memory it uses. G20 comes with 128 MB of video memory and F20 comes with 64 MB.
  It is a potential conflict, but I'm not sure about this to 100%.

  Well, let's say it all over again:
  1 are you sure that your model uses the Geforce go6600 or it uses the FX5700? I know most recently F20 models use the go6600 64 MB.
  2 do you have removed all traces of the old nvidia XP driver that you installed initially?
  3. or, another option, you have performed a clean installation of Windows Vista on your PC? and then I tried to install the nvidia driver? This is important.

  Please, do a right-click with the mouse on any part of the screen and click on customize, open the properties of the adapter, take that screen and post it here.
  As you can see in the following image:
  http://www.rabayjr.com/Vista/qosmioadapter.jpg

  Then, open devices, properties of the graphics card, driver manager
  As you can see here:
  http://www.rabayjr.com/Vista/qosmioadapterdrv.jpg

  Need to know what is informed about these two entry screens.
  Mainly the the BIOS version of your nvidia graphics card
  Let me know

  I'll try to find other Windows Vista drivers for your model.

  The problem is that I don't have a F20 with me right now, to check it out and fix it for you.

  Francisco

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• Update Windows for Vista 32

  Windows Update does not work I get no Khvan my router but can connect to the internet

  If you still experience the problem of origin after all these steps, you can proceed with your plan to repair or formatting of your system. You will need Windows Setup DVD to repair. Once again, the steps proposed by Martin is composed with graphics, it should help in the realization of this task.

  However, if your goal is to make a new installation, you can either use the recovery partition on your system (usually drive D :) or the CD/DVD provided with your PC to install your PC back to factory settings. Depending on the brand of your PC, there are a combination of keys on your keyboard, you will need to press when your computer to restart to activate this recovery option. Also, using the Vista DVD of Installation, you can choose to do a new install instead of repairs. Just keep in mind, you need to reinstall some of the drivers for the devices on your system.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• On the removal of the updates of Windows for Vista

  I have Windows Vista 7.  If I switch to Windows 10 I continue to get automatic updates from Microsoft?  I understand that Microsoft supports is no longer upgrading the Vista operating system...

  Here are the dates of extended support for all current versions of Windows.

  Windows end of life
  http://Windows.Microsoft.com/en-us/Windows/lifecycle

• Update Windows for Vista

  2 updates keep asking to be installed. Yesterday I installed them 6 times and this morning again once they tell me that I have to update. What is going on. Makes me very scared that something is wrong with a security problem with my laptop.

  A security update to the download size of Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Windows Vista and Windows Server 2008 x 86 (KB3074230): 1.2 MB

  A security update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Windows Vista and Windows Server 2008 x 86 (KB3074550) download size: 1.6 MB

  Please send an answer if someone knows the answer,

  Thank you

  Response by number:

  1. are you get error 0 x 80070643, 0 x 643, 0x8007066A or 0x66A (s) when you try to install KB3074230 & KB3074550?

  2. is Microsoft .NET Framework installed v4.5 or c4.5.1 or v4.5.2?

  3. KB3074541, KB3087038, KB3087039, KB3086255, KB3087918, KB3084135, KB3069114, and/or KB3087135 listed in installed updates (not update history)?

  4. are you familiar with "registry cleaners" (e.g. of CCleaner Registry Cleaner component;) Comodo System Cleaner. Advanced SystemCare. Advanced System Optimizer. Glary Utilities; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; Norton PC Tuneup. PCTools optimizer; PC Doctor; Registry Mechanic; RegCure; RegClean Pro.  Registry Booster; SpeedUpMyPC; System Mechanic; TuneUp Utilities; WinMaximizer; WinSweeper; Sage healthcare 365; Wise cleaner)?

  5. do the same computer (not the same problem) as in that previous thread of yours?...

  ... I did a system restore to clear and [restore] to the original. It seems that I had a virus after Kaspersky virus removal. He could not take off because the cmd.exe screen would say access denied [System] path not found every time I tried to do a virus removal.

  http://answers.Microsoft.com/thread/e1aea999-6039-44f0-a9f6-7c1ccfe52fe5

• Empty Windows features window for Vista Ultimate

  I tried all the solutions provided in the Microsoft Web site using links below.

  I installed the analysis tool and installed the hotfix. but still does not.
  http://support.Microsoft.com/kb/931712
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/blank-Windows-features-box/74341068-b3ff-448A-84db-73cf2341276a
  I also tried changing the display settings, update of flash player, restart the system... all that...
  or, please help me to install IIS with another option.
  -Kumar

  Kumar, use links below

  http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/
  For permission to remove the registry editor
  http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

• Getting the 80070005 error when you try to update Windows for Vista 64 X

  Even if my computer is configured to automatically download Windows updates, it seems he never succeeded to date.  When I push an update, I get the error code 80070005.  I can't find a solution for this error.  Have no problem computer operating, except cannot get Easy Photo Print to Canon to work.  Whenever I try, I get this message: Thunking spooler APIs from 32 to 64 process has stopped working.  It will prompt you to get an update of Windows.

  Hi, Tom H7193,.

  You can read the following article and try the steps and check if you can install Windows updates:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  http://support.Microsoft.com/kb/968003/en-us

  Note: Applies to Windows Vista.

  You can also try to download the latest version of the printer drivers for Windows Vista 64 bit and check:

  http://www.USA.Canon.com/Cusa/professional/products/printers

  Hope this information is useful.

• My dv7-1232nr using Windows 7 had an optional update from Windows for my driver Atheros AR5007.

  When I try to install the update, my computer freezes and I have to do a system restore to remove update to make it work.  If I go through the Device Manager and the attempt to update the driver, it makes my pc unusable.  I can't find anything about this on the HP website.  HP has a patch for this network card?

  It worked!  I downloaded thedriver.  Then uninstalled the current driver before installing the new driver. It took a little longer than I expected to install.  I had a Windows security message indicating that Windows can't verify the Publisher of this driver.  I chose to install this driver anyway.  I guess this isn't a problem.  I had to set up my internet connection and again security code.  Thank you very much for your help!

• Windows for Vista update is not updated.

  The update will try to update and install, but when he finishes, he informs me that he was unable to be updated. I already tried the FixIt application and it does not solve my problem.

  Hello

   
  Follow the steps in the below link and check if the problem still persists.
  Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0 x 80070246.
  http://support.Microsoft.com/kb/942968
  Hope this information helps.