Window front jumping up and down (LabView 2010 SP 1)

I have a bug problem with dynamically opening and running a VI.

The VI below is compiled into a DLL:

With that, I opened a secondary VI to display the results. That VI is called multiple times in a loop. It works fine, but I was annoyed by the flashing of the menu bar and the toolbar. That's why I added the 'FP. ShowMenuBar' and 'to. Visible' to hide those. This causes the Panel window before jumping up and down on my screen. Is this a known bug (I presume it is) and is there a work around?

One other minor annoyance is that open the front panel, close it and then open it again cause the façade to be open in the background, and I have to manually move it to the foreground. I thought it might be remedied by adding "FP. IsFrontmost', but it does nothing.

OK, I did the VI reentrant and added the option "prepared for reentrant run" in the box "open VI Reference. This is the VI opened as a clone and stop the blinking of the menu and toolbar.

As a bonus, the CPU dropped load. (But I do not see why).

The façade positioning mind again, but did not understand.

Tags: NI Software

Similar Questions

  • Windows Firefox keeps jumping up and down.

    I downloaded the latest version of Firefox, but I have a slight problem. Everytime I open Firefox it jumps up and down. How can I stop it?

    This has happened

    Each time Firefox opened

    == Earlier, I downloaded the latest version of firefox 3.6.6

    See if this helps you:
    https://support.Mozilla.com/en-us/Forum/1/729375?#threadId729647

  • Satellite P10: Graphic problem - pixel jump upward and down

    What's wrong? If I move my P10, when it is turned on, the graphics sometimes work with failure - pixel jump up and down and the perspective is wrong materialized. What should I do? where is the problem?

    Thanks for your answers...

    Hello

    On this path, it is not easy to tell what the problem may be, but I guess that there is some malfunction of the equipment. Believe me, just intensive investigation may give you more answers.

    The only thing you can do is to reinstall the unit with recovery media and check if it works again. If Yes, what is certainly a hardware problem.

  • custom PC open my file and when I get in there jumping up and down.

    Why cant I get in my failure it takes 1 min ore then and when I get in there jumping up and down

    I've seen this before. Your mouse is defective.  Try a different mouse.

    Doc

  • Why my screen jumps up and down unexpectedly in Vista?

    my screen jumps up and down even if I do not use my mouse. When I try to set the screen from left to right, it slides to the left again once he will not stay in place.

    Hay thank you very much for your help, but the laser mouse was broken.

  • Noise of blackBerry Smartphones by clicking on a call and a volume bar jumping up and down

    Hello

    I'm having a problem with my Pearl. This morning, as soon as I start or receive a call, a rattling noise starts coming through the speaker who will cancel the person at the other end. The click is regular and when I activated the loudspeaker and could look at the screen I noticed that the volume bar is jumping up and down too...!

    It seems not important whether it is an incoming call or outgoing, or if the speaker is turned on or not, I could not test it yet with the helmet, but I'm going tonight and see what happens.

    No, I didn't fall this morning...

    Any help much appreciated!

    Alex

    I had the same problem with my 8320 which lasted three days.  I think that the problem is caused by the headphone.  The soft reset and wiping the phone it only, she began to work again after the insertion of helmet and move the headphone jack.

  • Jumping up and down

    Would you take a peek here: AXIA ADVOKATER

    Although blocks are placed the same on every page, they seem to jump up and down when moving from one page to another. What's not here?

    Is the bar on your master page? The jumping is the update because bars are of different colors and they also seem to be out of alignment (page width) for me, but I needed to see the files to be sure.

  • When you use my wireless mouse, the page jumps up and down

    Then comes my mouse wireless, especially the Center wheel button, the page I look at starting to jump upwards and downwards. What can I do to fix this?

    Often scrool wheel controls the location of the page on the screen and can work automatically when you press the wheel of screlll (perhaps by accident).  Try making sure you don't have puch down on the scrool wheel and may stop this beheaviior.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Reading and videos jumps up and down regularly and thoroughly

    Number of A of the sequences that I have edited have a movement back and forth minute but noticeable.  See, for example, http://www.youtube.com/watch?v=hely09sD6gY , you'll notice that only the video image goes up and down, not any stills or StudioCrasher watermark.  Initially, I thought it was the video source that I had imported, but on a more recent project, I noticed that it also does with a secondary video camera images. 

    I also note that this does not happen on the video source first, just reading the edition and in the exported video.  So there must be something in the first.

    I tried everything, including the pursuit of endless discussion forums, but I can't get to a solution or a workaround.

    Any ideas?

    That only your video is moving and not overlays that concludes that there a differce in the original material and the parameters of the sequence as you edit in.

    Tripple check your hardware and your sequence settings. What I see in your clip is a framerate problem.

    You want to invest in the FCP is a choice only you can make. Apple is declining in this most difficult time, then they did in the early 1990s, only now, Steve is not coming back...

  • RoboHelp10 in Windows 7 64 bit and Office Word 2010.

    Hello

    I installed RoboHelp trial in Windows 7 64 bit with Office 2010.  But the Office 2010 file format is not recognized in RoboHelp.  Word 2010 is not listed under options.  How to configure RoboHelp, such as Word 2010 files are recognized by HR.

    Soni

    Adobe (or Macromedia who owned RoboHelp before purchased Abobe) have not changed the RoboHelp for Word in a long, long time. So if the documentation says that Word 2010 is not supported, it is not. Your only option then is to use a supported Word version or hover over using RoboHelp HTML.

    If you produce a CHM file is by far the best option. Why? To start, it uses the actual HTML source code. RoboHelp for Word does not. He uses the word. It can convert Word to HTML file (very well) but the result is widely accepted to be hopeless. So, you are likely to get all sorts of questions.

    It's your choice but producing CHM of the RoboHelp for Word application is like trying to run a 100 meters race while drinking a cup of coffee. It can be done, but it will slow you down and do a lot of damage in the meantime

  • screen jumps up and down

    my computer screen will be not stable on any screen that must be read.  It selects all the options under a heading and flashes by each of them.  Is jumping around so much, now that I have bad typing. Have you tried the ideas without result in case of problems.

    Hello

    I noticed that you have created another issue with the similar question; have you tried the troubleshooting steps suggested by 'Vinod N' in the following link.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/screen-flickers/71916a50-cff5-4892-A4BD-cb92ae0f832f

  • Treo 755 p and Windows - HotSync jumps calendar and Agenda - "Conduit DateCond.dll: no link found for the Creator ID 'date'." Conduit did not run. »

    I've owned a 755 p for almost a year now. For much of this time, my hotsyncs were jumping the Calendar/Contacts and calendar apps. These two work very well on the Palm Desktop and on the Treo itself. I checked the unit and the palm Desktop for corrupt files. There are not. When I was with Palm Desktop 4 (before 6 is available for XP), the lines were always listed as disabled. I could help and do a hotsync, but no data has been synchronized and would return to being disabled. If I tried to set it as enabled by default, the Hotsync application would break! So, I've lived with this absurd situation for 6 months now. Finally, I tried upgrading to Palm Desktop 6.2 and had no problem, but the problem persists. HotSync on the desktop PC simply ignores these lines entirely, even if it does not display error messages after a sync. The lines are listed as enabled.

    I made a full backup and then uninstalled Palm Desktop 6.2 completely. Restarted and re-installed Palm Desktop 6.2 and tried to sync again. The problem persists.

    My next step (and where I am now) would allow to debug and documented in the Hotsync application logging. Once I did, I discovered the specific problem, which apparently is entirely hidden from the end user. Here are the specific journal entries:

    Led DateCond.dll: No association is found for the Creator ID "date." Conduit does not run.

    Led DateCond.dll: No association is found for the Creator ID "SNLT". Conduit does not run.

    Led AddrCond.dll: No association is found for the Creator ID 'addr '. Conduit does not run.

    Led AddrCond.dll: No association is found for the Creator ID "PAdd". Conduit does not run.

    I was not able to find something on the Internet about these errors. Nothing on the Palm site, nothing in these forums. I checked the database files are indeed on the handheld and have good creator ID. I don't understand how a complete re-installation of software still leaves it with a kind of missing association. But clearly there is something that lack prevents Hotsync to understand exactly what it is supposed to do here.

    I can't just wipe my machine and start over. I have a lot of contacts and calendar on the device entries that are not on my PC and vice versa. Find and fix all those differences manually would be months of work with my limited free time. So if anyone has any suggestions on how to solve this problem, please let me know. And no, I'm not going to waste time calling support Palm. I gave up on the phone with Palm years ago support.

    It's part of the problem. You might want to hard reset the device, and then rename the folder to BACKUP on the PC. (CProgram Files/Palm or Palmone / * Hotsync username * / Backup.) Change to the old files then synchronize with your existing username.

    Message relates to: None

  • Apple tried to migrate from Photoshop CS6 from an old computer to a new one for me. The icon doesn't jump up and down and does not open. What should I do?

    !

    Hello, Victoria,.

    Please try to uninstall and reinstall the software.

    You can refer: Creative Suite 6 Installation Instructions

    Download Creative Suite 6 applications

    Please try and let us know.

    Concerning

    Bianka Attre

  • LabVIEW 2010 executable runs under windows xp, but not in windows 7

    Hi all.  Here's the situation.  We have Labview 2010 professional development on a computer running Windows XP.  I designed all my programs with this PC.  We have another PC which has Windows 7 with no Labview.  I'm trying to make the executable files and put them on the Windows 7 PC.  I have been here three executable files and move the Windows 7 PC.  One of the executables work correctly, the other two interrupt immediately.

    Executables that stop have temperature limits and the program is apparently seen a low temperature and so stop the program.  Yet, these same executables work fine on the PC under Windows XP.  What seems to be the case, is that the program is expelled before allowing himself read the temperatures.  I use the modules of the series C 9213 and 9211 with 9188 Chassis.   My programs are showing 0 for temperatures.  Well, it's certainly in the low temp limit, so the program stops.  However, she should not do this.  I know there is little delay with the playback of all thermcouples in 9213 and 9211 modules, but this was not a problem with Windows XP.  Even if the program starts from scratch on the XP PC, temperatures immediately appear, or appear after a second or two.  Yes, I've rarely seen a temp 0 on the XP PC, but the program doesn't stop; Give it a second or two and the time appear.  Why is it that happens in Windows 7?

    An executable that works has no measure of temperature.  It uses only 9481 modules and run the solenoids at a rate of about 0.2 seconds.  This executable works fine on both computers.

    So what - this on the modules of temperature reading that is causing a problem in Windows 7?

    Other installation data :

    -The XP PC has the updates Labview 2010 is compatible with

    -The PC Win 7 not the latest updates of Labview 2010 there are has compatibility problems.  National Instruments has given me the compatible components, and they has several levels down by the most recent (for example MAX vs MAX 5.6 v14.0)


  • Is it possible to build a project with Labview 2010 on a Windows XP system, which is useful for a system with windows 7 on it?

    Hello

    I intend to use Labview 2010 in no time.

    But before I go to use it I have a few questions.

    1. I know that it is possible to run Labview 2010 in an XP environment. But is it also possible, when running Labview 2010 on an XP system, to build a project for a version that is useful in a Windows 7 environment?
    2. Or should I run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?

    Please give me some information.

    I hope to hear from you soon.

    Kind regards

    Kenny

    the file (.exe) is also compatible with xp and seven, no need to change anything...

    Concerning

Maybe you are looking for