Window - no disc - Exception Processing Message C0000013 interferes with the mode 'sleep'

Similar Questions

• Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I get this message pop up randomly. Any ideas on how to get rid of it, or what to check. I can leave the computer, walk and pop message. Makes me crazy.

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I was looking for a solution to this error and found the blog entry from GFF #5 to be the answer.

  http://forums.techarena.in/Windows-Update/1009223.htm

  "The answer lies in the words" Windows: No. disc ', your PC is looking for a USB.
  device - a USB stick or a cell phone, for example - that you recently plugged
  and removed without using the option 'remove hardware safely' in the
  lower right part of your screen. The last USB device you used
  back in the USB port and then use the option 'remove the software safely.

  The pop up message will disappear. »

  In my case, I didn't plug the USB device, I just need to click on the "Remove hardware safely" in the system tray and it say remove the device that is connected is more.

• No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  Hi I am running Windows XP Media Center version 5.1 SP3.

  Automatic update of MSFT is on. When he went to install the last update, this error started to appear. I remember offline a disk or flash drive. To remove I have to click Cancel like 10 or 20 times. How to solve this? Thank you!!!

  Hello

  Step 1: In some cases, the problem occurs because of a virus or malware. Before you try the following options, perform a scan of the computer. To do this using Microsoft Security Essentials, visit the following Microsoft Web site:

  http://www.Microsoft.com/security_essentials/default.aspx

  Step 2: If the problem persists, you might find that a device that has been previously deleted is still saved. In this case, you can solve this problem by removing these devices.

  To do this, click the remove the device safely in the notification area and remove any attached devices is no longer.

• A message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c

  Hello

  How to solve the problem of my computer with this message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c. It appears everytimes I start running my computer.
  After a few minutes work on my pc that these messages is displayed. clicking on it after about 5 - 6 times makes it disappear for another 2 minutes, until it again...
  Thanks in advance

  Mark

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS.

  Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS. By selecting CANCEL or CONTINIUE four times to close the box, but in a short time box reappears.

  I refer you here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

  You can expect ad try some things.

  You can actually ask why forums MS Answers just can not help with XP problems?

• While booting XP, do "Windows - no disk Exception Processing message c0000013" error

  During the first part of loading Windows, I get "Windows - no disk Exception processing message c0000013; Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c ".  Then I have the options "Retry, Cancel, continues.  Will work only "continue."  Windows will not load until I have deal with this message.  The message reappears while other applications are loading.  Simply, this started happening about 2 weeks ago and have tried everything, except food.  I don't know what caused this error, but I want to fix it.

  Thank you. Until I'm your response that I tried my PC Doc Pro ver 5 and it seems to solve the problem.  However, I went into the registry and made the proposal to change anyway.  Then, I created a restore point and restarted. Thanks again.

  todrico

• When do the computer it says Windows no disk, Exception processing message and then gives the number.

  When I connect to my computer, I get this box and it says ' windows no disk, exception processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c "downstairs if said"try to cancel still continue"I have cancel us or X out of the box, but you have to do 10 to 20 times to go down.  So when you go on the internet, it did the same thing.  I want to know what it means and how to get rid of.  Help, please.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Microsoft Comfort 4500 wired mouse appear to interfere with the mode 'sleep'.

  After that I installed the mouse and downloaded the drivers, now the computer won't mode 'sleep'. The screensaver works. I had a similar problem with a Logitech wireless keyboard, but I found the solution to this on their Web site. Any help would be appreciated, thanks.

  Hello

  Hello

  1. don't you make changes on the computer before the show?
  2. not this problem occurs when you try to connect to another mouse on the computer?
  3. you receive an error message?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  A computer that runs Windows Vista seems to sleep and then immediately wake

  http://support.Microsoft.com/kb/927821

  Method 2:
  If the problem persists, then perform a clean boot and check if it
  is due to any third party software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• After logging in to Windows Gets an error message: Exception Processing Message c0000013 75.

  Original title: no disc dialogue Exception Processing Message c0000013 75...

  When I start Windows XP SP2 the dialog box next No. disc appears from time to time.  This started after I uninstalled the software incompatible with Windows XP.  The 75 begins a series of numbers.  The PC is several years old and did not know this before exception.

  Setting prevents just the pop-up message annoying - if there are some problems with the device, the event will always be recorded in Event Viewer.

  I've never had anyone report problems after you make adjustments - just that they are happy, that they no longer see the message.

• Exception processing message c0000013 when start XP.

  I have the error message when W XP start: Exception processing message c0000013 parameters 75afbf7c4 75afbf7c 75afbf7c.
  I can't close this error message.
  What can I do?

  XP is maybe damaged.

  First of all, you should check the memory using www.memtest.org
  And test the HDD using Hitachi DFT (google is your friend)

  If these tests pass, you can try to return to a previous configuration. Press F8 at the startup of Windows start and select the last known good configuration.

  If this does not work, you may need to backup your data and reinstall Windows by running the recovery using your Toshiba recovery disc.

• Stat of the system upward with the error: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Original title: Getting a weird error message. Seems to be the floppy driver.

  Hello. This problem everything seems to start when I changed my drive letters. Finally, I think it points to my floppy drive A.

  I get these error messages when I start my computer. Windows tells me this: No. disc: "treatment of Message of Exception c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". It happens about 8 or 9 times then goes away.

  I have several internal hard drives, 2 optical drives, A floppy drive, a card reader and a printer. I decided to shift the drive letters down after hard drives since I have recently installed a dual-boot and needed earlier letters to the editor. The problems started before the dual-boot has been installed. Changed this example of drive letters: g-i, h-> j > I-> k, etc. The main readers have remained the same.

  I uninstalled the floppy drive and the controller, Windows re - installed after re-booting of course.

  I disconnected Ribbon floppy motherboard and the power supply. The messages stopped. I then uninstalled the floppy drive and the controller in Device Manager. I reconnected it A floppy Ribbon and power, loaded windows reinstalled the drivers and then gave me the error emssages once again.

  I have a DVD of Windows XP Home Edition 32 bit SP3. Telling me to do a repair isn't the best idea, because nobody has explained how it works. When the DVD goes in the car or at the start: there is no repair function.

  Thank you.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• How can I fix "exception processing message C0000013.

  XP service pack 3, but often get suite arise "Exception processing Message C0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bfc" all alternatives possible pls?

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set the value to 2

  (2 = off).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• Exception Processing Message c0000013 parameters 75b6bf7c at startup

  Possibly caused by an update to Windows XP. I get this annoying message whenever I start my computer. It starts with "Windows - no disk". Once I have that then I get the Message of the Exception processing, as shown above.

  How can I solve the problem?

  Hello

  1 have had any changes made on the computer before the show?

  2. have you used any USB (Universal Serial Bus) device on the computer recently?

  I suggest you to see link for a possible solution and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-no-disk-exception-processing-message/b1a67525-d5e8-46AE-9801-6b169547e656

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Start the problem - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Boot PC I started getting the error message next - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c - anyone know how to get rid of this?

  Murray

  http://www.Symantec.com/business/support/index?page=content&ID=TECH144464