Window Vista Home Basic__Configuring updates: stage 3 of 3 0% complete - do not turn off your computer.

Similar Questions

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Try to update, but that out of failure configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  my laptop is s200e asus PC with the built in language unique window 8.

  My problem is when I wan upgrade to 8.1 of the shop window, it say I need to update the update of the window.

  but the problem occurs when I updated, and then "failure of Windows updates. Restoration of the changes. Do not turn off your computer. »

  but the return is seem endless, coz I wait for a whole day... .but it will be not just finish.

  I can do nothing but reset it back to the factory.

  I can't update 8.1 store window without updating the window.

  You do not add features to upgrade 8 > 8.1

  That's the Pro and Media Center that do not need another product key and that are no longer available.

  And the creation of media for 8.1 works; I just checked it a minute ago.

  See you soon.

• New notebook ASUS Windows 8 by displaying "features of Windows Setup that are 100% complete do not turn off your computer.

  Since the purchase of my new laptop ASUS Windows 8, it took nearly 10 hours to install the 42 "Windows updates", and 22 "Apps updated and running a restart where"configuration Windows 100% full features do not turn off your computer"sitting on my screen for 40 minutes." I can't believe this is the technology of 2013. I'm afraid how long it will take to install Office - can I take the computer back to the seller?

  Hi Duncan,.

   
  I imagine the inconvenience that you are experiencing.
   
  Method 1:
  Start the computer and follow these steps to restore health:

  a. press the Windows key + X.
  b. open Prompt (Admin) command.

  c. type dism.exe / online/cleanup-image /restorehealth and press ENTER.
   
  Method 2:
  I suggest to refer to the section my computer crashes or freezes when it installs the updates and run the fixit the link:
  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286#top

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Method 3:
  Check out the link and follow the steps in the article:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  Note: It is strongly recommended that you back up all your personal files.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• What should I do when Windows Update is blocked for 3 days, saying "do not turn off your computer.

  Windows Vista Home, automatic installation of updates 3 days ago, when it froze. He said 'do not turn off your computer', but ctrl + alt + delete does not work, so what do I do? I can't use all the controls while the update is frozen. If it's a difference, it is stuck on that updated 3/3 to 66%. Thanks in advance.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/computer-freeze-during-Windows-7-update/8968dba7-1e08-4594-bd49-3559d49c6cfe

  08/13 / 1115:29: 13:00 HTC

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Configuring updates: stage 3 of 3: 0% Complete do not turn off computer

  For 3 days, the laptop's display screen above to turn off.  How to break this vicious circle?

  Hello

  When you try to install updates from Windows Update on a computer that is running Windows Vista or Windows 7, you may receive the following message is displayed:

  Configuring updates step 3 of 3. 0% complete

  After you receive this message, the computer restarts, and then you receive the same message again. Windows will not start and the computer continues to restart and display the same message. The update is not installed successfully.

  Method 1: Start Windows with installing Windows disk and then use the repair feature

  Starting up Windows:

  1. Insert the Windows Vista installation disc in the drive and restart the computer.

  2. When you are prompted to start from the disc, press any key.

  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

  4. on the next page, click on repair your computer.

  Select a restore point:

  1. on the System Recovery Options page, click the version of the Windows operating system you want to repair, and then click Next.

  2. on the System Recovery Options page, click System Restore.

  3. on the System Restore page, click Next.

  4. Select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you experienced the problem described in the Symptoms"" section. To select a date, use her choose a restore different option and click Next.

  5. If you are prompted to choose which disk to restore, select the hard disk on which the operating system is installed, and then click Next.

  6. on the confirm your restore point page, click Finish.

  7. when the restore process is finished, click on restart.

  Note: To avoid this problem in the future, see the steps in the "More information" section to manually install the update for Windows.

  Note: For more information about how to use the system recovery options, see the Microsoft Web site at the following address:

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  For more troubleshooting steps and for more information about the problem you are having you can refer the article below.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Let us know if this helps

  Concerning
  Anthony.

• Takes 5 minutes - start Message: Configuring Windows Update 0% complete do not turn off your computer. Windows 7 Professional 64-bit system, works fine, but I get this stupid message whenever I start.

  How can I get rid of this stupid message and have a normal boot.  This took place yesterday, and it's a real pain.  How can I get rid of this.

  I had this problem 2 days in a row. Windows 7 Edition Home Premium. "Automatic updates" not ended and I got the same message on restart and had to wait for it to timeout.

  I tried "manually" update, and that fixed the problem.

  Go to the control panel. Click on system and security. Click on Windows Update and follow the instructions. I selected the updates recommended, installed and rebooted. Problem solved.

  (I have no idea why this problem occurred. In the "Windows Update", I opened the "update history" and saw the 'Impossible' updates, but I don't dig deeper than that.)

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Configuration of updates 3 of 3-0% complete do not turn on your computer

  On start up there is a black screen with 2/15326 (_0000000000000000.cdf - ms) showing before it continues its cycle of configuration updates 3 of 3-0% complete do not turn off your computer

  Hello

  Maybe it's because you the CD/DVD-ROM are not set as first Boot priority in the BIOS.

  Visit this link to find out which key press to boot in the BIOS according to the manufacturer of your system:
  http://www.inventio.co.UK/getbios.htm

  Visit this link on how to change the boot order:
  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange_2.htm

  Make sure the CD/DVD-ROM is set as the first boot priority.

  Then try to boot from the Windows DVD.

  All the best!

• "Configuring updates: stage 3 of 3-0% complete.". Do not turn off your computer. "Todays automatically. Update on a Vista 64-bit machine

  The message "configuration updates: stage 3 of 3-0% complete.".  Do not turn off your computer. ' is on my screen for more than 2 hours.  OS 64 bit Vista with automatic updates on the value.  What should I do?

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.