Windows 10 and Sierra Wireless MC8355

I've updated a Lenovo X131e of Windows 7 pro for Windows 10 pro in July. I recently made a trip and use a wireless connection. Everything was OK. On 20 August, I noticed that a driver updated for the Sierra Wireless MC8355 has been detected when I ran the lenovo thinkvantage software update. I installed it and since then my Sierra Wireless MC8355 no longer works. During research, I noticed that a pro 64-bit of Windows 10 driver is no longer offered by Lenovo. The 8.1 Win and Win 7 drivers say that they no longer work with Windows 10.

Lenovo has just published a driverfor Windows 10 Sierra Wireless MC8355.

Tags: Lenovo Products

Similar Questions

  • Re: Equium L40 - Windows 7 and the wireless switch

    I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

    Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

    When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

    I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

    Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

    See you soon,.

    Ray D

    > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
    What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

  • the mouse is stuck, windows xp and mouse wireless

    I have Windows XP and Microsoft Wireless Mobile Mouse 3000. Since a month or longer the mouse crashes constantly and is gradually worse and worse. Disconnecting and reconnecting the USB works sometimes, usually makes no difference. Same trick with opening and closing the battery cover, usually unstucks it temp but will immediately stuck again every few seconds or minutes.  Its become rather serious. It's like a stutter of conflict not pilot a stuck permanent, it comes and goes every few seconds. Any suggestions?

    Hi Nancy,.

    You can read the following article.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

  • WIFI disabled on windows vista and cannot wireless connect to the net

    WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

    All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

    In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

    Is there a way to FIX?

    http://support.Microsoft.com/kb/932520

    Read the above re ignore this error message.

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

    I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

    I tried:

    Atheros Wireless LAN Driver 2011

    I saw someone talking about DriveTheLife in another forum and decided to try it.

    IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

  • How to validate windows XP and get wireless to work on compaq mini 110 c-1001nr?

    My father (86) crashed his compaq mini and it was all blue screen, so I tried to use this recovery software to restore the factory settings, but nothing has worked. a friend suggested from scratch, so to format hard drive and reinstalled windows Xp for him. He worked for a month and now ask you the key product, but when we enter the key at the bottom of the computer it says invalid.

    I tried HP support, but I need to connect to the internet to download anything and the wireless is not working.what can I do now?

    When I start it up it says windows xp starts and says "the copy of Windows must be activated before you can connect" then we are stuck in the entrance of your product keys page. I click on phone, given that my key does not work and called the number he says and will not let me reset it.

    Give Microsoft activation will not take the "reset" answer, youre activation, do not reset.

    That # is 8885712048

    In addition, change "internet connection" in the Control Panel, locate the properties of the material change

    In addition, change 'internet options '.

    In addition, youre pc hardware software/drivers (if based on intel) intel.com will have the necessary downloads,.

    Search/drivers/software support, look for the update utility

  • Installed the updates, but the display looks like windows 98 and the Wireless does not work

    Hello
    I use a laptop with vista service pack 2 and I tried to update windows via windows update on the recommendation of the support page from microsoft on how to unload a debugger. There are only three optional updates available, I forgot what they are and after restarting the computer the theme looked like windows 98 and my without wire might work, and also, I was still having problems with the game with the question of the debugger.

    What should I do?

    (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves. The 'remains' of McAfee may be cause of your problem.

    1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 test cycle.

    NB: If the application pre-installed McAfee subscription or free trial period has expired before you install Threatfire, the latter may not have installed correctly and can not work correctly since you installed it.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Office Windows 7 and XP wireless networking

    Hello.  last weekend (9/1), I installed a new router from Linksys.  Currently, I am wireless with good access to the Internet and my Canon printer.  My new Dell desktop running Windows 7.  It is directly connected to the router.  I have excellent connections to the Internet and the printer (also connected).   The Windows desktop can see everything on my XP laptop.  I don't see anything on the desktop.

    BILL and BEVERLY-PC (XP and W7, names respectively) are in the MSHOME workgroup

    The machine Windows 7 says it can see my laptop (BILL), but is not part of the network 3.

    Looking at my network places, I can see MSHOME.  By clicking on it, it errors saying MSHome is not accessible...

    I tried to use the Network Setup Wizard, but the USB networksetup drive file doesn't have to provide settings for Windows 7.

    Phew.  That's all.  How to fill out my network so that I can access files on the Windows 7 computer.

    Thank you in advance for your time and effort.

    I have installed MS Security Essentials and had it work.  Then I removed the McAfee.  I verified that the Windows Firewall is on.  I checked my XP machine and voila!   I can see the Windows 7 desktop.   Thank you very much.   Hope you are enjoying your help – it is a great help.  Bill

  • Windows 7 and Microsoft Wireless natural Multimedia keyboard

    I have a Dell Studio XPS 435 t 64-bit computer using Windows 7 Home Premium.  I recently joined my natural Microsoft Wireless Multimedia keyboard with the usb key.  The keyboard works fine, except for the three buttons at the top left (My Documents, my pictures, and my music).  The close session button also does not work.  When I press on them, nothing happens.  On my old computer using Windows XP Multimedia, top left buttons open the corresponding files.

    I have two questions.  First of all, is there anything I can do to get these four buttons to work once more?  And secondly, is there a way to reallocate what happens when I press the buttons?

    Thank you in advance for your help!

    Aaron to Chicago

    Hi Aaron,

    When the issue occurred?

    I suggest that you follow all of the methods mentioned in the below article (Wherever applicable) and check if the problem persists.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • running windows 7 and trying wireless printing HP deskjet 3512

    I recently bought the HP Deskjet 3512 wireless printer and it will print as long as I put it in place through the USB cord. I am running Windows 7 on my Toshiba Satellite C655 laptop. Everything is implemented in accordance with the directions of the Conference on disarmament, but not acknowledge anything once he tells me to unplug the USB cord.

    Hello

    Thanks for asking this question to Microsoft Community.

    It has to be boring. I'll help you understand a fix for the problem. However, I need to ask you a few questions before proceeding.

    1. Once you get the prompt to disconnect the USB cord?

    2 did you have any software or changes to the material on the computer before this problem?

    I suggest you try these methods to work on the issue.

    Method 1:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2:

    Step 1:

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Step 2:

    Reference:

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • Windows 8 and hp wireless printer

    Windows 8 will not send any documents in the series hp wireless printer photosmart d110. tests show than a wireless connection. pilot tests say assistance up to date drivers. used always print office documents or troubleshoot tests. It seems that there is a connection between an hp printer control application in the app menu. This shows as a web-based printer. Windows has updated a couple of times and did not reverse the update then. printer is checked as the default printer. someone at - it ideals. Thanks in advance.

    Hi Richard,

    1. do you get an error message?
    2. all other wireless devices work properly?

    The problem could be due to certain parameters of the printer or the computer. I suggest you to try all the steps from the following link and see if that helps.

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Post us the results after trying the steps above.

  • ThinkPad T43 2686 DHU with windows 7 and no wireless

    Where can I get drivers for my laptop T43 2686 DHU for windows 7? IM also missing audio of those as well and the support of driver finder does not for windows 7. Ive searched the forums and is not much information on it, even though some have had to operate.

    Thank you

    Welcome to the community.

    your best bet is likely to be trying vista drivers when you can't find win7-specific versions. I presume you've seen the matrix of pilot t43 here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT035703 ?

    There are a few choices for wlan Vista, but unfortunately no list drivers audio.

    HTH a little.

  • How to set up a wireless connection between my computer windows 7 and my printer?

    Laptop running windows 7 and HP wireless printer.

    What printer wireless HP do you have?

    Is the printer connected to your wireless network and online?

    If so I just used the software provided from HP who asked me if I wanted to connect to a USB port or wireless router. I choose the option Wireless for my HP J4680 AiO device and the software installed the driver appropriate printer and other associated software, IE. Center solutions HP, etc and I could use my wireless printer.

    Click here to download manuals updated, how - to, of, software, drivers, etc for your machine.

    http://welcome.HP.com/country/us/en/welcome-copy.html#support

    If your printer is not connected to your network, you may need to set up a temporary ad hoc wireless between the printer and a PC. Once you do this, you can enter the printer wireless configuration pages and configure the SSID of the network, wireless, encryption type, encryption key, etc.. Also, FWIW, I have set my HP machine with a static IP address to make it easier for me to access any pages of any PC on my network config.

  • I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

    could not access vb run time for custom action script

    I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

    Hello

    I suggest you run the fixit and see if it helps:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Also check out this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

    It will be useful.

  • Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

    I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

    Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

    I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

    With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

    I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

Maybe you are looking for