Windows 10 can not boot after installing the Bootcamp drivers

Similar Questions

• I can't boot after installing the latest win xp updated system - missing or damaged/system32 hal.dll

  I have win xp and that you have installed the latest updates 7 system - now I can't start.

  I get the message:

  Windows didn't start because what follows is missing or corrupted /system32/hal.dll

  I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all.

  Help me please, thanks

  XP trying to tell you that it cannot find the file.  It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it).

  You should not have the Windows XP installation CD for this problem.

  It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish.

  What would you do if YOU were the manufacturer?  Communicate with yourself?

  The instructions in this link to replace the hal.dll file are bad, bad, bad.  If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file.  There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine.  Clearly, the technical support engineers have never actually solved this problem.

  Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here).

  You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged.  Then see if you can start after that (maybe it won't).

  THEN, you must use the Recovery Console to rebuild your boot.ini file.  I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article).

  I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot.
  AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here's how to make a CD of bootable XP Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here:
  http://support.Microsoft.com/kb/330184

• 10 Windows crashes after installing the BootCamp drivers

  I have an iMac (end of 2013). I want to install Windows using Boot Camp 10.

  Windows Setup runs smoothly and without errors. Problems begin when I start to install the software of BC. First problem is installing, it stops at the Realtek audio drivers and does not continue. I followed the following steps: boot camp installation hangs at realtek audio stepSearch or ask a question and it worked. Until I rebooted the computer. After installation, Windows does not start and displays either a screen with the sad face or runs the Startup Repair. Startup Repair is unable to do anything, only the Windows reset, it works.

  One last thing. I have a Samsung 850 Evo Pro custom-replaced drive. Some time ago I installed Windows on it normally and it worked until I made a few changes to the partitions on the disk. Strangely, without changing the size of partition, Bootcamp, Windows crashed in itself.

  What can I do now? Windows can operate normally without driver from Apple? I understand some features will be limited, but as I noticed it works well without driver BC.

  You have a Fusion drive? Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  If you have a Fusion drive, please add

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Windows is config not download and install the drivers on windows 7

  Original title: USING WINDOWS UPDATE

  Windows is config not download and install the drivers on windows 7 please help.

  [Tip] Customize the Installation of the driver software from Windows Update device

  hope that helps.

• I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  Hi drdrum,

  Greetings!

  Update the software of camera raw as Canon 5DSR is supported camera raw version 9.0 and above.

  Here is the download link: https://helpx.adobe.com/x-productkb/multi/update-error-u43m1d204.html

  Also, here is the list that displays the camera with respective camera raw support:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Concerning

  Jitendra

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Windows Update will not find or install the updates

  I turned on my laptop last night after several months of inactivity, and when I ran Windows Update I met an interesting problem. Windows Update took a long time to look so I decided to let it run all night. When I checked on this subject in the morning, Windows Update has been always looking, but I had already received a notification in the taskbar informing me that there are updates available.

  I could not cancel the search, so I restarted my laptop, and when I logged Windows again, I saw the list of the updates that are available even if the "last check for updates" was always showing "22/05/2016 at 22:46. I selected all important updates and tried to download and install them, but after several hours, the status was still stuck at 0%. I canceled the installation and noticed that the update of Silverlight has been downloaded and ready to be installed. I tried to update only one without success and was finally able to get it by allowing Windows Installer updates immediately before the power off of the laptop. When I turned my phone back and connected, I could do the same for an update of the framework.

  So far, those who have been the only two updates to cross, and I could not download or install the rest. An additional problem is that my Windows Update always displays a prompt stating "Windows 10 upgrade booked" despite the deadline passing on the free update. When I see the confirmation, I get a popup Windows 10 stating that the offer has ended. I don't know if this is related to why Windows Update does not work, but I saw more guests for 10 Windows on my main computer once the delay.

  Other things I've tried are to update manually the time at the time of Microsoft servers and try to download and install the updates one at a time, but neither contributed to the situation. In addition, Microsoft Security Essentials apparently downloaded and installed the latest definition files on its own, so it would seem that the problem is only related to Windows Update.

  I've attached screenshots of my Windows Update history and update. Any help would be appreciated.

  

  Windows 7 update problems? First read this.

  :)

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Brightness can be controlled after installing the update of November 10 for VN7 - 571 G-71KY windows

  Hello

  I am not able to control the brightness of the display using the function keys after Windows November 10 major updated. The screen always at 100% brightness. And there is no brightness setting in the power management options.

  Found itt! In the case where someone has this problem here is the solution that helped me.

  • go to DAge manager
  • Search for monitors
  • Expand it and if it shows that Generic PnP monitor and then change it back to Generic PnP monitor by right click-> >
  • Click on Update Driver Software
  • Click Browse my computer for driver software
  • Click on let me pick from a list of drivers on my computer
  • then select Generic PnP monitor in the list of templates
  • Click next
  • And the view setting is activated whenever they use to be. 

• Y430A can not boot after memory upgrade

  OS: VISTA HOME PREMIUM 32-BIT
  CPU: P7350
  MEMORY: HYNIX DDR2 667 2GB

  I added a 2 GB Kingston ram on the connector 2

  First of all, it can be the start and connect to windows,

  but after a while, the system of suspension or the SCREEN BLUE DEAD shows,
  He cannot even get into the bios screen when I reboot it

  but it can be boot up if I remove and reconnect the memory

  Sometimes the machine can be restarted and works correctly, except if once I turn it off

  I tried to exchange the slot 1 and 2 with 2 x 2 GB,

  and also replace with 2 x 256 MB Hynix memory.

  but it does not work.

  The new memory is not faulty or is not compatible because it works very well if it autonomous.

  In short, if I install 2 x 2 GB memory, the system may start only once.

  Is it the BIOS problem or it's my mistake?

  Please help and sorry for my bad English.

  Thanks in advance.

  This is perhaps due to the incompatibility of the modules of RAM, working together. If Yes, than to change only the modules will help.

  Also looks like Y510 behavior when it was a fresh model - Y510 all were not able to manage two RAM modules. Update the BIOS helped. For now no new BIOS for Y530/Y430, so will have to wait.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows 7 is not genuine after canceling the process of upgrading Windows 10

  Original title: 10 dirty Tower windows.

  Without my consent, windows 10 has interrupted a program I watched and installed itself. He left no turn of my laptop. After installation and upgrade one came the message asking to accept or refuse. I clicked on the decline. The TI reinstalled windows 7. However, at the bottom of the screen, a message appeared.

  "windows 7 build 7601 this windows 7 is not genuine ' why are they playing Weirdos?  Windows 7 Home premium comes with my computer. Now how can I get the real Windows 7

  Hi Linda,.

  Thanks for posting your query in Microsoft Community.

  • Have you tried the suggestions provided by Greg earlier?

  If you haven't tried the suggestions provided by Greg earlier, do so and explain the matter to the representative. Also, you can view the following thread below link and view suggestions issued by Andre Da Costa.

  Windows 7 Build 7601 this copy of windows is not genuine

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows 7 can not restart after restart

  Hello, I have a problem with my Windows 7 Pro 64 x. Lately, after that I restarted my computer with start/restart, it cannot restart - black screen before the motherboard logo. If I manually, restart with restart button, it works. My system restore was performed after the problem appeared so I can't do a system restore. I can't boot mode safe because the F8 key does not work. I tried bootrec.exe, but nothing happened. What can I do?

  Thank you!

  Yes, I had to reinstall my OS and now it works. Thank you!

• Can not uninstall or install the photosmart software 6510

  After having been frustrated that the printer driver for my new 6510 than anything a printer would claim that the printer was not connected to the network, when at the same time of the same system that the browser he could speak without difficulty, I decided to see if the installation of the last load to the bottom of the software could solve the problem.

  I am running Windows XP and downloaded the software PS6510_1315 verision.  After a first installation failure, (ago I was probably dumb and do not uninstall first) it is impossible to install.  The error message was "Installation failed."  After leaving the look of software for a solution to the problem that I have received a failure of Installation of HP - scrip MSI_1603 which was meant to help solve the problem.  Followed these instructions requiring a reboot to stop some of the initialization of the pilot to restart, and it has not yet installed.

  Then I say that da - uninstall.  I have tryied that using the provided HP unstall link from the menu drop-down HP 6510 Phostosmart and who fails to uninstall, I tried the remove from the Add/Remove control panel screen.  Trucks to uninstall only says in 8 seconds, the green line goes all the way to the end, and then it says done in 5 seconds and starts to decline.  And provides the detailed message that the installation has failed.  And if I find myself a solution sent me another copy of the file "HP installation failure - MSI_1603.

  So I am now completely jambed upward and cannot uninstall the existing software or install the newest software.

  Are there log files that exist somewhere on the system that tells exactly what is happening or why unistall fails.  Maybe all the details have been sent to HP through to find a feature of the solution, but course is not to tell me anything.

  Are there tools that I can use to force an uninstall?

  I really want to beable to use the printer again, but from now I can't use it for anything from this computer.

  HA you are right.  It's always a good idea to be kind to the it guy at work.  I am pleased that you print again and thank you to update me.  I have some suggestions for you.

  1. You can set a static ip address of the embedded Web server (EWS), which is access by browser using the printer ip address you mentioned earlier.  Open the network tab and in virtue of the Wireless section, open IPv4, modify the Manual IP address IP Configuration .  Once you select Manual IP, a button will light indicating "suggest a manual IP address.  Click on it and will populate the fields above him.  Usually the last node to Manual IP address changes.  I would like to return to the current IP address.  Then select apply.  This will help you keep a better connection to the printer and the router will not change the IP address as she normally does.
  2. If your printer is plugged into a surge protector, I recommend that connect you it directly to a wall jack for power.  Sometimes when it is plugged into a surge protector, the printer does not receive the exact amount of electricity and this can cause problems with wireless connection.  The printer has built in a surge protector.
  3. If you decide to connect the usb from the printer, there will not be a problem with another computer, being able to print wireless.  The best way to add a usb printer is to click on the Start button, click all programs, scroll down to the HP folder, open, open your printer and you should see "printer setup"or 'Add a device'.»  Click on that and follow the instructions for installation of the usb.  Do not forget and do not connect the usb cable until the installation program asks that you plug.

  I hope it's useful.