Windows 10 does not work on my PC, and Windows 7 would not be updated

Similar Questions

• Windows 7 update does not find updates

  Whenever I try to update my computer manually, Windows 7 does not detect updates and will sit with the green bar goes all day. He began to do this maybe 3 months ago and I don't have time to focus on the issue so far. I am interested to get SP1, but I can't because the computer will not be updated. Thank you.

  "Windows resource protection could not start the repair service."

  Follow these steps to reset the startup type of the service.

  1. Click Start, type Services.msc

  2. double-click on the Installer of Modules of Windows

  3. set its startup type to Manual

  4. click on OK.

  Try the System File Checker

  `~`

  The TrustedInstaller service has full access to the files of the Protection of the resource Windows (WRP) and registry keys, and these services must be running in order to restore missing or corrupted WRP resources. The TrustedInstaller service starts on request when you run the System File Checker.

  `~`

  03/13 / 1108:23: 48 pm

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  In fact, I went to:

  www.Adobe.com/appsmanager/index.html

  and uploaded CC Desktop App from there.  Worked fine, thanks.

  Dennis

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Satellite L30 Windows XP does not download updates

  I formatted my old laptop Equium L30 to factory settings (XP Home) with supplied Toshiba recovery cd. After this, my internet connection does not work correctly.

  I can browse normally (Explorer, Chrome), but the computer is not download the updates of Windows or other updates, updates to the antivirus for example program.

  I've also updated the LAN and WLAN drivers of Toshiba and the site of the manufacturer (Atheros and Realtek).
  Also, I've manually updated Windows SP3 as BIOS (extract from the Toshiba site).

  When I look at the State of both WLAN and LAN connection, the only 'package' that moves is when I browse the internet with the browser.

  Then, help is needed, thank you! :)

  Are you able to update the Windows system using Microsoft Update page: http://windowsupdate.microsoft.com/

• Does not install updates to Windows (office)

  installing not my updates to the window. It's a Word from microsoft, excel, powerpoint, and ect... I tried everything and nothing works.

  Hello Ccrandall22,

  Thank you for your message.

  We will try to install the updates manually:

  Go to the website from Microsoft downloads.  Enter the duration of the update (KBxxxxxx) in the search box and press ENTER. Click the link for the specific update, and then click the download button. You will get the option to run or save the download, Save to your PC.  Once the download has completed, you will get a run option, open the folder or close. Make sure that all other applications are closed and select the run option.  (If you close this window or need to try again to install, just go to the location of the file has been saved, and double-click the file.) This will start the process of installing again.)

  If the installation manual does not succeed the first time, try to disable UAC, then try the installation again. Click HERE to find out how to disable UAC.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Windows Vista (32-bit) does not always update

  I saw the many threads on this topic; many recommend that you manually download updates, but none give instructions on how to download manually.

  If I try to download something from Microsoft Websites, I get an error saying that the I do not have a program that will open the download and does not suggest which will download programs or install updates.

  Is there anyone who knows the same question.  I'm at the point where I'm done.  I spent too many unproductive hours on it, and Microsoft does not seem to care enough to post a fix.

  Any help would be appreciated!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Shared folder, Windows 7 does not automatically update the files as they are deleted or modified.

  original title: data network of Windows 7 problem

  My problem is with all the means to modify data on my network with windows 7.

  The problem is the following:

  * 4 xp pc

  * 2 win7 (1 pro x 32 & 1 x 64 pro)

  * 1 pc xp with my files in a shared folder.

  all on the same network.

  all PCs can access the folder of sparkle. I have traced the folder on the xp pc 4 and 2 win7 pro pc without problems.

  Now, if I delete one of the files on the xp pc, or with one of the other networked xp pc, I can see the file disappeared on all xp pc and or if I make changes on my file as an excel file, I can see the changes on all xp pc.

  Now if I delete or make changes on my files with my pc xp, my pc win 7 does not show that I deleted files or changed anything.

  still, it shows the deleted files and can even open with all the deleted data still intact.

  I deleted the drive on the pc win 7 and consulted mapping data by accessing the location on the network and still have the same problem.

  It's like winning 7 pads files or something.

  Offline files is not enabled, or synchronized.

  I hope someone can help me.

  This problem has occurred to some of my PC too, after trying all the solutions non-utile so-called, ms professional here is how I solved it, click on the menu of the sar, right-click on Documents, remove all library locations, tried and it has not always worked, restored the locations by DEFAULT, it still didn't WORK , has ADDED ONE MORE, now, everything worked well, after this step i took just the location I had added (not by default) and it still works very well.

  This error has nothing to do with third-party software, but it has everything to do with the "libraries" functionality", the reason for this statement is because if I go to computer\c\users\myuser\my documents\
  everything works fine, but if I go to the start menu--> documents (which uses the library feature), then it has failed.
  Just so removing and adding a few ocntent library solved the problem.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Fullsceen Slideshow works does not after update (2015.2)

  Hi-

  Since the upgrade to the latest version, I note that the slideshow widget full screen does not work. He works within the Muse app (although that it crashed Muse sometimes when using), and although it will display with the built-in preview of Muse, as soon as you try to make an overview of the slideshow browser does not at all, it's all white.

  To make sure that it wasn't a problem in conflict elsewhere on my site, I tried to create a new site of the Muse and the only thing that I add to the page is a slideshow full screen and leave all the default settings (photo galleries and everything) and still nothing loads at all except for the next/previous/counter options.

  Hi BLSMagazine,

  As I suggested above, have you tried to view your site on another browser?

  Kind regards

  Ankush

• Why an update (if uninstall you) does not display updates option in windows 7?

  If it does not disappear, can remove you it manually? If you can, then how?

  OK then, thanks for the info. Robear