Windows 10 General issues for a user of Windows XP

Similar Questions

• General issues for the backup servers.

  So, I'm new in the world of VMware and have a few questions about having a configuration of spare warm in case something breaks down.

  There are two main things I want to know...

  1.

  We have a Vmware box currently implemented with 2 VM on it (I did not)

  upward). We would like to have a server of spare ready in case where that crashes,

  but without spending too much money. Wouldn't be better to set up ESXi

  on the wheel of relief and, in case of failure, use the images on hand

  to bring them up, temporarily, or to have a server spare and just

  take the disks on the server down and drop them

  replacement part (assuming it wasn't a disk failure). Or the other of these works would be?

  2.

  Is it possible to take snapshots of machine non - VM and use then

  images in VMware to save in a virtual environment until the

  physical server is repaired? Just curious.

  Advice or tips would be greatly appreciated.

  1.

  We have a Vmware box currently implemented with 2 VM on it (I did not)

  upward). We would like to have a server of spare ready in case where that crashes,

  but without spending too much money. Wouldn't be better to set up ESXi

  on the wheel of relief and, in case of failure, use the images on hand

  to bring them up, temporarily, or to have a server spare and just

  take the disks on the server down and drop them

  replacement part (assuming it wasn't a disk failure). Or the other of these works would be?

  Your best bet would be to have to install ESXi on the other server and images of current virtual machines to run on your existing server that are taken periodically. I guess that the tone of the email, that you do not have an overabundance of funds to work with, before storage, shared clustered and snapshot based backups would be off.

  If you rely on the possibility of recovering virtual machines among readers on the existing system, you may be in for a surprise.

  2.

  Is it possible to take snapshots of machine non - VM and use then

  images in VMware to save in a virtual environment until the

  physical server is repaired? Just curious.

  Answer brief No..

  Long answer, you can do one or two things that may not work. You can sometimes ghost physical systems and then you may be able to restore the system as a virtual machine image ghost. You might be able to restore a backup image to a virtual machine, and then fix it to a working state.

  There are a number of options available and I'm sure that some other people will be piling on short time

• Terminal Windows 2008R2, 17.01 Firefox server hangs after startup for all users

  We have 2 servers RDP with Windows Server 2008R2, we recently updated firefox since version 9 version 17.01 because of flash plugin crashes. After that the firefox update blocks very regular for each user.

  After you open a site, we see it for a fraction of a second, then
  The error message depending on whether we get:
  "Firefox has stopped working".

  This is the case for most sites, some sites work however, as www.google.nl
  Sites that do not work for example:
  www.YouTube.com
  www.nu.nl
  www.UNOX.nl

  I thought it would be flash again.
  What we tried:
  -Firefox to uninstall and reinstall again.
  -Uninstall Flash player and install it again.
  -Disabled all add-ons
  -tried save mode
  -tried this one: https://support.mozilla.org/en-US/questions/922902?esab=a & as = aaq
  -tried this: https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles?redirectlocale=en-US & redirectslug = Managing profiles #os = win7 & browser = fx17
  -Firefox default factory reset
  -Old version 16.02 (after uninstalling 17.01)

  I'm a little short on options.
  Any help would be much appreciated!

  Kind regards

  Joost

  Luckily a colleague of me figured it out!

  It turns out that the cause of the firefox crashes came from a security layer installed with the ESC Secure Layer that uses an application called Manager of funds
  The dll that the accident was referring is used by this program. Find that out was the hell google is now filled with the nonsense of 'check your PC for malware' stupid on a search for the dll.

  After removing the application, FF works fine again without crashing.
  So it seems a compatibility issue with Firefox and Money Manager

  Thanks for the help and I hope that someone in the future will have something on the solution we have found.

  Cheers!

  Joost

• Updated free Windows 7 for Vista users?

  After a random time, the system stops. No blue screen, but disconnects and stops. Windows Vista Edition Home Premium.
  It is a Dell Inspiron.

  The event viewer displays "c:\windows\system32\winlogon.exe initiated process power off ' I can't get much more than that before it connects itself again

  More precisely

  Source: USER32
  The process C:\Windows\system32\winlogon.exe (computer name) has launched the power off computer (computer name) on behalf of the user (computer name) \(User Name) for the following reason: no title for this reason could be found
  Reason code: 0x500ff
  Stop type: power off

  I thought maybe some sort of virus, but I deleted the partition, re-created, formatted, it twice and reinstalled vista.  Same thing is happening. Have searched online to find answers, see a lot of people with this issue, but have not seen one resolution, other than the downgrade to XP because it only seems to happen with XP.

  Anyone has any ideas where I should post this, or where to start to a solution?

  Someone told me because of vision problems, I was able to get a free upgrade to Windows 7. Someone knows something about it?

  Picton1,

  There is no free upgrade to Windows 7 for Vista users unless otherwise stated by the manufacturer of your system.

  Contact you the manufacturer of the system for more information.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows parental control can be used for domain users?

  Original title: parental control Windows and users in the domain?

  Windows parental control can be used for domain users?

  Hi VMilana,

  The issue of Windows 7 you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows 7 forum for assistance.

  Hope the helps of information.

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• Disable Control Panel for all users in Windows Xp

  Hi, I use windows XP Professional, I tried to disable the control via "gpedit.msc" Panel but it is always open to guests account n other account... Is it possible to disable the "Control Panel" / workstation and anything else that the case may be for all user accounts? How can I set privileges for any user / account of comments...

  Van ' t disable you my computer because that's where all the CD USB and all that jazz. You can restrict access to drive Local (c) but I'll have to check with a couple of my tech people to discover the steps on how to.

• Is there a manual for the user of Windows XP and how can I get a?

  Is there a manual for the user of Windows XP and how can I get a?

  Hello

  See how you go with this...

  http://download.Microsoft.com/download/1/6/6/16674679-1e6e-4304-A5A0-49eeaa31e639/RevGuide.PDF

  Concerning

  GT4U

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• Windows Messaging keeps asking for a user name and password. What should I do?

  Windows Mail keeps asking for a user name and password.  I know that the username and password are good because I can access mail via the web.  I have two e-mail accounts.  Saturday, I installed 23 updates of windows.  Now today, I can't get into windows mail.  Why?

  Error message:

  Account: 'first name', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Account: 'username', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Hello

  I am happy that it works.

  It is perhaps that this has nothing to do with your system, but a 'problem' in the e-mail server of the provider.

• Disk Cleanup for Vista reports 12.6 GB for "per user queued windows error reporting"

  original title: clen-up disk

  My Cleanup utility disk Vista reports 12.6 GB for "per user queued windows error reporting". Is it safe to delete this item? Is that why my laptop is slow today and still freezes?

  Yes, but isn't concert read this this type of error: http://www.vistax64.com/tutorials/175654-disk-cleanup-windows-error-reporting-bug-fix.html

• The upgrade to windows 7 will be available for vista users?

  The upgrade to windows 7 will be available for vista users? If it's free what you will that the family premium, pro or ultimate?

  Depending on your edition of vista, there are pre-order options that are very good: http://www.microsoft.com/windows/buy/offers/pre-order.aspx
  Win7 Home premium to win 7 Professional for 99.99 and 49.99

  Cheers.

  * If you think that your question has been answered usefully, please check the response as the response, while others may find it.
  * If you are assisted by a response to another Member of q-n-a, please vote for the thread as helpful.

• automatic locking in windows 7 for administrator users

  How can I turn off the option to disable the automatic locking in windows 7 for administrator users

  How can I turn off the option to disable the automatic locking in windows 7 for administrator users

  Set a group policy... (only if your version of windows 7 Professional or enterprise or ultimate edition)

  http://www.ehow.com/how_8107523_do-lock-PC-after-minutes.html

• How to duplicate the screen of Windows 8 start for multiple users

  I will implement separate user profiles for the grandkids on my PC of Windows 8 and want to start them all out with the same applications and settings.  I can do it all manually, but I would like to create one, and then copy the settings for others.  I know how to do this in previous versions, but so far have not seen splash screen settings at the usual place.

  Hi CraigLawrence,

  Thank you for choosing Windows 8 and join us on our community.

  Looks like you want to have the same start parameters of the screen for the user accounts. We will be happy to help you.

  You will be able to change the parameters of start screen under security settings for the family.

  I suggest you to follow these steps and check.

  a. press the Windows key + X , and then select Control Panel.

  b. Select the user accounts and family safety.

  c. Select family security and click on a user account.

  d. click on The Application of Restrictions and select the user will use the apps I leave.

  e. check the boxes for the apps you want to allow the user, and then click ok.

  Reference:

  You can go through the links for your reference.

  Set up parental controls

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-8

  Using parental controls with the Windows store

  http://Windows.Microsoft.com/en-us/Windows-8/family-safety-settings-Windows-store

  Keep your family safe

  http://Windows.Microsoft.com/en-us/Windows-8/set-up-kids-accounts#1TC=T1

  Keep your family safe

  http://Windows.Microsoft.com/en-us/Windows-8/family-safety#1TC=T1

  It will be useful. For queries further feel free to come back.