Windows 10 improvement of the memory problem

sort on microsoft windows live chat... Thank you

1. you can delete

2. you can also remove what they will be irrelevant to win 10

3 - while you can use a USB stick to install you will still need the 20 GB free on the partition of the BONE

Basically, your hard drive is too small

You could always clean install and which has the advantage of making your computer faster.

Tags: Windows

Similar Questions

  • LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

    LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

    Check your hosts file.  to help with this and more:

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  • Windows 7 hangs with the hardware problem, possibly video card

    We currently live hourly breaks down our Windows 7 ultimate (64 bit) desktop system.  Whenever Windows 7 restarts, it informs us that Windows 7 crashed because of a "hardware problem/question.
    We spent the last week using Memtest to test each individual memory stick (8 GB total RAM, 4 individual memory 2 GB sticks), as well as each of the individual memory on the motherboard slots.  Tests total were about 24-36 hours (not all at once, of course.)  Memtest found no errors.
    We are therefore now move to the video card.  Anyway is the same way and diagnostic test the video card (something similar to the test of memory)...?
    Sense, is there any software diagnostic tool that can be downloaded — like Memtest - to test its video card...?
    Thanks in advance for answers!
    * original title - card video problem *.

    Hello

    Utilities usually just video card testing their performance and General compatibility with Windows
    and the programs they are running. For the test that deals specifically with crash, BSOD and other
    questions, it would be best to contact the video card manufacturer support and check with their forums.

    Motherboard (and system manufacturers) also have troubleshooting utilities, if they will help you
    to access it.

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    Start - type in the box search-> auditor/Reset hit enter to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    ------------------------------------------------

    Check this thread for J Stuart W response which has some utilities that might help.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/random-black-screen-on-Windows-startup/ac0e0e3d-C6A2-4c35-9a69-81cfc446831f

    ------------------------------------------------

    This, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    These utilities can read the Minidump and another error collection files if you need to see what
    in them there. If this BSOD report see the below troubleshooting tool and report those or other issues
    here for further troubleshooting assistance.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP)

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ============================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 answers.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can help with other errors you might find.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • After upgrading from windows and reboot "diagnose the connection problem" rises and won't let me use windows until the removal of updates

    diagnose the connection problem

    You can try to uninstall the update 974455 that came out last Tuesday, removing it seems to have resolved other

  • Windows 7 ultimate with the update problem/startup problem

    Hello

    I did the following:

    every day my hp Pavilion dv5-1150us has automatically reboot the system, but it does not start unless I run recovery system run.

    Windows Update can not run properly.

    My computer installed vista. then I switch to 7 ultimate.

    I would like to solve this problem. Is there anyone can help me?

    Microsoft Windows [Version 6.1.7601]

    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

    C:\Windows\System32>sfc/scannow

    Start scanning system.  This process will take time.

    Start of the phase of verification of the scanning system.

    Full check of 100%.

    Windows resource protection found corrupt files but was unable to solve some of them.

    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example

    C:\Windows\Logs\CBS\CBS.log

    C:\Windows\System32 >

    Have you looked into the logfile @ C:\Windows\Logs\CBS\CBS.log?  So the scannow to quit smoking, must be completed properly.  If this does not help, try to run a scan of the hard drive by using "chkdsk/r" @ the command prompt.

  • Several pop-up windows "Security Fix" indicating the many problems w/computer & scan to see what they were. returned with several "critical" errors & several "warnings".

    Original title: fix the system

    While the site of the car got several popup windows "Security Fix" indicating several issues w/computer & scan to see what they were.  Do that & came back with several "critical" errors & several "warnings" says had to buy the program to correct.  Then stop computer & when turned on the next morning the only office was trash & start menu is empty with the exception of all programs.  Went to windows defender for all programs & said it was off?  I didn't turn it off & when trying to turn back & says cannot open program, error 0x800106ba.  Help!

    Do you have any antivirus, in addition to Windows Defender?

    System Fix is a fake program aimed at obtaining the payment card information. If you have used your card with it, contact your card provider immediately.

    There are instructions to remove the difficulty here:

    http://www.bleepingcomputer.com/virus-removal/remove-system-fix

    Use only written instructions. Do not download anything from advertising on the Web site.

    This program can damage your computer and the removal instructions may not be completely effective.

  • Equium A60 - error caused by the RAM problem - Windows tool does not work!

    Hi all

    When closing my laptop, I got the blue "screen of death" and it restarts, windows came with this analysis of the accident: "error caused by the memory problem to live: run the Windows tool". I downloaded diagnostic tool (mstinst.exe), he opened so I got "windiag.iso" and he burned on a CD like they told me (the use of 'Record Now') and then I put in the CD drive and rebooted my computer. But it did not launch the tool! Does anyone know why it went wrong and how can I make it work? Even if I got the tool to work, I would be able to solve the problems of RAM anyway, just taking my laptop to a repair center?

    Thanks :)

    Hello

    I put t know if you have seen this page http://oca.microsoft.com/en/windiag.asp but there you can find a detailed explanation of how to use the Windows Memory Diagnostic tool.

    Good luck!

  • Refreshed laptop, can't find Windows 8.1 on the app store?

    Hi all

    I updated my laptop yesterday. When he finished, and I had set up my mobile phone as I wished, I opened the app store to download windows 8.1. The only problem is, he's not here! Help, please.

    http://Windows.Microsoft.com/en-AU/Windows-8/why-can-t-find-update-store

    Why I can't update in the store?

    Although the Windows 8.1 update is downloaded and installed from the store, your Windows PC needs updates, 2871389 KB and KB 2917499, until Windows 8.1 is available in the store.

    or

    As you refresh the laptop, you may also need to update the content in the store.

    See the link above.

  • Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

    Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

    Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

    Beginning physical memory dump

    Total physical memory dump. Contact technical support for further assistance group.

    Hi fernandomventura,

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: Follow the steps mentioned in the articles below which deals with a similar question

     

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

    http://support.Microsoft.com/kb/945658/

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • get the error message"Windows Media Player has encountered a problem while playing the file. "When tying to play videos on my memory card

    get the error message"Windows Media Player has encountered a problem while playing the file. "When you try to play videos on my memory card

    Hello

    1. What is the format of the video file you are trying to play?

    2. do you have any third party audio or video codec installed?

    Follow these methods.

    Method 1:  Run the troubleshooter in the Windows Media Player settings.

    Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

    Open the troubleshooting Windows Media Player settings Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2:
    If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

  • Activate the oracle 10g on windows 2003 R2 X 64 edition to address the memory 8 GB

    We use the Oracle 10 g R2 on Windows 2003 R2 x 64 standard edition. Lately, we have improved the system memory of 4 GB to 8 GB. Windows detects the memory as it is (8 GB), but oracle does not see the RAM 8 GB. How can we ovecome problem.

    Best regards
    Murat CAKIR

    What you actually do is since you're 10gr 2, you can use the spfile. Increase the SGA_MAX_SIZE SGA_TARGET (if you want to give control to the Oracle itself) in the spfile and bounce the database.

    alter system set SGA_MAX_SIZE = 6G scope=spfile;
    alter system set SGA_TARGET = 6G scope=spfile;
    shutdown immediate;
    startup;
    show parameter sga;
    

    6G could be changed depending on what type of applications which allocates RAM for the operating system, you already have on your operating system.

    Hope that helps.

    Ogan

  • Windows 7 directory on the iTunes folder encryption is originally a problem of insufficient authorization

    Windows 7 seems to be encrypting random complete files in my iTunes on my drive folder hard ext.  This causes problem insufficient authorization (see If iTunes repeatedly prompts to authorize your computer - Apple Support).  Any ideas of how to avoid this?  The encryption because the album is to have some sort of time-lock?

    Sounds like a Windows problem, not an iTunes one. Do not encrypt files unless they need. You add an access memory load data within a treatment and run the risk that you cannot recover the data if the operating system crashes into the keys with him. Also not a good idea for an external drive that you might want to use it on several computers. See http://windows.microsoft.com/en-gb/windows/encrypt-decrypt-folder-file#1TC=windo ws-7.

    See fix for iTunes for Windows security permissions for the appropriate permissions to set on the files to iTunes.

    Make sure that the information SC folder mentioned in the document you cite is not subject to encryption either.

    It is perhaps worth noting that iTunes may issue a request to authorize when a download from the store is damaged in any way. Delete the affected file and download a new copy of the store usually solves this problem.

    TT2

  • Satellite L40 - 14F: the Memory Diagnostics tool has problems with my hardware

    Hello!
    I have Toshiba Satellite L40 equipped 14F of Windows Vista.
    I did a memory test using memory diagnostic tool, bulid in Vista, because these last two weeks, I had two times a blue screen.

    Diagnostic tools noted memory problems with my hardware.
    Now what?

    My laptop is new, I bought it on 28.12.2007.

    If you have problems with your hardware then don t waste any time and contact huh ASP in your country for a control.
    If there are a few problems with the equipment the warranty should cover everything.

    Good luck

  • HP 15-D103TX computer laptop problem: Windows does not detect the dedicated graphics card

    Hi all

    I recently bought a laptop HP 15 - D103TX , which is held responsible for Free on BACK. I have updated my Windows 8 operating system and have installed all the drivers from the HP website. The laptop has dedicated 2 GB Nvidia Geforce 820 M graphics card.

    But when I checked, I found that Windows displays the graphic memory dedicated only 0 MB.

    As you can see in the screenshot, it shows as 0MB dedicated graphics memory.

    Anyone can clear me, upward on this subject? Is it a driver problem, or what is Windows 8 going crazy.

    Thank you very much in advance!

    Kind regards

    Brahmnoor

    Okay, I found the solution. In fact, the Haswell Intel i5 processor that my 15 HP D103TX has also comes with an Intel 4600 GPU intregated. So when I do normal tasks, the GPU intregated works, so Windows does not display the NVIDIA GPU 820M, but when I play a game or doing intense graphics work, he switches to the NVIDIA one.

    In fact, it makes sense, because it preserves the battery of the laptop.

    Credit: found this solution on the NVIDIA support forums.

    https://forums.GeForce.com/default/topic/664986/GeForce-700-600-series/dedicated-memory-not-shown-/

  • Receive the error message "the instruction at"0 x 00424590"referenced memory at"0 x 00000004", the memory could not be"written"." Error is received before the Windows logon prompt

    Receive the error referenced memory before you receive the logon prompt Windows session during the boot process.  Have replaced the RAM on the computer.  Windows Xp SP3.

    If anyone can identify the update that they think that may be the cause of the problem, you can navigate to the uninstall folder and determine what files have been updated.  If they can not start (except in the Recovery Console), you can also sort updates the date by using the dir command in the folder c:\windows (all $NtUninstall records).

    Problem is who writes all updates with Patch Tuesday comes around (say... it's today!-be prepared for positions "broken Windows my computer updates" start coming!).

    For example:

    When you install an update, first installation makes a copy of the files he wants to replace in the $ $NtUninstallKBnnnnnn... folder.

    That's why you can uninstall the update later.  Running uninstall the update will sometimes remove the updated files, then copy the original return files.  Sometimes uninstalling copy just the original preupdate on top of the most recent files.  It can also remove some registry keys, so Windows Update do not think you have more (look at the spuninst.inf file).

    Look at this update of security for example (KB950762) that updates c:\windows\system32\drivers\rmcast.sys:

    If you have installed, it will create this folder:

    c:\windows\$NtUninstallKB950762$

    You will have the front update file c:\windows\system32\dllcache\rmcast.sys in this folder since the installation of the update makes a copy of the original file for you.

    Then look at the file spuninst.txt spuninst folder and you will see what will happen if you need to uninstall the update:

    DEL "c:\windows\$hf_mig$\kb950762\sp3qfe\rmcast.sys".
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\dllcache\rmcast.sys '.
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\drivers\rmcast.sys '.
    COPY 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.txt' 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.tag '.

    In this case, uninstalling just copy the original file on top of the files that have been applied in the update, the spunint.inf updates registry tips and that's all.

    Notice that it also replaces the file in the dllcache folder too - c:\windows\system32\drivers\rmcast.sys is one of the 3498 drop that PAM cares everything (it's number 2500 in the list).  In dllcache files are backup files.

    If you were to access your drivers folder and rename c:\windows\system32\drivers\rmcast.sys to rmcast.lem, almost before you can Flash the 'missing' file will be replaced with the copy in the dllcache folder and you will see this in the event log:

    Event type: Information
    Event source: Windows File Protection
    Event category: no
    Event ID: 64002
    Description:
    File replacement was attempted on the protected system file c:\windows\system32\drivers\rmcast.sys. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5598.

    It is WFP in action and this means that WFP is working!

Maybe you are looking for