Windows 10: lightroom does not allow me to work in the module development for more photo or two, and then it crashes!

Similar Questions

• Recently upgraded to Windows 7 to 10. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. I have the Version of Lightroom 6 CD. Is this a compatibility issue?

  Recently upgraded to Windows 7 to 10. I have Lightroom 6 CD Version Dell PC. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. Is this a compatibility issue? How can I solve this problem? Thanks for any help.

  Lightroom preferences, tab performance.

• Computer does not allow me to click on the icons.

  I turn on my computer and connect to a single user and my computer does not allow me to select all the icons, but if I pass users and connect to another user at the same time, I can use my computer. My computer was working fine until I installed Office 365. I called the technical support on the office and they said that it was not the office which was the cause of the problem. Any suggestions?

  Hello

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you can not select or open all the icons in a user account.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what happens when you try to select icons?

  2. do you get an error message?

  Here are a few troubleshooting methods that you can try in order to solve the problem.

   

  Method 1: Try to run fix it from the link below:

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: try to rebuild the icon cache and check.

  a. open the Start Menu and type cmd in the search box and press on enter.

  b. in the command prompt, type each command line below one at a time then press ENTER after each single line.

  CD /d %userprofile%\AppData\Local

  DEL /a IconCache.db

  OUTPUT

  c. log off and log on, or restart the computer to recreate the icon cache.

  Note: This helps rebuild and recreate a new file IconCache.db .

  Method 3: Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Lightroom does not launch or closes automatically after the splash screen

  Lightroom does not launch or closes automatically after the splash screen

  I suggest you to please you by going back to the earlier version of Lightroom once and see if it helps.

  How backwards: Instructions to restore an earlier version of update

• Windows XP security does not allow me access to the browser or the internet

  I'm having a problem with XP Security that keeps popping up almost continuously and prevents me from doing anything , without ordering the software.   It also shows that I have 26 virus, but an another separate scanning with a newly installed anti-virus [Ioio] program stated that 5 and were all deleted/purged.

  I have been using FireFox as my browser and still cannot access Yahoo homepage - impossible to go to the post office or anything else.  Pop up warnings keep coming and display 'Windows XP Security' is still waiting for me to buy their program - and I can not change anything on this menu at all since it keeps redirecting me to the purchase.  I can't get FireFox or even Internet Explorer since it shows a terrible message and does not allow me to circumvent it.

  What can I do to get rid of this problem?  I had to use using another computer to communicate with you and don't know what to do to solve this problem.  This same message/problem seems to resurface every year and made it for 2-3 years.  I resorted to an online, remote help to alleviate the problem in the past, and it still costs a lot of money to solve.  How can I FIX?

  See if that helps.

  http://www.bleepingcomputer.com/virus-removal/remove-total-security

• The window run JavaScript does not allow "<" to a string value.

  Does not allow to execute javascript window ' < ' in certain uses. For example it would not accept "if (x < y) {}", but it would allow "if (y > x)...". »

  In this case, I was able to work around it.

  An example, I can't work around attaches a string containing value ' < ':

  customCSS = "< style type =" text/css"> #myStyle {left: 1014px!}" important; top: 47px ;} < / style > ";

  It always divides the string after the "before the <."

  Does anyone know a way to escape to the < character? I know that I can do as an external function, but I am trying to create a current template with all the internal scripts.

  Thank you.

  I use an external CSS file that is published with the file.

  You can use JavaScript to write the new rule in a style sheet, or create a new. In this way, you don't have to use the

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Windows Media Player does not allow me to update track information

  I have Windows Media Player 12 on Windows 8 running and when I try to update the titles of songs, artists, genre, etc.  updates do not change the actual files.  I tried everything I found previous discussions and it has not solved the problem.

  What I've done

  (1) run the Windows media player troubleshooting library and search for the question - when I run the utility troubleshooting that indicates that the database is corrupted and one erases / reconstructions it however the problem persists once the database is rebuilt.

  (2) disable and enable Windows media player using the features Windows power solution - no change to my question.

  (3) run the fixit from following link: Fix Windows Media Player videos and other media or from the library - this tool is not available for Windows 8

  (4) running %LOCALAPPDATA%\Microsoft\Media Player and then deleting all files, forcing Media Player to rebuild - worked for a very short time and then the same question. When I tried this fix the 2nd no time no change, I can't update the portion of my files.

  It's everything I could possibly find it please someone help me!

  Hi Jessica,.

  As with any database, the information that is stored in the database or the database itself can be damaged. The Windows Media Player library database can usually recover automatically from the database. However, the database may be corrupted in such a way that Windows Media Player is unable to recover the database.

  a. press the Windows key + run , type %LOCALAPPDATA%\Microsoft\Media Player , and then click OK .
  b.Select allfiles in the folder and then clickdelete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  c.restart Windows Media Player.

       Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files . To do this, follow these steps:

  # If you are runningWindows 8/8.1, press Windows key + run, type %LOCALAPPDATA%\Microsoft and then click on OK.

  # Select thefolder Media Player and then click delete on the file menu.

  # Restart Windows Media Player .

  Note Windows Media Player automatically rebuilds the database.

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• DOES NOT ALLOW ME TO PRESS CONTINUE THE TRIAL

  HAVE INSTALLED AND UNINSTALLED THE ADOBE PROFFESSIONAL CS6 SEVERAL TIMES BUT IS NOT ALLOWING ME TO PRESS CONTINUE THE TRIAL.

  PLEASE CAN ANYONE SOLVE THIS PROBLEM?

  If your trial period is over (if you have used your 30days or not), there is nothing easier to make to extend the trial.

• Lightroom does not allow me to import photos...

  Hello!

  I have a MacBook Air and Lightroom 5. My MacBook is new, and I just installed Lightroom on it after having previously on my Windows laptop. Lightroom worked perfectly, but one day I tried to import pictures on my SD card, and the screen was completely empty. I clicked on the SD card, but no pictures appeared. Same thing if I clicked on one of my files. But the thing was, I had just imported pictures from the SD card five minutes ago and he has of worked, but now it shows nothing. Photo below.

  After doing a search fast on google, I found a person who had the same problem I had, and they solved by removing the preferences file, but I couldn't find that. Once finding that I am sure that the preferences file, I have renamed and restarted Lightroom, but it has not changed anything. I reinstalled Lightroom, but it did nothing. I have no idea what to do, but I can't do anything with Lightroom now since I can't import any of my photos. If anyone has any suggestions please let me know!

  Thank you!

  Click on copy to the top

  Make sure the Destination on the right section is expanded and visible

  Then click on add

• Windows live mail does not allow me

  frequently, when I'm on a web site, if I try to click on a link email out of this web site, I get a box that says: " could not perform this operation because the default mail client is not properly installed.» Example: I went to a web site of the NYS Government, I wanted to communicate with a person in a Department. When I clicked on this link of email from people, I got the answer that I have just listed. That happens frequently, and my local internet provider says it's a problem windows live? Other than that, my email works great.

  Bruce

  It is not a problem of windows live, but rather a configuration problem that is easily fixed.

  Start > Control Panel > default of programs > default program > find windows live mail and "set this program as default.

• Windows 8.0 does not allow to 8.1

  I recently bought a computer dell laptop and my connection is an administration, but when I try to download windows 8.1 I get a msg stating that I have not

  admin status.  Why do I get this msg?

  Hello

  I've read reports that uninstalling Windows Update KB2871389, and then put it back solves the problem.

  I read recently that this Fix - It might help...

  http://support.Microsoft.com/kb/971058/en-us

• hpqusgl.exe does not allow me to print from the web?

  I get this message whenever I try to print from the web on my old purchase of a Laserjet P2055dn 3 day... "" A website wants to open web content using this program on your computer "allow or do not allow. I say let despite this, I see that "this program doesn't have a valid digital signature that verifies its publisher. and the "details...". Program HP Imaging\bin\hpqusgl.exe"I can tick the box"do not display the warning for this program again", but to no avail.

  Printer - Laserjet P2055dn.

  OS - Windows Vista

  Thanks in advance for any help.

  Solved.  He returned to the store and bought a competitor's product.