Windows 10 mute on Boot Camp

Similar Questions

• I have windows 7 installed with boot camp.

  I have Windows 7 installed with boot camp and use it for some financial software and games. Is this compatible with El Capitan Win7 installation, if I update?  Thank you

  Yes. Please check that you have backups and disk not resized/re-partitioned, before the upgrade of the El Capitan. In addition, create a Windows system restore point before the upgrade.

• Problems with Windows 7RC in the Boot Camp Partition

  I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

  akuska wrote:

  I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.

  At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

  Although it is not supported, it will work however it depends what Guest select you when the virtual machine based on the creation of a regular file.  I don't got no problem using Windows Server 2008, when the virtual machine based on the creation of a regular file.

  On your Boot Camp partition was a clean build or you have an existing Boot Camp partition previously Virtual Machine.  If you had a Boot Camp existing partition previously Virtual Machine then try the following.

  ====================

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

  ====================

  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

  VMware is a company so I doubt that you have implemented the company however, your statement is a bit ambiguous because it is not clear if your always talk your partition Boot Camp Machine virtual matter in Fusion, you tried to select each of them as an OS on the entrance of Boot Camp partition on the Virtual Machine library and it didn't help the Boot Camp Virtual Machine partition number or to be issues with creating virtual machines with these operating systems.

• How to install windows 8.1 using boot camp on sierra os

  Im trying to install windows 8.1 64 bit on my end 2011 MacBook Pro using boot camp.

  I downloaded the ISO from Microsoft file and saved it in the downloads.

  i boot boot camp and she has 2 activated options are: software DOWNLOAD to apple support and the other is latest windows install or remove windows 10 or later.

  I'm not sure why it says windows 10 as it is not compatible with my mac earlier. anyway I check the two options and then bootcamp download all drivers and records them in my pendrive of 32GB.

  He then asks me what hard drive partition and I choose but then it says: he cannot find the installation file. I tried opening the file so it is mounted, but nothing works. I thought it's supposed to tell you what to do?

  Thanks for any help

  A Mac 2011 needs a physical DVD to install Windows and need to use the optical drive (CD/DVD). You cannot use an external CD/DVD drive.

  Please burn the ISO on a DVD-R SL and then click the installation option only.

• Recover Windows System Image in Boot Camp 10

  Hi all

  I have problems with Windows on my iMac.

  So I installed Win10 using the Boot Camp Assistant, partitioning 300 GB for it. After awhile, I realized I want to segment much more, so I tried looking for a way to extend this partition to 500 GB - I have tried it with a 3rd party app and didn't. I then created a Windows System Image, restored the fuser unit to a single OS X partition and reinstalled Windows with BCA - by then I had decided to partition 1 TB for each operating system. I installed with no problems and tried to recover Windows from the Image of the above system. But instead he apparently formatted my entire SDS, including the OS X partition, that the iMac will not start and more.

  [I have a backup Time Machine and everything, I also know I have to reinstall OS X and then restore from that backup.]

  The question is how to do what I tried bypassing Windows format the whole * thing. If this is not possible at all to recover from the image, I'll be forced to 'start from scratch' and I'd really rather not, 3rd party applications are welcome at this stage. Also, can I recover the files from the Image of the system?

  Thank you for your time,

  Bruncky

  PS. : Given that the Apple employee didn't know immediately what I was talking about: in Windows, a System Image is a 1:1 copy of my Windows partition around, as opposed to a backup that saves only files apps and not content generated by the app.

  PS2. : If I reinstall OS X from Recovery Mode, do I make specific configurations about the merger by car?

  BrunoBrunck wrote:

  But instead he apparently formatted my entire SDS, including the OS X partition, that the iMac will not start and more.

  This issue arises from a bad assumption made during the restorations by the process of restoration of Windows. It assumes that the restoration is made on the dedicated disk that has nothing else. Winclone is the best solution on Mac instead of Windows System Image backups. I have some time with a few users and I have tried with different levels of success. Please see Bootcamp not recognized after the restoration of Windows from image system for example.

  The question is how to do what I tried bypassing Windows format the whole * thing. If this is not possible at all to recover from the image, I'll be forced to 'start from scratch' and I'd really rather not, 3rd party applications are welcome at this stage.

  Try of Winclone.

  PS. : Given that the Apple employee didn't know immediately what I was talking about: in Windows, a System Image is a 1:1 copy of my Windows partition around, as opposed to a backup that saves only files apps and not content generated by the app.

  There may be some confusion between the Image of the system and the history of the files. Time Machine has no concept of an Image of the system, so it is also the terminology 'exotic '.

  PS2. : If I reinstall OS X from Recovery Mode, do I make specific configurations about the merger by car?

  No, unless you have built a custom Fusion car. If you have a Bootcamp partition on the drive of Fusion, you want to ensure that you're not crushing BC/Windows, unless a wipe/restoration is your goal.

• Can I install the same Windows 7 as a Boot Camp partition AND a VM regular partion?

  I've been running Windows 7 regular valuation as a VM partion.  Now that it is officially released, I bought a copy and I upgraded my Vista to Windows 7 partition and then I start under Boot Camp or Fusion 3 lets start the boot camp partition.  Starting time on a partition Boot Camp is a bit longer than on a normal partition of VM, so I find myself most of the time with the assessment of partition of the VM, but in June, it will go away.  Could I take the installation disk that I used for the Boot Camp and install it also as a regular virtual machine, or which will cause insurmountable problems for activation?  I hate to have to buy another copy of Windows 7 just to get a faster speed when I don't want to use the complete as machine when I boot Boot Camp.  Sometimes, I have to give Windows the power of the machine, so don't want to only install as a virtual machine.

  gebanks wrote:

  Well, I wouldn't mind a call to Microsoft if they'd let me activate both, but don't want to waste our time if they would certainly not.  Anyone try this?

  Ask yourself if someone illegally active copy of Windows?  This would be a pretty Brave soul to admit illegal activities.  :-\

  You only have one license for Windows if you are only allowed to have a single installation to be activated at any time.  Activate a second time to remove any other installation that uses the same license (aka product key), by the Windows EULA.  Another thing is the violation of the EULA.

  The 'Microsoft police' will come knocking at your door?  Who knows.  Microsoft has billions of dollars and could very well decide to use some of those dollars to make an example of a person, like how the RIAA did to people he considers pirates.    It of ultimately your decision whether to violate the EULA or not.

• Unable to connect to the network in Windows 7 using the Boot Camp via Fusion 2.0.4 partition

  I know that Windows 7 RC is not officially supported, but I was wondering if anyone had ideas regarding my current situation.  I'm running the RC 32 - bit of a Boot Camp partition, via merger on a unibody MacBook, and whenever I'm in Fusion Windows cannot connect to my network.  Previously, I had a vm file-based and it worked normally, and in Boot Camp, I can get online without problem.  I went to training Camp to see if the Aero effects would work (they did after I ran the test of Windows experience).  I tried mode Bridged and NAT and any Windows does not see my wireless network.

  At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as in the following example.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the Machine configuration file virtual .vmx take a look at the Beginner's Guide has VMware Fusion or gather Information for VMware Fusion.

  Note: You should make the change while Windows is shutdown, not suspended and merger closed.

  You can use TextEdit to edit the .vmx of the target Virtual Machine configuration file and locate the file...

  VMware Fusion (menu bar) > help > VMware Fusion help > navigation in VMware Fusion > using Virtual Machine library window > determine the location of the files from a virtual machine

  VMware Fusion (menu bar) > help > VMware Fusion help > using the Interface of VMware Fusion > work with Virtual Machine packages

• Microsoft Camera Codec Pack (16.0.0652.0621) - "couldn't write the Progid value to key" error - Windows 7 on Macbook/Boot camp

  I am trying to install the new codec from Microsoft to allow me to browse/preview of RAW files. I use Windows 7 as administrator on a MacBook Pro with the book Camp. The error I get is

  Could not write the Progid value to key
  \software\microsoft\windows\currentversion\explorer\fileExts codec\.arw\userchoice
  Check that you have sufficient access to that key or contact your support team
  I used the x 86 file on the site
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  Any ideas?
  Thank you.

  What a PITA, it was!

  1. go in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts

  2. right click on permissions

  3. click on advanced

  4 uncheck «include permissions inheritable...» »

  5. click on remove

  6. click on add

  7. tap all and press enter

  8. click on the control to total control

  9 check "replace all child object permissions...". »

  10. click on Yes

  11. click on OK

  12 run the installation. It should go right now

  Once completed

  Repeat steps 1 to 3.

  4. check «include permissions inheritable...» »
  5. check "replace all child object permissions...". »
  6. click on Yes
  7. click on all members of the list of albums
  8. click on remove
  9. click on OK
  This should be it. Hope this helps everyone and MS solves the problem.

• Deadlock in Windows Update - Windows 7 running on Boot Camp

  This is a new installation by using a product key and everything seem to be working now EXCEPT Windows Update - there's always the search. How can I get the life in it?

  Hello

  I realize has the inconvenience that you are experiencing with Windows updates. I will certainly help you to question.

  However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You get the error message when running Windows Update?
  2. Is the internet connection slow or intermittent?

  The question may arise if the Windows downloaded update packages are corrupt. As you have already tried to run the Windows Update Troubleshooter, I suggest to try the steps in the following article and check if the problem persists.

  You cannot install updates in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 KB
  How to back up and restore the registry in Windows

  Chkdsk WARNING: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Additional information:

  Problems with installing updates

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• How to create multiple partitions to the boot camp windows 10?

  Hello

  I have a Macbook pro 2015 with 1 TB of HDD and installed 10 windows on it using boot camp with a size of 500 GB for windows.

  Now can I do 500 GB in three to leave different using "Disk management" on windows?

  If I do that it will cause problems?

  harshav339 wrote:

  Hello

  I have a Macbook pro 2015 with 1 TB of HDD and installed 10 windows on it using boot camp with a size of 500 GB for windows.

  Now can I do 500 GB in three to leave different using "Disk management" on windows?

  If I do that it will cause problems?

  -on-Windows-disk-for-Bootcamp-OS-x http://superuser.com/questions/944815/is-is-possible-to-have-multiple-partitions

• Boot Camp will not install on Windows 10 (end of 2015 imac)

  Bought an imac 27 "5K retina, end of 2015

  1 TB - (not the Fusion drive)

  OS X El Capitan

  All applications are updated on both OSX

  Version of Windows 10 Education loaded 64 bit ISO file (3 times 2 of 1 Flash of office)

  After loading Windows 10 - installation of Boot Camp program starts - but after a few minutes, I get a little window with a red X

  The installation stops (I tried the OK TWO hit and hit X to close small, then the windows in the "Installation")

  But no Boot Camp file is installed (worked with Apple Care - but they don't have any other suggestions.)

  How can I get the Boot Camp assistant on the Windows partition? I can't find Boot Camp 6 downloads anywhere.

  I don't have files from Boot Camp on side Windows to run (or disk Flash Drive)

  Windows runs and work THOUGH - I have questions - no sound, the mouse does not scroll, have not spent a lot of time to discover other issues.

  Another thing to NOTE - on the side of OS x with Boot Camp Assistant - I don't get always the choice to select tasks - that is not available - my boot camp assistant didn't need to start from a flashdrive (external drive) it will be the start of a download of office. I thought to use Boot Camp Assistant to load the ISO on the flash drive - but I do not get this option (select tasks).

  Any help is appreciated - is there an external way to download Boot Camp 6?

  1. What is your Windows language setting?

  2. you can get the drivers BC6 W10 from Apple.

  

• 'Boot Camp 6' will not install the drivers of "Key board" on windows 10!

  Hello

  Yesterday I received my installation "Windows 10" doesn't work anymore, when I tried to boot into windows, a BSOD.

  It's the error: "(KeyMagic.sys) System_Thread_Exception_Not_Handled.

  I tried several solutions, but none of them helped.

  I removed my boot camp partition and to install windows again and this time it's the same thing when I was installing boot camp drivers after a successful News '10 Windows' installation!

  After reboot I reinstalled successfully boot camp drivers, but the function of the keyboard keys does not work, in fact it completely does not recognize the keyboard!

  What can I do to solve this problem of blue screen of death?

  Finally, I was able to get my problem is solved as follows:

  1. I removed my existing Windows Partition

  2. I installed all the updates that are recommended for my 'Mac OS X' of 'Mac App Store'

  3. I created "Support of Windows Setup" again, using "Boot Camp Assistant".

  4. first of all, I checked the first 2 options to create 'Windows Installer' and 'Download Support Windows software' and then after that it's over, I did it again "Boot Camp Assistant" and I chose only 3rd option to create a partition and install windows

  5. Once successfully installed Windows, I installed "Boot Camp" without any problems and everything works fine!

• Changed the size of the Windows Boot Camp Partition - now merger does not

  My Windows partition was too large, so I used the scroll bar in Boot Camp to reduce its size.  Start directly on Windows (via system preferences) works very well.  However, I got an error message (I should have written it, but it didn't) when you try to start Windows using the merger.  I uninstalled and reinstalled the merger, but now when I start it up I got a message "no boot device found".  I would still be able to use the merger through the Boot Camp partition.  My thought is that the easiest way would be to completely remove Fusion, because the Boot Camp partition works fine on its own.  Apparently, the rest backout package still some files on the hard drive that caused the errors after reinstall.

  Any ideas on how to remove all traces of Fusion I can do a completely new reinstall?

  VMware Fusion of uninstalling/reinstalling will not solve this problem, and all you have to do is delete the partition Boot Camp package of Virtual Machine that is basically just meta-data and does not affect the physical Boot Camp partition by deleting.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• resize boot camp partition, formatted and installed windows 7 - now cannot open in vmware fusion

  Here are the steps that I took...

  1 has started with the copy of Windows XP in the boot camp partition. "This is accessible from VMWare Fusion."

  2 resized (from 6 GB to 18 GB) and formatted the boot camp partition.

  3 successfully installed Windows 7 directly in the resized partition boot camp (not through VMWare Fusion).

  4. starts in OSX (latest version), open VMWare Fusion and attempted to access the partition to boot camp/vm. Received an error message charging me to disassemble and reassemble the physical disk changes. However, since I did it, he cannot find a bootable disc, therfore making it the useless bootcamp VM.

  Any help would be appreciated.

  Paul

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Boot Camp Partition Storage

  I have a MacBook Air (13 inches early 2015), with a 1.8 Ghz Intel Core i5.  My OS is OS X El Capitan (10.11.13)

  I tried to install Windows 8.1 on Boot Camp. I went through all the steps, and it wouldn't let me install because the Boot Camp has not been formatted to NTFS. I restarted my Mac in order to repair, but whenever I try to log in a sort of code would jump upward and my Mac would break. I finally got and restored the storage of partition. When he had finished, a message said that it could not be restored. I don't think anything of it until I checked my storage and my Flash storage was 123 against 80, 53 GB have disappeared. Help, please!

  Hello Dschreck,

  I understand you have experienced the loss of storage after trying to install Windows using Boot Camp. I know how about them can at any time be storage seems to have disappeared. I'm here to help.

  If you can boot into OS X, please use the "Erase your drive and install OS X" part tracking from the following link:

  Important: Before you remove and reinstall, back up your important files. If you are using a MacBook, MacBook Air or MacBook Pro, make sure that the power adapter is connected and plugged all by performing the following steps.

  How to reinstall OS X on your Mac

  If you are unable to boot in OS X you can use target disk mode on another computer to save your content.

  Share files between two computers with target disk mode

  Thank you for using communities of Apple Support.

  Have a great day!