Windows 10 not supported for Satellite U940

Similar Questions

• Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

  Dear support,

  I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

  Pls can update you with the new drivers of windows 8, which his slove my problem.

  Thanks in advance

  Concerning

  Vermorel

  Hi Majusko,

  If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

  HP LaserJet and Color LaserJet - Windows 8 media

  HP trade-in program

• Need drivers for Windows 7 x 64 for Satellite P200 (PSPB6E-1C501FGR)

  Need drivers for Windows 7 x 64 for Satellite

  I have a few questions.

  I've got Satellite P200 (PSPB6E-1C501FGR) and I was wondering is it possible to install 64 bit Windows 7 on this computer and when windows 7 x 64 drivers coming for download?
  For HD DVD player, card reader, camera and other drivers and programs we work on my laptop.

  Hey Buddy,

  At first please check this document: http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm

  Here you can see the Satellite P200 is official not Windows 7 supported and you will have to collect the drivers yourself and perhaps on external Web sites too.

  What can you do now? I recommend you to install the Windows Vista drivers. Most of them are also work on Windows 7.
  Check this box!

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• Windows could not search for new updates. Code 80072EE2

  First, some background...

  I am running Windows Server 2008 / Hyper-V

  I have a Vista OS guest I have loaded from a base image (vhd)

  I also have a Server 2008 guest OS also loaded from a base image

  These images have not been created on this machine.

  I had guest OS installed since the XP CD but since she departed.

  The machine on which it is all performed has a 2.93 GHz Intel Core 2 X 6800 processor.

  8 GB DDR2 RAM

  I've had this problem for several weeks now.  At the beginning I could not the host OS to run updates, it would fail with an error 80072EFE code. This is for several weeks. Finally, while researching this problem I came across an entry mentioning only the BITS required to run so double I checked it. Of course, it was off. I started the service and that fixed the problem with the host operating system and apparently the problems she was having with other sites.

  So I think big is issues with the Vista and the comments of 2008 operating system. No luck, these systems still will not run updates.  The 2008 operating system returns an error "Windows could not search for updates" with a code error 80072EE2

  I tried several solutions to this problem, and at least twice have reloaded the base images because I mucked in the system so much that I lost track of all the changes I had made to the OS.

  I ran these commands...

  regsvr32 /s c:\windows\system32\wuapi.dll
  regsvr32 /s wuaueng1.dll
  regsvr32 /s c:\windows\system32\wuaueng.dll
  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll
  regsvr32 /s wups2.dll
  regsvr32 /s c:\windows\system32\wups.dll
  regsvr32 /s wuweb.dll

  I also tried the procedure found here...

  http://social.answers.Microsoft.com/forums/en-SG/vistawu/thread/6511a332-7de3-4F10-B823-49b6dae86b9c

  Which loads a new "TrustedInstaller.exe" in the folder "C:\windows\Servicing\".

  And on the Vista operating system I also tried this...

  http://support.Microsoft.com/kb/971058

  By clicking on the "Fix It" link.

  It still does not.

  Oddly if that I'm typing this I had rebooted the OS Vista and restart it it notafied me that he was installing updates 1 of 3. However when it finished I tried to check the updates and it gives me the same error "Windows can not find updates" with a code error 80072EE2.

  Someone at - he found an answer to this question. I ask because I'm looking for what I see many people with the same issue.

  You may encounter temporary connection errors [e.g., 80072EE2] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services

• About what will be Windows XP not supported by Microsoft (not updated)?

  When will be Windows XP not supported by Microsoft (not updated)?

  Computers running under that WinXP SP2 will NOT be offered additional updates of security reviews, automatic updates will stop working, and the Windows Update Web site will not be available after July 10, 2010, until that SP3 is installed.

  Extended support for WinXP SP3 will continue until April 2014.

  CF. http://blogs.technet.com/lifecycle/archive/2009/04/14/extended-support-begins-for-windows-xp-and-continues-until-2014.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help! This version of Windows does not support this version of Windows Media Technologies.

  I got this error message when I tried to install Hotel Giant 2. Don't really know what to do... Pls help! Contact Microsoft Corporation support This version of Windows does not support this version of Windows Media Technologies. This product, which was created by Microsoft Corporation, has been blocked from running because it can prevent your computer from starting correctly in the future. Recommendation

  Hi Dot77,

  Thanks for posting on the Forum of answers.

  I suggest to download the patch from the site Web of Nobilis.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not search for new updates, error: 80070005, 80072F8F

  An erroe message appears when you try to download windows updates. I tried to use Microsoft difficulty It Center and it is said that repairs need to be made, it has been fixed, but the problem won't go away. Trying to submitt a request for assistance to Microsoft, but it is not available (?).  I was not able to download the updates of windows since 08/03/2012

  80072F8F

  Make sure that the date and including Internet Zone are correct on your computer.
  You may need to restart after the synchronization of time of your computer, etc..

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  Error message when you search for updates in Windows Vista: "Windows could not search for new updates (Code 80072F8F)".
  http://support.Microsoft.com/kb/929458

  Error 80070005

  http://support.Microsoft.com/kb/968003/
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates). The other alternative is virus/malware.

• Error code 80072EE2: Windows could not search for new updates.

  I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

  Hello

  Did you face this problem after installation of McAfee?

  Follow these steps:

  Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

  Windows Update error 80072ee2
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Run the Fixit and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

   

  Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Windows could not search for new updates. Error 8024402f code. Fix available?

  Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be repaired and there is no problem, but in fact it is not the problem. Updates have been arrested?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  If the fixit doesn't do the trick, you will need to manually go through the troubleshooting utility.

• Windows could not search for new updates (error 800F080D)

  original title: Windows could not search for new updates

  Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

  HI gdm21,

  Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

  Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

  Do you get errors when you run this?

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul