Windows 10 shows a bad time in boot camp

Similar Questions

• How can I disable the Windows of Parallels key for use with Boot Camp instead (same Mac)?

  I have a Windows 7 key I used with Parallels (on my Mac). I was unable to uninstall Parallels, and now I want to use my key Windows with Boot Camp instead. How can I turn off the key to the prior use (same computer)? Is this possible?

  Unfortunately, I am not able to return to Parallels. (I upgraded my Mac o/s to an incompatible version with the version of Parallels, I had installed).

  Thanks for the suggestion, if!

  I'll try MS service the customer the morning... wish me luck!

  Just proceed to install Windows 7 in Boot Camp and reactivate by telephone by following the instructions.

• I could install a copy of Windows (via Boot Camp) on my external drive for Time Machine without erasing my backups?

  I want to use Windows 10 (for games) on my 2013 MacBook Air (13 ", 128GB flash, 1.3 GHz Intel i5, 4 GB of RAM), but I want to install it on my external hard drive because I am almost out of space SSD (34 GB remaining), and I know how large windows is. I have an external 1 TB harddrive that I use for my backups Time Machine, and I was wondering if I could transfer my copy of Windows hard disk external and implemented via Boot Camp. Is there a way to partition my drive so that my backup and Windows can both be there? And is there a way to trick Windows in race (start) from the external hard drive?

  Lol as the second partition on the boot volume. None of the other partitions will be allowed thereafter.

• Boot Camp will not install on Windows 10 (end of 2015 imac)

  Bought an imac 27 "5K retina, end of 2015

  1 TB - (not the Fusion drive)

  OS X El Capitan

  All applications are updated on both OSX

  Version of Windows 10 Education loaded 64 bit ISO file (3 times 2 of 1 Flash of office)

  After loading Windows 10 - installation of Boot Camp program starts - but after a few minutes, I get a little window with a red X

  The installation stops (I tried the OK TWO hit and hit X to close small, then the windows in the "Installation")

  But no Boot Camp file is installed (worked with Apple Care - but they don't have any other suggestions.)

  How can I get the Boot Camp assistant on the Windows partition? I can't find Boot Camp 6 downloads anywhere.

  I don't have files from Boot Camp on side Windows to run (or disk Flash Drive)

  Windows runs and work THOUGH - I have questions - no sound, the mouse does not scroll, have not spent a lot of time to discover other issues.

  Another thing to NOTE - on the side of OS x with Boot Camp Assistant - I don't get always the choice to select tasks - that is not available - my boot camp assistant didn't need to start from a flashdrive (external drive) it will be the start of a download of office. I thought to use Boot Camp Assistant to load the ISO on the flash drive - but I do not get this option (select tasks).

  Any help is appreciated - is there an external way to download Boot Camp 6?

  1. What is your Windows language setting?

  2. you can get the drivers BC6 W10 from Apple.

  

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• resize boot camp partition, formatted and installed windows 7 - now cannot open in vmware fusion

  Here are the steps that I took...

  1 has started with the copy of Windows XP in the boot camp partition. "This is accessible from VMWare Fusion."

  2 resized (from 6 GB to 18 GB) and formatted the boot camp partition.

  3 successfully installed Windows 7 directly in the resized partition boot camp (not through VMWare Fusion).

  4. starts in OSX (latest version), open VMWare Fusion and attempted to access the partition to boot camp/vm. Received an error message charging me to disassemble and reassemble the physical disk changes. However, since I did it, he cannot find a bootable disc, therfore making it the useless bootcamp VM.

  Any help would be appreciated.

  Paul

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.

• problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

  Hello guys,.

  I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

  The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

  I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

  I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

  Any suggestions?

  The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

  C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

  You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

• A Boot Camp Partition, two Machines virtual VMware Fusion

  After the installation of the Boot Drive Partition *, I see now two versions of the Virtual Machine Boot Camp. Is this normal? Can I delete one with no impact on my Boot Camp? Should I remove VMware Fusion altogether and reinstall so that I can have a clean virtual machine only the partition boot camp?

  *It is on a separate post, but can be linked... Initially, I installed VMware Fusion, without first running training Camp and installed a Microsoft XP operating system on it. It stopped working and I had a lot of problems with Windows that I decided to do a new installation, but this time using Boot Camp. I can see two VMS, (actually 3*), but I want to remove the first virtual machine without Boot Camp. I tried the virtual machine under users/Documents/Virtual Machines, but the directory is empty. I deleted the directory, just in case. When I returned to VMware Fusion, it can still start the virtual machine. I looked through the finder and can't find it. If not, how can I remove this virtual computer and free up space for the Mac?  (No need to answer this question if it is not related to the top)

  Take a look at: duplicate entries on the Virtual Machine Library dialog box

• When the old Macs will support Win 10 install via Boot Camp

  Currently oldest Apple machines don't support not Windows 10 when it is installed via Boot Camp - using 10 Windows on your Mac with Boot Camp - Apple support I do a fresh install of Windows on my MBA 2011 environment which is not listed as being supported - obviously a lot I prefer not to buy and install Windows 8.1 (which is supported using 8.1 for Windows on your Mac with Boot Camp - Apple support) and then more later to buy (now MS free upgrade offer was withdrawn) and install Windows 10.

  Apple will fix this situation ensuring that older machines are supported on Windows 10 and if so when?

  not sure that they will not be 99%

  your options are to install windows as a virtual machine 10 using something like oracles free box virtual vm

  or like me who was to install windows 7 in bootcamp and when win8 came out I've updated win7 from inside win7 for win8 and later to win8.1 then win10 and now 1 year win10 editing, there is no official driver win10 for my system as it is so there mix of win8 drivers and drivers win7 and some features are absent as access to osx workout and bootcamp tool

• Issue of boot camp

  If I install Bootcamp on my iMac will I still have my mac files it can change between iOS and windows?

  And can I install boot camp on an HDA disk extern?

  Bootcamp take a portion defined by you to your hard drive in my case, I had a 2 to hd and divided into 1 TB for windows and 1 TB for osx

  When I press option or with my windows left the keyboard down Alt key when it starts up I get a list where I can choose if I want to start osx and windows

  Windows we see the mac part of your hard drive read-only and even OSX with the part of windows

  Windows itself is not officially supported running on an external hard drive so I would say no, but people usually find ways and I don't know if windows see love at first sight connected external drive as it would a usb connected.

• How to remove the boot camp on my pc?

  I have to delete the boot camp to increase memory Mac

  As the Assistant Boot Camp is a part of Mac OS X to create a partition to install Windows, I don't really think that you really want to delete it.

  Instead, I think that you want to delete the partition that contains Windows and which is made from the Boot Camp Assistant. For instructions on reading this Boot Camp: Remove Windows from your Mac

• Boot Camp and select the operating system

  I installed Windows 7 and can not see where boot camp is installed.

  Windows is the default system, but I want to return to the ability to choose what system I use at startup.  Which key I want when starting to give me the disks/partitions to start for both systems.

  Thank you

  Use the Alt/Option key or install drivers of BC that have a set of applications. Please visit https://help.apple.com/bootcamp/controlpanel/5.1/ .

• Impossible to install Boot Camp support software

  I have a MacBook Pro retina 13 end of 2013, running the Mavericks 10.9.1.

  I installed the latest version of VMWare Fusion (6.02), then install version 8.1 of Windows Pro 64-bit. And I installed VMWare tools in Windows.

  When I try to use the external Superdrive (USB) drive in windows, I get a message from VMWare saying I need to download Boot Camp support software to be able to use the Superdrive drive.

  I followed the instructions, first of the Boot Camp Assistant, then downloading the software from Apple support. When I try to install the Boot Camp support software in Windows, I get the following error:

  "This version of Boot Camp is not intended for this model of computer." I've attached a screenshot of the error.

  The version of the software support that Apple, I downloaded is 5.1.5640, which says it is the right version for my MacBook and the version of Windows.

  I'm not under Boot Camp itself. I want to just install the supported drivers, by what VMWare me.

  Is there a solution?

  Try to simply execute the file AppleODDInstaller64.exe to: Boot Camp > drivers > Apple

  From the AppleODD64.inf file, which I extracted the file above:

  

  FWIW, I've never had to install a driver for my SuperDrive drive in a normal file Virtual Machine based on, not to use Boot Camp, and I can't read/write CD/DVD without any problem when connecting to the host.  Normally if I just leave it plugged into the Mac and the customer can see the disc fine.