Windows 10 sleep and shut down problem bootcamp

Similar Questions

• Startup and shut down problems on Sony VGN-AR51SU laptop with Vista Ultimate

  I have a Sony VGN-AR51SU laptop which has Vista Ultimate preloaded when it was purchased. The windows product key is noted on the underside of the computer.

  The computer is configured to close, either by closing the lid or will the icon start then shut down. I don't remember which option I used to shut down the computer.
  However when I press the power button the computer immediately emits three short beeps. The hard disk icon flashes as if it is starting, but the LCD display remains black and never even a blue screen comes. Devices powered by the computer the light upward.
  Eventuallu the hard drive icon will stop blinking.
  When I put the cover towards the bottom of the computer behaves as if it ends and all devices close but the power of the computer remains on, regardless whether I am with the main power or battery.
  Obviously I can not use the starting/closing track that I have a black screen.
  I tried all the options to remove lead AC and battery close and all devices, then re-boot just on AC power or battery or any combination of these options, etc etc etc and nothing makes a little difference.
  I keep my system and software updated and this problem was one of sudden nature IE. OK one day then the problem the next time I turned on the computer.
  Make three short beeps on start uo and the fact that the screen remains black gives a clue as to the problem?

  Hi Taked,

  This seems to be a hardware problem. You must contact Sony support for assistance on the issue.

  Contact Sony technical support

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact&SR=NAV:support:Electronics:contact_support:ESUP

• The sweet mouse bow and matching carbon ThinkPad Lenovo X 1. computer sleeps or shuts down the mouse is more matched

  Original title: Arcsoft mouse and Lenovo ThinkPad matching

  I recently bought a Lenovo X 1 carbon and it's running windows 7 pro.  I tried to pair the mouse Microsoft Arcsoft Touch with this laptop and it worked.

  Unfortunately every time that the computer sleeps or shuts down the mouse is more matched.  The only way I've found is to reconnect is to add it again as a new device.

  IT appears in my device as; Manager

  (1) HID device

  (2) mouse

  Neither gives me the ability to disable powersaving disconnect for this device (if it appeared in my Bluetooth radio devices I would try this)

  There must be a way to get the computer to recognize and default to this unit?

  Hi Jeff,

  Thanks for posting on Microsoft Communities!

  1. check the problem by plugging another Bluetooth device

  I suggest you follow the steps by Althaus responded on 30 October 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/why-Bluetooth-mouse-keeps-on-disconnecting-in/4d6587f2-A1E9-4486-8a1d-07299cc78d7c?page=1&TM=1428921131740

  Hope the helps of information. Keep us updated on the status of the issue persists. We will be happy to help you.

• My sleep, put into hibernation and shut down the Start button went from Vista Home Premium.

  When I go to the right of my Start button and try to Hibernate, sleep, or shut down my computer, all the buttons are gone. Now, I don't see that "change of user, logoff or lock. Now, in order to stop, I have to go to the Start button and to the right, the trunk, which brings back me to a screen to logon with a red box and an arrow at the bottom right of my screen. It of only then when it allows me to shutdown my computer. Can anyone help.

  Hello

  How to remove or display the Start Menu in Vista shutdown Options
  http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.html

  Button missing in the Vista Start menu
  http://www.Visser.com.au/blog/missing-shutdown-button-in-Vista-Start-menu/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• Windows was not properly shut down

  Hello everyone

  This is my first time here on this forum and I have a serious problem with my PC.

  on a random time my PC stops immediately without a blue screen or something.

  I already check my diary and here they say "Windows was not properly shut down.

  I have download a PC cleaning software demo 'System Mechanic Pro', but that didn't help me :(

  Most of the time it's happen, it's when I watch a video on Youtube or another website.

  I hope someone has a solution for me.

  Thanks in advance!

  -Fresh ~ Aurora

  (Sorry for my bad English if you can't read!)

  FA

  There are many things that can generate people.  For example, if you push and hold the power button, the system broke down, or if the battery is dead.  They are not essential and should only be worrying if there are problems that are associated.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Satellite Pro P500 - standby and Shut Down crashing

  I have a Satellite P500. Bought new with Windows 7. It is new and has had a bad hard drive replaced.

  Since then, I've reconfigured everything and everything seems to be working - except when the sleep and the closure are activated, they do not work. Stop going just to close to the bottom of the screen and stays there for centuries until I force a stop down by holding down the power button. She won't be in standby mode and Hibernate properly either - drafts of the screen and hard drive starts to do something, but system remains active and fan works.

  I found another forum thread where something similar happening in the model of the A300, and someone suggested to turn off the wake-up on LAN and keyboard settings. Both of these Jefferson already out on it so go there.

  Help is greatly appreciated.

  Hello

  IF your laptop hangs on farm screen and doesn't go into hibernation/standby layout, I think that it s not bound as a result of the functions in the BIOS. This is more important if your computer starts up without any reason.

  Anyway, in your case I would of BIOS update.

  If this doesn t work you should try to reinstall Windows. This could also be a software problem.

• Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

  My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

  So far I have tried:

  -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

  -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

  -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

  -Another forum suggested turning off the M-Audio card.  Tasted it.

  -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

  Suggestions of new, I can add to the list?

  After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

  ET1

• Windows 7 will not shut down or restart

  Hi guys, basically for the 3 days since my computer won't shut down or restart. I normally turn off every night and I've never had this problem before. I used the tool to update window update, but it says that it cannot complete the installation until I restart, but obviously I can't do that either.

  I tried to change the power does-that is to say buttons when the laptop closed = stop down. But even that won't work.

  Anyone has any ideas that could help me solve this problem?

  Thank you.

  Not sure, but what about the command 'shutdown '? (perhaps with the /r (reboot) option)

  http://TechNet.Microsoft.com/en-us/library/cc732503%28V=WS.10%29.aspx

  or

  http://pcsupport.about.com/od/commandlinereference/p/shutdown-command.htm

• Windows 7 won't Shut Down - continues to restart

  Hi all

  I can't get my new HP 6550 probook b to close. I can force by using the power button, but I can't stop using the Shut Down options on the screen. Can someone help me? When I force using the power button, I get a black screen that tells me that the computer has not been closed correctly and that I can't continue in safe mode. I need a solution because it drives me crazy!

  Hi Toronto1982,

  1. what happens when you try to shut down the computer?

  2. Since when are you facing this problem?

  Step 1

  Check if the problem occurs in safe mode.

  Start in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put your computer to boot in order to check if the problem is caused by any application.
  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Start in normal mode and check the status.

  Step 3

  If the problem persists, check the event viewer.

  What are the information in event logs? (Event Viewer)
  b http://Windows.Microsoft.com/en-US/Windows-Vista/What-information-appears-in-event-logs-Event-Viewer

  REFERENCE:
  A computer that is running Windows 7 does not start when force you the computer to shut down
  http://support.Microsoft.com/kb/974719

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• My startup noise and shut down sound is missing

  My start and knew low noise is absent. The rest of his work ok. I have worked on this problem for some time and have tried everything I found on the internet Microsoft form other sources. Sewing of every thing to be turned on. Could this be something in the registry that is missing.

  No, it has not solved the problem thanks
  I can find sound and audio devices but not the event sounds and programs. I don't see test mode in a sound and audio device.  The start up and closed down wav file is present. I have test the wav file using windows media player and it does not work.  Is my my problem some were in the resistance.
  I worked on this problem for some time.  I have another copy of XP on the same computer and the stat up and works stops when I run. Then, I know nothing wrong with my hardware.  Why have I not another copy of XP on my computer. Well, he had so many problems, I just started a new copy of XP to repair the damage.

  Thank you, Glenn

• Fan and shut down

  Hello guys,.

  When I play video games, the fan is very loud, and when I leave the game, the Mac is running more slowly than usual for about the first five minutes. If I want to stop immediately after leaving the game, I let my Mac cool before shutting down, or can I simply arrested him while the fan still work very hard?

  The reason for my question is that I am curious to know if it is "unhealthy" for the Mac to go from 100 to 0 just like that instead of let go from 100 to 0 and then stopping.

  Thank you in advance!

  Kind regards

  Mads

  There is the thermal shutdown circuits in the MBP that prevents the MBP to destroy oneself against excessive heat.  It makes no significant difference when you turn it off.

  Ciao.

• My Acer Aspire X 3810 overheats and shuts down. What can I do to fix this?

  Overheating it turns off how to turn it back on again and no other problems with the pc itself.

  overheating only when I play some games online but like World of Warcraft. Can anyone please help and tell me what I need to do?

  Problem fixed for now, I moved just the PC if the fan is sitting next to my window and it has not overheated since.

• Windows 7 audio and video stutter problem

  Recently when I watch videos (be it youtube, shake, DVD or videos on my hard drive) apparently at random my audio and video will be stutter.

  I tried to disable hardware acceleration, it did not help. I have the latest video and audio drivers (that I know) and it seems to happen more predictable when I run a software intensive treatment like utorrent, it is not get recorded by the recorder of camtasia studio or bandicam (first being a screenshot while the second is a game of capture) I tried to catch in the Act to make a short video to demonstrate the problem , but he has not registered. the video seems quite well with no stutter.
  I have: Windows 7 Home premium 64-bit
  graphics card: NVIDIA GeForce GTX 660 (tested by alienware benchmarking to work perfectly)
  Processor: Intel Core i7-3820 CPU @3. 60 GHz quad core
  Under "sound video and game controllers" in Device Manager there: NVIDIA High Definition audio.
  NVidia, Virtual Audio Device (extensible wave) (WDM)
  Realtek High Definition Audio
  All claiming to have the latest drivers when I have them check for them.
  My version of windows is up to date and I am completely baffled because I did not install anything new in the last few weeks, but this problem started about 2 weeks ago.
  What is my problem? Y at - he of the info, I did not think I should? If so let me know what and I will update this
  Update 1: this issue is still not resolved, despite the installation of codecs and update of the adobe flash player, I always get the question every time I launch a program or open a new tab in google chrome

  I had the same problem. I have exeprienced a random 1-2 dry freeze when I played games online (for example, League of Legends, Maple Story, etc.) or on my gaming laptop youtube videos. After countless trials and errors, the problem solved when I disabled the "NVIDIA device Audio (Extensible Wave) (WDM)"audio driver in Device Manager. The man was this frustrating...

  Kind regards